Home  |  Shipping Rates  |  My Account  |  Cart Contents  |  Checkout  | Allergies Info | Links | Sitemap
Call Us: (800) 578-5939 or (760) 632-7286 // M-F 6 a.m - 6 p.m. and Sat-Sun 7 a.m - 3 p.m. Pacific Standard Time
Categories Air Purification Air Purifiers & Ionizers Ceiling / Flush Mount Filtration Commercial Air Filtration Fans Hepa Filtration Hospital/Dental Grade Filtration Negative Ionizers Personal Air Purifiers Travel Air Purifiers Whole House Filtration Bedding Solutions Comforters Down Alternatives Down Blankets/Throws Feather Beds Pillows - Foam Pillows - Natural Pillows-Synthetic Cleaning Products Cleansing & Detox Dehumidifiers Dust Mites Home Test Kits Kitchen Aids Personal Allergy Relief Pet Allergies Replacement Parts Air Purification Replacement Parts Dehumidifier Parts & Accessories Vacuum Parts & Accessories Vapor Steam Cleaner Parts & Acceories Shop by Brands Air Quality Engineering Airfree Airpura Airwise AllerAir Allerpet Allersafe Amaircare Aranizer Austin Air CWREnviro ElectroCorp EnviroSept Eureka Eva-Dry HydroMed IQAir MiracleAir Nilfisk NQ Industries Organic Excellence Pacific Coast Pentex PRO-LAB Restful Nights Spring Air Sunpentown Therma-Stor Vapor Technologies Woods Vacuum Cleaners Vapor Steam Cleaners   Information Newsletter Signup Contact Us Privacy Policy   This is a Secure Shopping Site protected by 128-bit encryption. Guaranteed Safe
	Air Purification   Air Purifiers & Ionizers Ceiling / Flush Mount Filtration Commercial Air Filtration Fans Hepa Filtration Hospital/Dental Grade Filtration Negative Ionizers Personal Air Purifiers Travel Air Purifiers Whole House Filtration       Product  Price  View      EnviroSept Whole House Furnace Panel Filters  The Envirosept electronic furnace filter was tested by an independent laboratory and was found to remove up to 99% (Arrestance) of all particles as small as 1 micron in a single pass and up to 70% of sub-micron particles (Efficiency) form the air on a single pass through the filter. The EnviroSept Electronic Air Cleaner whole-house model simply replaces the existing filter(s) in your home's forced air heating or A/C system and it's available in thirty-five standard sizes. The EnviroSept Electronic Furnace Panel Filter is a highly efficient, non-ionizing, non-ozone producing, electronically enhanced filter which utilizes the concept of DIELECTRIC POLARIZATION to effectively remove sub-micron particles down to .001 micron in size. The EnviroSept Whole House Panel Filter easily replaces most existing filters. Its 24 Volt AC Adapter can be plugged into any standard electrical outlet. 5 Year warranty. Complete installation instructions included with each unit. Benefits: Produces cleaner air by removing up to 99% of all airborne particles 1 micron or greater. Allergy, asthma and hay fever symptoms may be relieved as irritating pollens, dust and molds are removed from the air. Drapes, carpets, furniture and walls stay cleaner longer because dirt buildup is reduced on interior surfaces. Fresher smell with the reduction of particle-borne odors from cooking, smoking, pets, cleaners and paints. Environmentally sound, since it does not produce harmful ozone gases. Easy installation for new and existing air handling systems. Replaces existing filters and its 24-volt AC power supply can plug into any standard electrical outlet. Inexpensive disposable collector pads are easily replaced as required. Saves money - costs up to 70% less than most electrostatic products and uses 95% less electrical consumption. EnviroSept five-year limited warranty. Repair or replacement will occur within a reasonable period of time for any part that proves defective in materials and/or workmanship under normal installation, use and service. EnviroSept - Ordering the Correct Size Each EnviroSept Electronic Furnace Air Filter Cleaner unit comes complete with is own 24 volt power supply adapter with 6 foot cord and 14 replacement collector pads (2 inside unit and 12 spares). EnviroSept is currently available in 35 sizes per the following chart. EnviroSept is designed to be a direct replacement for an existing 1" filter that may be currently installed in the HVAC system. Our model #s are designed to be the approximate size of the filter. An example of EnviroSept model # EAF-2020 which fits a 20 x 20 size, is actually (19 ½ x 19 ½). We are usually within a ¼ inch smaller to allow for the hinges and closure clips. The Envirosept is MOST effective when HVAC Fan is on 24/7. This way you are filtering the houses air all the time. EnviroSept Replacement Collector Pads: The collector pads are provided twelve pieces per box. To order your collector pads, refer to the model EAF # on EnviroSept or the box that unit came in. SIZES - Units are 1" Thick 12x12 12x20 12x24 12x25 13x22 13x25 14x20 14x24 14x25 14x30 15x20 16x16 16x20 16x21 16x22 16x24 16x25 17x19 17x22 18x24 19x22 20x20 20x22 20x24 20x25 20x30 22x23 22x24 23x25 24x24 24x28 24x30 25x25 28x30 30x32 These are the 25 Standard Sizes (Green) and 8 Oversized Sizes (Yellow) and 2 XOversized Sizes(Red) that are Available for EnviroSept Whole Home Vent Duct System! Power and Electronics are on the Shortest side. (Exp: For a 16 x 20, Power and Electronics are on the 16 side)  284.95  View       Amaircare Model 2500 HEPA Filter  Model 2500 HEPA Filter Powerful HEPA protection in a portable, attractive, compact unit. 650 sq. ft. of coverage - great for living rooms, bedrooms, family rooms! (MODEL 2500 White) Its compact size makes the Amaircare Model 2500 HEPA air cleaner an excellent choice for the master bedroom, family room or a medium sized office. The Amaircare Model 2500 puts powerful protection in the rooms and is designed for areas up to 650 square feet. To sleep better and wake up feeling more refreshed, or be more energized and productive at the office, the Model 2500 is just for you. Clean, healthy air makes a huge difference. Why Choose the Amaircare Model 2500 HEPA Air Filter System? - It’s three stage filtration process ensures removal of large and sub-micron particles, plus harmful vapors, gases and volatile organic compounds (V.O.C.’s). - Low Operating Costs - German-crafted motors are up to four times more efficient than competitive models. - Rolled Steel Construction - Rugged, contemporary styling offers greater durability and filter protection than ’’plastic’’ models. Metal cabinets are non-toxin emitting. - Inner Air Seals - Top and bottom seals to ensure complete filtration and prevent leakage and contamination of purified air. - Highly Efficient Motor/Fan Designed for Continuous Operation - Run tested for 50,000 hours. Thermally protected Class "B" insulated motor. - Optimized Air Flow - To maximize efficiency, cleaned air is vented downward to stir up settled particles, forcing them in an upward circulation pattern. The particles are drawn back into the intake areas for removal. - Easy-to-Change Filters - Easily removable tops for quick filter changes. - All Amaircare HEPA Filtration Systems are U.L. and C.S.A. Approved. Compatible Replacement Filters FK-2500 - annual filter kit (4 pre-filters, 2 V.O.C. filters) H-2500 - replacement HEPA filter VOC-2500 - optional VOC canister filter Amaircare Model 2500 Specifications Three Stage Filtration Process: Stage 1 - Large particles and V.O.C.’s: 3/16" thick activated carbon 150% impregnated, non-woven, fire retardant, polyester filter media. Removes dust, lint, carpet fiber, etc. (Filter life - 3 to 6 months) Stage 2 - Sub-micron particles: 50 square feet of HEPA - 3000 grade borosilicate filter media removes 99.97% of particles 0.3 microns and larger. Ends are sealed in food-grade plastisol. (Filter life - 2 to 5 years) Stage 3 - V.O.C.’s: 1/2" thick activated carbon 200% impregnated non-woven, polyester filter media. Removes dangerous household chemical gases from things like cleaners, paints, solvents, carpets, furniture and other materials containing chemical substances. (Filter life - 6 to 12 months) Also Available: OPTIONAL VOC CANISTER - For more efficient and longer lasting removal of chemical gases, smoke, household chemicals, pet odors and synthetic material odors. Specifications 5 Year Warranty! Available in Black or White Dimensions - 13.5" H x 16" W Weight - 15 pounds (Shipping weight - 19 lbs.) 24 gauge cold rolled steel - Powder coated baked enamel finish Variable speed operation - 50 to 175 cfm air flow Power Consumption - 41 to 84 watts (120V, 60Hz) (230V, 50/60 Hz also available) Coverage area - 300 to 650 sq. ft. (Based on 2-4 air change-overs per hour.)  339.00  View       Amaircare Model 3000 HEPA Filter  Model 3000 HEPA Filter Commercial quality HEPA filter - great for large rooms or offices. Casters allow for easy manoeuvrability. Covers up to 850 sq. ft. High-tech computer chip manufacturers use HEPA (High Efficiency Particulate Air) filters to remove 99.97% of airborne particles in their "clean rooms". Hospitals and health care facilities use it to safeguard patients and staff. Only HEPA filters can remove most or almost all microscopic particles down to .3 microns, about 1/25,000 of an inch! The Amaircare Model 3000 features 100 square feet of HEPA surface area to effectively remove dust, pollen, smoke, bacteria, attached viruses, animal dander, mold spores and more! Ideal for large rooms in your home or office. Available in black or white. Why Choose the Amaircare Model 3000 HEPA Air Filter System? - It’s three stage filtration process ensures removal of large and sub-micron particles, plus harmful vapors, gases and volatile organic compounds (V.O.C.’s). - Low Operating Costs - German-crafted motors are up to four times more efficient than competitive models. - Rolled Steel Construction - Rugged, contemporary styling offers greater durability and filter protection than ’’plastic’’ models. Metal cabinets are non-toxin emitting. - Inner Air Seals - Top and bottom seals to ensure complete filtration and prevent leakage and contamination of purified air. - Highly Efficient Motor/Fan Designed for Continuous Operation - Run tested for 50,000 hours. Thermally protected Class "B" insulated motor. - Optimized Air Flow - To maximize efficiency, cleaned air is vented downward to stir up settled particles, forcing them in an upward circulation pattern. The particles are drawn back into the intake areas for removal. - Easy-to-Change Filters - Easily removable tops for quick filter changes. - All Amaircare HEPA Filtration Systems are U.L. and C.S.A. Approved. Compatible Replacement Filters FK-3400 - annual filter kit (4 pre-filters, 2 VOC filters) H-3400 - replacement HEPA filter VOC-3400 - optional VOC canister filter Amaircare Model 3000 Specifications Three Stages of Filtration Stage 1 - Large particles and V.O.C.’s: 3/16" thick activated carbon 150% impregnated, non-woven, fire retardant, polyester filter media. Removes dust, lint, carpet fiber, etc. (Filter life - 3 to 6 months) Stage 2 - Sub-micron particles: 100 sq. ft. of HEPA filter media; Fine borosilicate filter media removes 99.97% of particles 0.3 microns and larger. Ends are sealed in food-grade plastisol. (Filter life - 2 to 5 years) Stage 3 - V.O.C.’s: 1/2" thick activated carbon 200% impregnated non-woven, polyester inner blanket. Removes dangerous household chemical gases from things like cleaners, paints, solvents, carpets, furniture and other materials containing chemical substances. (Filter life - 6 to 12 months) Also Available: OPTIONAL VOC CANISTER - For more efficient and longer lasting removal of chemical gases, smoke, household chemicals, pet odors and synthetic material odors. Specifications 5 Year Warranty! Available in Black or White Dimensions - 23" H x 16" W Weight - 22 pounds (Shipping weight - 27 lbs.) 24 gauge cold rolled steel - Powder coated baked enamel finish Variable speed operation - 50 to 225 cfm air flow Power Consumption - 41 to 84 watts (120V, 60Hz) (230V, 50/60 Hz also available) Coverage area - 400 to 850 sq. ft. (Based on 2-4 air change-overs per hour.)  459.00  View       Roomaid HEPA Filtration System - Amaircare  Now available in black Roomaid is ideal for bedrooms, small offices and other areas where space may be limited. Three-Stage Filtration Stage 1: Prefilter Removes large dust particles. Stage 2: HEPA filter 99.97% efficient @ 0.3 microns. Removes dust, pollen, bacteria, animal dander, attached viruses, cigarette smoke, radon daughters and more. Stage 3: V.O.C. filter (Volatile Organic Compounds) Removes hazardous V.O.C.s that may off-gas from things made with chemicals such as cleaners, paints, carpets, and furniture. Up to 5 Year Filter Life HEPA filter lasts up to 5 years and needs no maintenance. Low Electrical Costs It would take 13 1/3 Roomaids to use the same amount of electricity as one regular 60 Watt light bulb. Reusable Prefilter Washable foam prefilter can be used over and over. Specifications Dimensions: 8.5" D 7.5”H Weight: 5 lbs. Air Flow: 20 and 40 CFM Power Consumption: 4.5 Watts HEPA Surface Area: 19 sq.ft. Classification • Portable HEPA 100% Sealed Air Cleaning Device • U.L. and C.S.A. approved Materials: 24 gauge cold rolled steel Finish: Powder coated baked enamel Color: Sandtext White Intake (Upper Section): Three-stage filter assembly Outflow (Lower Section): 330 degree outflow Motor/Fan • Designed for continuous operation • Run tested for 35,000 hours • Service: 12 Volts D.C. Control: 3-position, 2-speed switch Filter Life: V.O.C. filter: 6-12 months HEPA filter: 2-5 years Included Aaccessories • 120 Volt A.C. to 12 Volt D.C. adaptor with 7 foot cord • Spare washable prefilter 100 sqft 250 sqft 500 sqft 750 sqft 1000 sqft 1250 sqft 1500 sqft 1750 sqft 2000 sqft Roomaid 3 ACH 1.2 ACH .6 ACH .4 ACH .3 ACH .24 ACH .2 ACH .17 ACH .15 ACH Based on 8' ceilings Generally speaking, the more air changes per hour (ACH) you can provide, the more effective a HEPA filter can be. 1 ACH provides excellent air cleaning results (higher is recommended for people with sensitivities). Remember: More HEPA is better than less, but some HEPA is better than nothing at all.  147.50  View       EnviroSept Electronic Air Cleaner  EnviroSept Electronic Air Cleaner Polarization Technology makes the EnviroSept the Ultimate Dust Collector! It removes over 99% of all particles as small as .001 micron in size! (EC-3500) The EnviroSept Electronic Air Cleaner was tested by an independent laboratory and found to remove over 99% of all particles as small as .001 micron from the air that passes through it. The EnviroSept Electronic Air Cleaner is a highly efficient, electronic air filter which utilizes the concept of DIELECTRIC POLARIZATION to effectively remove sub-micron particles, down to .001 micron in size. By delivering a strong but harmless (7,000 volt) positive DC charge to a central grid (located inbetween 2 PolyWool collector pads inside the unit), each fiber in the 1/2" thick collection pads becomes "polarized". As a result, airborne particles are drawn towards the fiber pads in the same way polarized magnets are drawn together. Instead of merely filtering or "straining" out particles, the EnviroSept’s polarized collector pads attract and trap airborne contaminants, i.e. smoke, dust, etc. Polarization technology effectively removes mold spores, bacteria, smoke and carcinogenic particles that other filter systems will not easily stop. The attraction is both certain and powerful. With tens of thousands of charged fiber strands in each pad, the efficiency of the EnviroSept is superior to other filtering methods. Maintenance is simple and low cost with inexpensive collector pads that are replaced only as necessary. Compatible Replacement Filters ECF-500 - optional charcoal filter RP-120 - replacement collector pads (12 pack) Specifications 5 Year Limited Warranty! Color - Charcoal colored Dimensions - 22" H x 16" W x 9.5"D Weight - 20 lbs. Coverage Turns the air 3 times/hour in a 750 sq. ft. area. Turns the air 6 times/hour in a 300 sq. ft. area. Fan Speed - Three speed adjustable fan - 100 to 300 cfm Watts - Less than 70 watts power consumption Timer Mode - 1, 2, 4 & 8 hour settings with automatic shut-off. Manual and wireless remote control for it’s three speed fan and timer. May be wall mounted or conveniently located on any floor or table area. UL Listed May be tax deductible with doctors prescription.  378.95  View       IQAir HealthPro  Free Shipping on this Item!**USA 48 States only For Allergy Sufferers Recommended for all individuals that want top of the line filtration of airborne particles, dust and allergens, who currently don't need gaseous chemical and odor control, but want to be able to upgrade when necessary. Applications - Mold spore control - Pet dander control (cat, dog, bird, etc.) - House dust mite allergen control - Pollen control - General indoor particle control Upgradeable to include gaseous chemical and odor control. One of the world's most efficient HEPA air cleaners in its class. Incorporates H12/13 class certified HEPA filter, normally used in multi-million dollar cleanrooms. This certification under the world's most stringent HEPA filter test, European Norm EN 1822, is the basis for this air cleaners' ability to capture up to 100 times more particles than conventional HEPA cleaners. In fact, while other air cleaners are rated only for particles down to 0.3 microns, IQAir systems have been found to remove particles down to 0.01 microns with close to 99% efficiency. The IQAir HealthPro Plus comes complete with filters, user manual, handsigned Certificate of Performance, set of 4 casters, 6 foot power cord, user guide video (both VHS and DVD) and remote control with batteries. All systems come complete with filters, owners manual, set of 4 casters (except GCX series and Cleanroom H13), 6 foot power cord, and certificate of guaranteed performance. Specifications Other Information 1. User Control Panel (comes with remote control unit) 2. Carrying Handle 3. No-Draft Diffuser 4. Cleanroom-Grade Certified H12/13 HEPA Filter (HyperHEPA) 5. Advanced Gas and Odor Control Filter (V5-Cell) 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. High-Capacity Pre-Filter (PreMax) 10. Dual Floor Air Intake General Number of Selectable Fan Speeds 6 Air Delivery (with new filters installed) per Speed Freeflowing fan capacity: 700 cfm 1 - 45 cfm 2 - 75 cfm 3 - 115 cfm 4 - 145 cfm 5 - 180 cfm 6 - 260 cfm Maximum Coverage Area 1100 sq ft (based on maximum fan speed and an 8.5 ft ceiling) System Efficiency for Particles 99.97% or more at 0.3 microns 99% for smaller particles Power Requirements 115 VAC 50-60 Hz The entire electrical system is UL certified. Energy Consumption (Max) 1 - 85 W 2 - 120 W 3 - 150 W 4 - 170 W 5 - 205 W 6 - 215 W Dimensions H 28" W 15" D 16" Net Weight (including filters) 29 lbs Warranty Period 5 years on unit including fan motor, excluding filters Filters Filter Configuration 1 Pre-Filter (PreMax) 1 Cleanroom grade HEPA filter (HyperHEPA) PreMax Pre-Filter High-capacity mini-pleat design with solvent-free separators, 25 sq. ft. filter area, HEPA-type 55% rated (F8), patented expanded polystyrene (EPS), CFC-free construction HyperHEPA Filter Mini-pleat with solvent-free separators, 40 sq. ft. filter area, H12 rated up to 112 cfm, H13 rated up to 380 cfm, patented expanded polystyrene (EPS), CFC-free construction Average Filter Life PreMax Filter: 6-18 months HyperHEPA Filter: 2-4 years Housing Housing Material ABS(UV-stabilized), non-offgasing, high-impact resistant Color of Main Housing/Arms Light Gray/White Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree, 77 sq inch opening on top of unit Fan Fan Motor Backward curved centrifugal design, 700 cfm free flow capacity, 2745 rpm, 3rd generation low noise design (Red Label), maintenance-free steel ball bearings, UL/CSA registered Electronic Control Panel Control Panel Design 4 key touch pad, 32 character LCD display Key features Display of air delivery for each speed, display of remaining filter life, automatic timer Display Languages English, French, German, Italian, Spanish Remote control Supplied with unit (includes batteries) The IQAir HealthPro is part of the world's most advanced line of air cleaners available for homes and offices. The HealthPro uses superior HyperHEPA technology that is used in today's modern million-dollar cleanrooms and hospitals. As a result, this air cleaners removes more pollution particles, such as allergens and dust from the air than conventional air cleaners, including conventional HEPA air cleaners. The IQAir HealthPro can at any time be upgraded by the user to also control gaseous chemicals and odors with the HealthPro Plus upgrade kit. For control of particles and a wide range of gaseous chemicals and odors see our HealthPro Plus model. For specific control of gaseous compounds see our GC Series models. For hospitals, laboratories and clean manufacturing of particles, microbiological contaminants, bacteria, and viruses see our Cleanroom H13 model. Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  695.00  View       IQAir HealthPro Plus  Free Shipping on this Item!**USA 48 States only IQAir HealthPro Plus Top 7 Reasons Why Everyone Loves IQAir! HyperHEPA™ - The Most Powerful Air Filtration Available. Most air purifiers can only filter down to 0.3 microns in size – But 90% of all particles in the air are smaller than 0.3 microns! IQAir’s patented HyperHEPA™ filtration filters down to 0.003 microns with a guaranteed minimum efficiency of 99%. This means that HyperHEPA™ can remove up to 100 times more allergens than conventional air cleaners. 2. Rated #1 by Top Reviewers Since the HealthPro Plus was launched, it has received more #1 product reviews than any other air purifier on the market. 3. Chosen by the American Lung Association IQAir was selected by the American Lung Association as their exclusive partner for indoor air quality. Every IQAir product comes with educational materials to help you improve your indoor air. 4. Trusted by Hospitals Worldwide IQAir is the #1 air purifier used by hospitals worldwide. IQAir was recently selected by the Hong Kong Hospital Authority as the only room air cleaner powerful enough to be used in the fight against SARS. Now you can have the same medical grade air purifier for your home! 5. #1 for Allergies & Asthma IQAir is the only air cleaner clinically proven effective for allergic asthma. IQAir passed the most comprehensive double-blind, placebo controlled clinical trial. The HealthPro Plus is the top recommended air purifier by medical and healthcare professionals. 6. Advanced Gas & Odor Control Protect yourself from household chemicals. Common household products like cleaners and detergents can emit dangerous vapors. Some air purifiers filter particles, but not chemicals or gases. IQAir offers the best gas filtration technology to remove the widest range of airborne chemicals. 7. 100% Ozone-Free Technology All IQAir air purifiers are certified to produce absolutely no ozone. Ozone is a lung irritant that is emitted from ionic air cleaners. Even small amounts of ozone are undesirable for allergy and asthma sufferers. For more information on how the IQAir HealthPro Plus can protect you against SARS, click here to download the IQAir press release. Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  795.00  View       Auto Pure Car Air Purifier  Auto Pure Car Air Purifier [SA-1000] is discontinued - instead try the new Amaircare XR-100 Auto Air Filter The Auto Pure will help rid your car, truck, van, etc. of tobacco smoke/odors and environmental chemical residues. Leaves your auto smelling clean and fresh! (SA-1000) Turn on the AutoPure at night and let it work while you’’re asleep! The next morning, turn off the unit, open your car windows and your auto interior will smell cleaner and fresher than ever before! When it comes to portability, nothing beats the Auto Pure SA-1000 Car Air Purifier! This handy unit is ideal for cars, tractor cabs, taxi cabs, RV’s, boats, 18-wheelers, vans... you name it! How does it work? The Auto Pure plugs into your cars cigarette lighter and produces very small amounts of ozone - a powerful disinfectant and odor-eater - and leaves your car smelling clean and fresh inside! Turn the Auto Pure on at night and let it work while you’’re asleep! The next morning, turn off the unit, open your car windows and your auto interior will smell cleaner and fresher than ever! The Auto Pure draws very little current and can be left ON without fear of running down your car battery! Auto Pure SA-1000 Specifications "The Air We Breath Inside Our Cars" Transcript of NBC News Broadcast with Tom Brokaw, June 11, 1999 Specifications 1 Year Warranty! Dimensions - 2"H x 6.5"W x 4"D Weight - 12 oz. Attractive and Compact Virtually Silent Operation On/Off Switch with green ON light The Air We Breathe Inside Our Cars Transcript of NBC News Broadcast with Tom Brokaw, June 11, 1999 "...The startling new study finds the air we breathe inside our cars is much worse than what’s right outside the window. ’’ In some cases, we found that pollution was as high as 10 times more inside the car than it was outside.’’ That’s Jerry Martin from the California Air Resources Board, who said tests found it’s especially awful behind big diesel trucks or behind buses because up to half the pollution inside your car comes from the vehicle directly in front. And it’s even bad without trucks or buses... Why? Because once pollution is sucked inside a car, it tends to stay there in that confined space building up. Commuters probably get their biggest hit of air pollution every day when they drive to and from work. "For the study, researchers outfitted test cars with sensitive pollution measuring devices, and during commutes found high levels of diesel soot, carbon monoxide, and other unhealthy gases from exhaust. Surprisingly, in the test, closing windows didn’’t keep pollution out. Neither did closing air vents nor using air conditioning. It only helped filter out a little dust and soot. Otherwise pollution inside remained twice as bad. On average, what was outside, at the edge of the highway, was 3 to 10 times worse when measured away from highways. These levels of pollution can be dangerous because of many of the compounds that we measured are considered toxic air contaminants, which means they cause C or birth defects. The finding is consistent with what’s known about other indoor air. Inside houses studies find two to five times more pollution than outside. And air in planes can be hard on eyes and the sinuses because it’s thin and dry. "How can you avoid pollution in your car? Researchers say the only way is something that is not always possible; stay out of heavy traffic and away from trucks or buses. The study found pollution 30% to 50% lighter in less congested carpool lanes or during non-rush hours. Otherwise, with vacation season here and more traffic than ever, we’’re trapped and not much we can do about it. Robert Hager, NBC News, Washington." Auto Pure Car Air Purifier [SA-1000] is discontinued - instead try the new Amaircare XR-100 Auto Air Filter  78.95  View       Amaircare Model 10000 Whole House HEPA Filter System  Free Shipping Does Not Apply. Please call us for a shipping quote. 800 578 5939 Amaircare Model 10000 Whole House HEPA Filter System The Amaircare Model 10000 Tri-HEPA Filter System works in tandem with your central air handling system! Recommended for large residential and commercial applications 2000-4000 sq. ft. Easily incorporated into a central heating/air conditioning or air circulation system, and it also works in conjunction with heat recovery ventilators. It’s three stage filtration system effectively removes even the tiniest airborne particles such as dust, lint and pollen as well as gases from cleaners, carpets, solvents and other chemical containing substances. The Volatile Organic Compound canister cartridge is available, as an option for further protection . They're housed in durable metal cabinets and can easily be customized to fit any system. Cover panels are easily accessible and allow for quick changing of the replaceable filters. It is designed for independent operation, and can work with or without the total system for a continuous supply of clean air. Replacement Parts or Related Items: VOC-3400 - optional VOC canister filter FK-6810 - annual filter kit (6 pre-filters, 3 VOC filters) Model 10000 Specifications Get three times the filtering media in the Model 10000 Tri-HEPA Filter System! Stage 1 - Large particles and V.O.C.’s: 3/16" thick activated carbon 150% impregnated, non-woven, fire retardant, polyester filter media (x3). Removes dust, lint, carpet fiber, etc. (Filter life - 3 to 6 months) Stage 2 - Sub-micron particles: 125 sq. ft. of HEPA filter media (x3); Fine borosilicate filter media removes 99.97% of particles 0.3 microns and larger. Ends are sealed in food-grade plastisol. (Filter life - 2 to 5 years) Stage 3 - V.O.C.’s: 1/2" thick activated carbon 200% impregnated non-woven, polyester inner blanket (x3). Removes dangerous household chemical gases from things like cleaners, paints, solvents, carpets, furniture and other materials containing chemical substances. (Filter life - 6 to 12 months) Specifications 5 Year Warranty! Dimensions - 17.25" W x 28" L x 50" H Weight - 130 lbs. 18 gauge cold rolled steel - Gray powder coated baked enamel finish Motor/Fan - Thermally protected Class "B" insulated motor - Run tested for 50,000 hours Air Flow - 700-1000 CFM Power consumption - 600 Watts - 120 Volt, 60 Hz Hepa Surface Area - 375 Square Feet Intake and Outflow - 10" x 12" Duct Collar Free Shipping Does Not Apply. Please call us for a shipping quote. 800 578 5939  2899.00  View       Amaircare Model 6500 Whole House HEPA Filter System  Free Shipping Does Not Apply. Please call us for a shipping quote. 800 578 5939 Amaircare Model 6500 Whole House HEPA Filter System Amaircare Model 6500 Tri-HEPA Filter System works in conjunction with your central air handling system! For large residential and commercial applications 1200-2400 sq. ft. (MODEL 6500) Easily incorporated into a central heating/air conditioning or air circulation system. The powerful Model 6500 TRI-HEPA filter system also works in tandem with heat recovery ventilators. Has a three stage filtration system that effectively removes the smallest airborne particles such as dust, lint and pollen as well as gases from cleaners, carpets, solvents and other chemical containing substances. An optional Volatile Organic Compound canister cartridge is also available for even further protection. These effective units are housed in durable metal cabinets and can be easily customized to fit your specific needs. Replaceable filters can be quickly changed through the easy-access cover panels. Designed for independent operation, these units can work with or without the total system to provide a continuous supply of clean air. Replacement Parts or Related Items: FK-3400 - annual filter kit (4 pre-filters, 2 VOC filters) VOC-3400 - optional VOC canister filter FK-6810 - annual filter kit (6 pre-filters, 3 VOC filters) Model 6500 Specifications Three Stages Stage 1 - Large particles and V.O.C.’s: 3/16" thick activated carbon 150% impregnated, non-woven, fire retardant, polyester filter media. Removes dust, lint, carpet fiber, etc. (Filter life - 3 to 6 months) Stage 2 - Sub-micron particles: 125 sq. ft. of HEPA filter media; Fine borosilicate filter media removes 99.97% of particles 0.3 microns and larger. Ends are sealed in food-grade plastisol. (Filter life - 2 to 5 years) Stage 3 - V.O.C.’s: 1/2" thick activated carbon 200% impregnated non-woven, polyester inner blanket. Removes dangerous household chemical gases from things like cleaners, paints, solvents, carpets, furniture and other materials containing chemical substances. (Filter life - 6 to 12 months) Specifications 5 Year Warranty! Dimensions - 17" W x 28" L x 18.5" H 18 gauge cold rolled steel - White powder coated baked enamel finish Motor/Fan - Thermally protected Class "B" insulated motor - Run tested for 50,000 hours Weight - 58 lbs. (Shipping weight - 67 lbs.) Air Flow - 100-450 CFM Power consumption - 160 Watts - 120 Volt, 60 Hz Hepa Surface Area - 125 Square Feet Intake and Outflow - 8" duct fitting Free Shipping Does Not Apply. Please call us for a shipping quote. 800 578 5939  1172.00  View       Amaircare Model 8500 Whole House HEPA Filter System  Free Shipping Does Not Apply. Please call us for a shipping quote. 800 578 5939 Amaircare Model 8500 Whole House HEPA Filter System Amaircare Model 8500 Tri-HEPA Filter System works in tandem with your central air handling system! For large residential and commercial applications 1600-3200 sq. ft. (MODEL 8500) Model 8500 Amaircare Central Air Filtration System - for larger residential and commercial applications Can be easily incorporated into a central heating/air conditioning or air circulation system. A powerful whole house filter system, that also works in conjunction with heat recovery ventilators. A three stage filtration system that can effectively remove even the smallest airborne particles such as dust, lint and pollen as well as gases from cleaners, carpets, solvents and other chemical containing substances. An optional Volatile Organic Compound canister cartridge is available for even further protection . Units are housed in durable metal cabinets and can easily be customized to fit your present system. Easy-access cover panels allow you to quickly change the replaceable filters. Designed for independent operation. Units can also work with or without the total system to provide a continuous supply of clean air. Replacement Parts or Related Items: FK-3400 - annual filter kit (4 pre-filters, 2 VOC filters) VOC-3400 - optional VOC canister filter FK-6810 - annual filter kit (6 pre-filters, 3 VOC filters) Model 8500 Specifications Three Stages Stage 1 - Large particles and V.O.C.’s: 3/16" thick activated carbon 150% impregnated, non-woven, fire retardant, polyester filter media. Removes dust, lint, carpet fiber, etc. (Filter life - 3 to 6 months) Stage 2 - Sub-micron particles: 125 sq. ft. of HEPA filter media; Fine borosilicate filter media removes 99.97% of particles 0.3 microns and larger. Ends are sealed in food-grade plastisol. (Filter life - 2 to 5 years) Stage 3 - V.O.C.’s: 1/2" thick activated carbon 200% impregnated non-woven, polyester inner blanket. Removes dangerous household chemical gases from things like cleaners, paints, solvents, carpets, furniture and other materials containing chemical substances. (Filter life - 6 to 12 months) Specifications 5 Year Warranty! Dimensions - 17.25" W x 28" L x 50" H 18 gauge cold rolled steel - Gray powder coated baked enamel finish Motor/Fan - Thermally protected Class "B" insulated motor - Run tested for 50,000 hours Weight - 125 lbs. Air Flow - 600-850 CFM Power consumption - 120 Volt, 60 Hz Hepa Surface Area - 300 Square Feet Intake and Outflow - 10" x 12" Duct Collar Free Shipping Does Not Apply. Please call us for a shipping quote. 800 578 5939  2249.00  View       Interceptor 2000 Commercial Air Cleaning System  The industrial workhorse of our Commercial Air Cleaning Systems 2000 CFM ceiling mount HEPA air cleaning system. 1 unit recommended for every 2000 square feet (I-2000) Think you''ve got a tough indoor pollution problem? Meet the solution! This is the Interceptor 2000, the industrial workhorse of our Air Cleaner Systems. Capable of removing dust, smoke, oil mist, chemicals; you name it. This unit is a money-saver by allowing you to recycle your interior air, rather than exhaust your valuable conditioned air to the outside. Saves you money year-round! 1 unit recommended for every 1500 - 2000 sq. ft. (approximately) - 2000 C.F.M. - Blower - Direct drive centrifugal - 48" L x 24" W x 24" H - 16 gauge steel cabinet - Torsion Flex Motor with Auto Shut-off. - Shipping Weight - 125 lbs. - 115v, 10 Amp - Three Filter System: - 4" pleated pre-filter - Multi-pocket Bag Filter - HEPA Final Stage Filter - All systems carry a lifetime motor/blower warranty - All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.  1895.00  View       MiracleAir CM-12 Commercial Air Cleaning System  The CM-12 is a ceiling mount HEPA-type air cleaner with 22 pounds of adsorbent media blend (80% activated carbon, 20% potassium permanganate). Infinitely variable speed controller regulates airflow up to 850 CFM. The Miracle Air CM-12 unit comes with two (2) V.O.C. filter modules containing a total of 22 lbs. of adsorbent media blend - 80% activated carbon and 20% potassium permanganate. The CM-12 uses high efficiency disposable filters to remove pollen, dust, smoke and other airborne particles. The large twin odor/V.O.C. filter modules remove odors and vapor contaminants. The solid state, variable speed controller allows for easy adjustments to air flow. The speed controller can be installed on the wall for remote operation if desired. This surface-mounted, 95% efficient @ .3 micron HEPA-type filter unit is designed for easy installation on any ceiling surface. Effective 360 degree COANDA air flow gently and evenly distributes clean air and returns dirty air to the unit. COANDA air flow destratifies air and eliminates "stuffy" air pockets. Low maintenance and long filter life is achieved because of the large volume of media used in both the particulate and the odor/V.O.C. disposable filters. Unique internal sound baffle and special sound absorbing foam cabinet liner keep the Miracle Air CM-12 to a minimal 69dBA on the high speed setting. Replacement Parts or Related Items: CM-12VOC - Media replacement kit CM-1295 - 95% HEPA-type disposable filter CM-12PF - Mesh Prefilter Specifications 3 Year Limited Warranty! Dimensions - 39" L x 22-5/8" W x 13-1/4" H Weight - 124 pounds installed - 149 pounds shipping Primary Filter Collection Area - Total Media Area 100 sq. ft. Air Cleaning Efficiency - 95% DOP Sorbent Media - 22 pounds of Activated Granular Carbon (22 lbs. Adsorbent Media Blend - 80% activated carbon, 20% Potassium permanganate.) Airflow Capacity - 0 - 850 cfm - Variable Speed Electrical - 115 Vac, 6.5 Amps, 60 Hz Power - 475 watts Motor - 1/3 horse power, PSC with sealed ball bearings Sound Levels - 69 dBA High Speed @ 6'', 51 dBA Low Speed @ 6'' Remote Control Availability Cabinet - Heavy Duty Metal Cabinet with Durable Paint Finish - Autumn White CSA and UL certified to both U.S. and Canadian Standards for safety and performance  1949.00  View       Mark 10 Ceiling Mount  It is recommended that the Mark 10 Air Cleaner be installed in areas that have 9-10 foot ceiling heights. The Mark 10 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 1000 square feet. • 1000 C.F.M. • Ceiling or Wall Mount • 35-1/2" L x 25-1/2" W x 13" H • Woodgrain or White Finish • Shipping Weight - 100 lbs. • 4.2 amps, 120V, Two speed • 10 ft. power cord, 3 prong grounded plug • Three Filter System: HEPA, Charcoal, Pre-Filter • All systems carry a lifetime motor/blower warranty • All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.  1495.00  View       Mark 15 Ceiling Mount  Our extremely attractive, self-contained systems require very low maintenance (approximately 30 seconds per month). It is recommended that the Mark 15 Air Cleaner be installed in areas that have 10-12 foot ceiling heights. The Mark 15 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 1500 sq. ft. • 1500 C.F.M. • Ceiling or Wall Mount • 35-1/2" L x 25-1/2" W x 17-1/2" H • Woodgrain or White Finish • Shipping Weight - 125 lbs. • 6.2 amps, 120V, Two speed • 10 ft. power cord, 3 prong grounded plug • Three Filter System: HEPA, Charcoal, Pre-Filter • All systems carry a lifetime motor/blower warranty • All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.  1595.00  View       Mark 20 Ceiling Mount  Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. It is recommended that the Mark 20 Air Cleaner be installed in areas that have 12 foot ceiling heights or more. The Mark 20 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 2000 sq. ft. • 2000 C.F.M. • Ceiling or Wall Mount • 36" L x 25" W x 25" H • Woodgrain or White Finish • Shipping Weight - 167 lbs. • 9.0 amps, 120V, Two speed • 10 ft. power cord, 3 prong grounded plug • Three Filter System: HEPA, Charcoal, Pre-Filter • All systems carry a lifetime motor/blower warranty • All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.  1895.00  View       Everclear CM-11-ER  The 220 volt product is intended for use in countries other than the USA where 220 voltage is used The EverClear is the ultimate air cleaner for a restaurant, bingo hall, bar or other commercial application where indoor air pollution is a concern. The EverClear captures both particulate and gaseous contaminants while remaining hidden installed in a false ceiling. The EverClear removes odors, tobacco smoke, pollen, dust, vapors and many other irritants. -Abbreviated Specifications- for the EverClear, from our line of HEPA air cleaners - Perfect for a Restaurant (download PDF at bottom for full specifications) Dimensions: 46.675"L x 22.675"W x 19.675"D x 200lbs. Air Flow: Up to 1100 CFM Power Input: 115 Vac, 60 hz, 1.1 amps Motor: ½ hp PSC with sealed ball bearings Filters: Pre-filter:1" aluminum mesh. V.O.C. filter modules, with 10 disposable filters each. 44 lbs of Adsorbent Media is a combination of Activated Carbon and Permanganate Efficiency: 95% D.O.P. @ .3 microns BROCHURES: EverClear.PDF  2114.00  View       Everclear CM-11F deluxe  The solid state, variable speed controller allows for easy adjustments to air flow. The speed controller can be installed on the wall for remote operation if desired. The CM-11F uses high efficiency disposable filters to remove pollen, dust, smoke and other airborne particles. The large twin odor/V.O.C. filter modules remove odors and vapor contaminants. The attractive grille fits flush with the ceiling and is completely inconspicuous! The cabinet is hidden in the unused space above the ceiling. The solid state, variable speed controller allows for easy adjustments to air flow. The speed controller can be installed on the wall for remote operation if desired. Special mounting brackets simplify the installation and do not require any additional space above the cabinet height of 19-9/16". Effective 360 degree COANDA air flow gently and evenly distributes clean air and returns dirty air to the unit. COANDA air flow destratifies air and eliminates "stuffy" air pockets. Low maintenance and long filter life is achieved because of the large volume of media used in both the particulate and the odor/V.O.C. disposable filters. Unique internal sound baffle and special sound absorbing foam cabinet liner keep the Miracle Air CM-11 to a hushed 59dBA on the high speed setting.  2195.00  View       MiracleAir CM-12 deluxe  The Deluxe Miracle Air CM-12 unit comes with two (2) V.O.C. filter modules containing a total of 22 lbs. of adsorbent media blend - 80% activated carbon and 20% potassium permanganate. The CM-12 Deluxe uses high efficiency disposable filters to remove pollen, dust, smoke and other airborne particles. The large twin odor/V.O.C. filter modules remove odors and vapor contaminants. The solid state, variable speed controller allows for easy adjustments to air flow. The speed controller can be installed on the wall for remote operation if desired. This surface-mounted, 95% efficient @ .3 micron HEPA-type filter unit is designed for easy installation on any ceiling surface. Effective 360 degree COANDA air flow gently and evenly distributes clean air and returns dirty air to the unit. COANDA air flow destratifies air and eliminates "stuffy" air pockets. Low maintenance and long filter life is achieved because of the large volume of media used in both the particulate and the odor/V.O.C. disposable filters. Unique internal sound baffle and special sound absorbing foam cabinet liner keep the Miracle Air CM-12 to a minimal 69dBA on the high speed setting.  1949.00  View       MiracleAir CM-12 deluxe (208V-240V)  The Deluxe Miracle Air CM-12 unit comes with two (2) V.O.C. filter modules containing a total of 22 lbs. of adsorbent media blend - 80% activated carbon and 20% potassium permanganate. The CM-12 Deluxe uses high efficiency disposable filters to remove pollen, dust, smoke and other airborne particles. The large twin odor/V.O.C. filter modules remove odors and vapor contaminants. The solid state, variable speed controller allows for easy adjustments to air flow. The speed controller can be installed on the wall for remote operation if desired. This surface-mounted, 95% efficient @ .3 micron HEPA-type filter unit is designed for easy installation on any ceiling surface. Effective 360 degree COANDA air flow gently and evenly distributes clean air and returns dirty air to the unit. COANDA air flow destratifies air and eliminates "stuffy" air pockets. Low maintenance and long filter life is achieved because of the large volume of media used in both the particulate and the odor/V.O.C. disposable filters. Unique internal sound baffle and special sound absorbing foam cabinet liner keep the Miracle Air CM-12 to a minimal 69dBA on the high speed setting.  1949.00  View       Electronic Air Cleaner and Ionizer  Net Weight : 6lb Hunt down smoke, germs, pollen, etc. Create new oxygen Eliminate unpleasant odors Get rid of bacteria Dust collection  135.95  View       Remote Controlled Fan  Net Weight : 13lb 1hr, 2hr, 4hr, 8hr, timer setting Automatically shuts off when the time is up High, Medium, or low wind speed control Normal, Natural and Relaxing Soft wind to choose from Choose from Up, Down, Left, Right, and all direction Remote control included UL approved Voltage: 120 V / 60 Hz  59.95  View       IQAir Cleanroom H13  Free Shipping on this Item!**USA 48 States only For filtration of microorganisms and other particles. Specially designed for infection control units, TB isolation rooms, critical particle control, use in cleanrooms up to Class 100. Applications - Microbiological control in hospitals - Clean production areas - Clean research areas - Pharmaceutical laboratories All systems come complete with filters, owners manual, 6 foot power cord, and certificate of guaranteed performance. Optional casters sold separately. Special Commercial Features For all airborne infection control applications in critical health-care settings only the IQAir® Cleanroom H13 provides the necessary technology to provide advanced protection against infectious airborne microorganisms. Larger HyperHEPA filter The Cleanroom offers a larger HyperHEPA filter (ca. 4.1 m2, instead of 3.7 m2). Also the unit has a larger pre-filter (ca. 4.1 m2, instead of 2.3 m2), therefore more capacity and longer life. This feature is particularly useful when the systems are in 24-hour non-stop use. Higher efficiency HyperHEPA filter Features H13 class certified HEPA filter. Individually tested and certified HyperHEPA® replacement filters to ensure continued certified filtration efficiency. Anti-microbially treated HyperHEPA® HEPA filter is treated with antimicrobial agents that kill microorganisms, especially bacterium that cause diseases upon contact. Anti-microbially treated pre-filter filter Pre-filter is treated with antimicrobial agents that kill microorganisms, especially bacterium that cause diseases upon contact. Higher air flow rate The airflow rate is higher since there is no gas filtration in this device. A gas filter would reduce the air flow rate and add to filter replacement costs and it does not provide any infection control benefits. High air delivery rates are also important to achieve high air changes per hour (ACH) and when the system is used to create negative/positive pressure differences (e.g. for isolation purposes). Anti-Tampering Features 1. Cable Lock A special cable lock that avoids the system from becoming disconnected accidentally. 2. Arm Lock A Special arm lock that prevents tampering with the system by unauthorised useres. Cleanroom Series Products Filtration Efficiency: 99.997% at 0.3 µm Air Delivery: 270 cfm For filtration of microorganisms and other particles. Specially designed for infection control units, TB isolation rooms, critical particle control, use in cleanrooms up to Class 100. HEPA Filter replace every 1-2 years Pre-Filter replace every 6-18 months Specifications Other Information 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Cleanroom-Grade HyperHEPA Filter 5. Snap-Open Locking Arms 6. High-Performance Centrifugal Fan 7. Advanced Fan Control 8. Pre-Max Pre-Filter (Class F9) 9. Dual Floor Air Intake General Number of Selectable Fan Speeds 5 Air Delivery (with new filters installed) per Speed 1 - 45 cfm 2 - 70 cfm 3 - 90 cfm 4 - 155 cfm 5 - 270 cfm Maximum Coverage Area 1200 sq ft (based on maximum fan speed and an 8.5 ft ceiling) System Efficiency for Particles 99.99% or more at 0.3 microns 99.7% for smaller particles Power Requirements 115 VAC 50-60 Hz The entire electrical system is UL certified. Energy Consumption (Max) 195 W Standby Energy Consumption 2.5 W Power Cable Detachable 6 foot Dimensions H 32" W 15" D 16" Net Weight (including filters) 33 lbs Warranty Period 1 yr on unit including fan motor, excluding filters Filters Number of Filter Stages 2 (fine dust and micro dust filtration) Total Number of Replacement Filters 2 (pre-filter, HEPA Filter) Pre-Filter 32 sq ft mini-pleat fine dust filter HEPA Filter Efficiency 99.97% at .3 microns HEPA Filter Surface Area 44 sq ft. Filter Frame Material Expanded polystyrene (EPS), chlorofluorocarbon (CFC) - free Filter Life Pre-Filter 6-18 months HEPA up to 2 years (filter life is dependant on the operating environment) Housing Number of Housing Modules 6 Housing Material PC-ABS and ABS(UV-stabilized) Color of Main Housing/Arms Light Gray/White Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree opening on top of unit Fan Fan Type Centrifugal fan, backward curved, single inlet Bearings Maintenance-free steal ball bearings Speed Regulation Voltage reductions via capacitor switching Electronic Control Panel Control Panel Finish Polyester overlay panel Main Display Liquid crystal display, 16 character x 2 line Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs Display Languages English, French, German, Italian, Spanish Professional Control Airborne Particulates The IQAir® Cleanroom Series has been designed specifically for the removal of airborne particles. The systems feature the highest air delivery and longest filter life of any IQAir particle filter system. To allow for maximum air delivery the systems contain no gas phase filtration. The Cleanroom Series provides a choice of 2 models, each with a specific filter efficiency and air delivery profile. While healthcare facilities may require higher air delivery to achieve optimum control of microorganisms (e.g. in ICUs or TB isolation rooms), a cleanroom facility may need a filtration efficiency of 99.97% to meet strict manufacturing regulations or standards. Positive and Negative Pressure Environments Each IQAir® Cleanroom system can be used as a recirculation device or it can be combined with IQAir's ducting adapters InFlow W125 or OutFlow W125 to create positive and negative pressure environments. The creation of negative pressure helps to contain harmful particles, such as microorganisms, in a particular area (e.g. TB isolation). The creation of positive pressure helps to protect clean areas from contaminants entering from adjacent rooms (e.g. protective isolation of immuno-compromised patients, controlled environments for medical device manufacturing). Decentralised Airborne Infection Control in Health-Care Facilities Airborne pathogens in health-care environments pose a particular risk to immunocompromised patients who may inhale fungal spores, bacteria and viruses. Airborne microorganisms can not only complicate recovery from surgery, but can also lead to life-threatening infections,costing health-care services hundreds of millions every year. Hospital-acquired aspergillosis for example has been recognised increasingly as a cause of severe illness and high mortality in immunocompromised individuals, e.g. patients undergoing chemotherapy and/or organ or bone marrow transplants. In the light of the marked increase in nosocomial infections over recent years, many of which are caused by drug-resistant pathogens, the importance of using high-efficiency air filtration systems beyond the confines of so-called “critical areas” (such as operation theatres) has once again been emphasised. Both the World Health Organisation (WHO) and the Centers for Disease Control and Prevention (CDC), advise that, wherever possible, preventive infection control measures should be implemented to reduce the risk of nosocomial infections. [read full report] Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  1595.00  View       IQAir Inflow W125  Free Shipping on this Item!**USA 48 States only Enjoy controlled clean air ventilation An IQAir® filter system combined with an InFlow W125 can be installed to draw outdoor air into an indoor environment. In this setup, an IQAir serves as a ventilation system, bringing in oxygen-rich outdoor air and a filtration system, which removes undesirable outdoor pollutants such as pollen, mold spores, dust and exhaust soot. As a result, fresh and filtered outside air comes into the room. Create clean positive pressure areas An IQAir® filter system combined with an InFlow W125, which draws air into a room will in most cases allow the creation of a positive pressure. This positive pressure helps to clean the air in a room by constantly flushing out air pollutants and by preventing outside pollutants from entering the room. Application Examples: Protection of allergy sufferers from pollen exposure in their home Protection of patients from microbiological exposure (e.g. aspergillus) in a hospital Creation of clean research or manufacturing areas (controlled environments) Protection of plant control rooms from corrosive contaminants Creation of a clean zone within a home or office which helps to prevent outdoor pollution from nature, factories, traffic, agriculture to enter. Using an InFlow W125 with an IQAir system can improve indoor air quality by: diluting polluted air with clean air flushing out air pollutants reducing influx of new outside pollutants due to a build-up of positive pressure by increasing oxygen content in indoor air (when outdoor air is being drawn in) Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  545.00  View       IQAir OutFlow W125  Free Shipping on this Item!**USA 48 States only Application The OutFlow W125 kit allows filtered air from any IQAir® filtration device to be directed through a wall or window vent. The OutFlow W125 kit can be used to: create clean areas deliver filtered air into cleanrooms or to the outside create negative pressure areas create positive pressure areas Clean Area and Cleanroom Use The supply of filtered air into an environment helps reduce air pollution in that environment by dilution and the creation of positive pressure, which reduces the infiltration of polluted air from outside the environment. With the OutFlow W125 kit, the filtration device is positioned outside the clean area or cleanroom, saving valuable space and reducing noise exposure. It also eliminates the danger of housing leakage, making it suitable even for certified cleanrooms. Emission Control Legislation limits the emission of polluted air to the outdoors. The OutFlow W125 filters air before it is exhausted outdoors to help meet environmental emission standards. Isolation Areas Infection control (e.g. tuberculosis) in hospitals and similar facilities demands the creation of negative pressure environments to reduce the spread of airborne microorganisms. The OutFlow W125 permits operation of the filter unit from within the isolation area, eliminating the danger of housing leakage into the surrounding area. The OutFlow W125 kit easily modifies any IQAir filtration unit. Simply replace the top module of any standard IQAir filtration unit with the TopFlow adapter. All that is needed to install the ducting, wall tube and vent is a 5.2" opening in a wall or window. The OutFlow W125 kit also includes a damper and a protective mesh grille which prevents backdrafts and entry of coarse particles when the system is not in use. The large 5" diameter of the ducting ensures low air resistance. The aluminum duct may be freely flexed to allow control over the desired vent location. It is expandable in length from 10" in its original compressed state to 39" when fully extended. Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  495.00  View       IQAir HG FlexVac  Free Shipping on this Item!**USA 48 States only Control of VOCs and microbiological contaminants and odors specific to dental offices and facilities. Applications - Drill aerosol control - Microorganism control - Mercury vapor - Disinfectant control IQAir Dental HG FlexVac Post-Filter Sleeves Set of 4 - replace every 1-3 yrs Media Cartridges Set of 4 - replace every 1-3 yrs Pre-Filter replace every 6-18 months All systems come complete with filters, owners manual, set of 4 casters (except GCX series and Cleanroom H13), 6 foot power cord, and certificate of guaranteed performance. Specifications Other Information 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Particle Post-Filter Sleeves 5. Gas and Odor Filter Cartridges 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. Pre-Max Pre-Filter (Class H11) 10. Dual Floor Air Intake General Number of Selectable Fan Speeds 6 Air Delivery (with new filters installed) per Speed 1 - 35 cfm 2 - 60 cfm 3 - 95 cfm 4 - 125 cfm 5 - 150 cfm 6 - 250 cfm Maximum Coverage Area 900 sq ft System Efficiency for Particles 99% or more for .3 microns 95% for smaller particles Power Requirements 115 VAC 50-60 Hz. The entire electrical system is UL certified. Energy Consumption (Max) 215 W Dimensions H 28" W 15" D 16" Net Weight (including filters) 51 lbs Warranty Period 1 yr on unit including fan motor, excluding filters Filters Filter Configuration 1 Pre-Filter 4 Hg Cartridges 4 Post Filter Sleeves Pre-Filter DOP 97% high accumulation media 25 sq ft area Gas Phase Filter Approx. 11 lbs of impregnated activated carbon Post Filter Sleeves 98% DOP (.3 microns) electrostatic media Average Filter Life Pre-Filter 6-18 months, Gas phase filter: 1-3 yrs, Post filter 1-3 yrs Housing Number of Housing Modules 6 Housing Material PC-ABS (fire resistant) and ABS(UV-stabilized) non-offgasing, high impact resistant Color of Main Housing/Arms Light Gray/White Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree opening on top of unit Fan Fan Type Centrifugal fan, backward curved, single inlet, UL/CSA registered Bearings Maintenance-free steal ball bearings Speed Regulation Voltage reductions via capacitor switching Electronic Control Panel Control Panel Finish Polyester overlay panel Main Display Liquid crystal display, 16 character x 2 line Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs Display Languages English, French, German, Italian, Spanish Customized Pollution Control for Dental Offices The IQAir® Dental Hg FlexVac is a mobile air cleaning system with a flexible suction arm. It is designed to capture drill aerosols, abrasion powder and mercury vapors during dental procedures. The pollutants are captured by a flexible suction duct before they can spread to other areas in the room. The IQAir Dental Series units are based on the IQAir GC design and contain filter cartridges, which optimize them for the pollutants found in dental offices. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses). The neutral white and light grey design integrate perfectly in all dental offices. Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  1274.95  View       AirFree Baby Air Purifier  Healthy air for your baby! It is of high importance to keep the air around your baby free of any pollutants. Clean, fresh air allows for easier breathing, helping to cope with illnesses; cleansing the air of bacteria, germs and any other lingering cotangents. This air purifier is the best chosen for a healthy nursery, as it works very well and is very quite, to let your baby sleep. Studies have show that children exposed to dust mites at early ages stand a better chance to develop asthma. "Asthma is the third major cause of hospitalization in children under 15. Underestimating the severity of an acute attack poses the greatest threat to children with asthma. A study of children showed that nearly 40% of them were unaware of asthmatic symptoms when they occurred. Asthma is especially serious in children, especially those younger than five, because their air tubes are very narrow. The immature air tubes have less reserve for air exchange and don't respond as well as adults to bronchodilators. The hospitalization and fatality rates among children and young adults with asthma are on the rise." This air purifier reduces the risk of mold, flu and cold germs spreading through air conditioning systems, and protects the elderly, weak and asthma sufferers from further future contamination. Specs: Air purification capacity in rooms up to 250 sq. ft., or 2000 cu. ft. (24 sq. meters) Air Speed 6.7"/second (17 cm/s) Ceramic Core Internal Temperature approx. 400°F - 600°F (200 - 260°C) Maximum external temperature 144°F (warm to the touch but will not burn) (61°C) No fan Power consumption (voltage/watts) 46 watts, 110v (less than a 50 Watt light bulb) Noise level totally silent Dimensions 8"w x 10"h (20X25 cm) Shipping weight (lbs) 4 lbs (1.8 kg) Certifications ISO, CE, UL Maintenance Requires no maintenance Warranty 2 year 99.99% Air Sterilization Capacity Drastically reduces airborne viruses, bacteria, molds,dust mites & more Provides healthy environment to homes, offices and commercial areas An alternative to HEPA filters, Ionic or Ozone purifiers Reduces organic smells Delivers pure air continuously No Ozone, Ions or Chemicals Noiseless No filters to replace Compact Design 8" x 10" (4 lbs.) A home air purifier can be an effective, non-medicinal way to control your baby's allergies and asthma. Keep an air purifier in the baby's nursery to ensure the air your babe breathes is healthy.  199.00  View     BioGuard 1000  These tiny portable air purifiers helps kill odors, chemicals and airborne germs before you breathe them! For allergy sufferers everywhere, now there’s a solution to air pollution. The BioGuard1000™ creates a protective shield around your head by emitting trillions of air-cleansing ions that form your first line of defense against dangerous airborne agents. Dramatically improves the quality of the air you breathe. Substantially reduces the following harmful particles from your breathing zone: Bacteria Fungi Chemicals Allergens Smoke Dust Mold Spored Viruses Soot Pollen Perfumes Dog & Cat Dander Features: Recommended on National TV to over 30 million viewers! Years of Validation studies by physicians and PH.D. research scientists at leading universities and research institutes. Electro-Plated Gold Grid. Solid Platinum Emitter. Battery life up to 50 hours. Light Weighs: only 1.5 ounces. Air Flow of 100 feet/minute Ion Flux density greater than 1 million ions per cubic centimeter at 8” Neck Cord & Lithium battery Battery included. One year parts & labaor warranty The BioGuard 1000 is a revolutionary, small, battery powered personal bodyguard. It is worn around the neck or it can clip onto a shirt pocket. It is a bio-risk-reduction product designed to significantly reduce exposure to harmful airborne agents encountered in 21st Century everyday life. Today each of us is at war with an increasingly hostile environment. We are faced with a high level of risk to our general health and to our life, as a result of being continually exposed to a wide variety of harmful airborne agents that can make us sick and even kill us. The air we breathe is becoming increasingly dangerous to our well-being. We are now faced with a new threat, bio-terrorism. The BioGuard 1000 can significanly reduce the presence of most toxic airborn sized particles from .3 to 3 microns in size which can represent and include most respirable airborne particles such as: • Bacteria • Mold Spore • Chemicals • Viruses • Smoke • Perfumes • Fungi • Dust • Pollen • Soot • Allergens • Cat Dander The Technology The BioGuard 1000 technology is the result of ten years of R&D and innovation. It has earned four U.S. patents. Our years of authoritative research supports the claims of significantly reducing particle concentration in the human breathing zone for all particles in the size range .3 to 3 microns. This includes inert as well as biological particles of bacteria and virus that are of this size range. This tiny portable air purifier operates continuously to reduce and kill toxic airborne agents. By creating an army of trillions of air cleansing ions, it also causes aerosol particles to clump and precipitate out of the air in the breathing zone, giving double protection.  147.95  View       Magic Clean HEPA Air Cleaner  Net Weight : 9 lb Helps reduce common air borne allergens: Pollen, Dust Mite, Tobacco Smoke, Cat Dander, Mold Spores, etc as large as 180 square feet Manual 2 speed controls with power light Convenient filter access for easy replacement Convenient carrying handle Manual filter change calendar Replacement Filter: AC-3000F  119.95  View       Amaircare Chem Bio Airwash System  Designed to handle the new Chemical and Biological dangers. The Chembio Airwash downdraft HEPA sorting station for use in secured rooms in conjunction with proper masks and gloves for maximum protection from possible threats. The ChemBio Airwash is a HEPA filtration system that creates a down-flow of air on a sorting surface, that leads directly into two HEPA filters. There are possible particulate hazards such as Chemicals or Bio-Matter are forced into the HEPA filter. Each filter contains 100 ft of HEPA paper for maximum airflow. The clean air out can be ducted to create a negative pressure in the room (so any contaminates that do end up in the room, stay there to be drawn into the ChemBio Airwash). For maximum protection, items should be directed to a sealed room with a ChemBio Airwash system in use. Latex gloves and appropriate masking should be used by the operator. Any items would be inspected and/or opened directly on the ChemBio Airwash’s downdraft HEPA sorting surface. Using Amaircare®’s Dual-HEPA design, they each employ two high-efficiency motor/fans and up to 200 sq. ft. of HEPA for 99.97% removal efficiency of particulates 0.3 microns and larger. A variety of available V.O.C. (Volatile Organic Compound) filters for removal of chemicals gases are also employed. Easy-to-Change Filters Easily removable cover panels, and simple filter fastening system. Durable Metal Cabinets Greater protection for filters and internal components. Highly-Efficient Motor/Fan Uses a low electrical consumption when it is continuously run over a long period of time. Highly Efficient Air Cleaning The AirWash is 99.9% efficient on air borne particles over 3 microns (1/25,000 of an inch). No Harmful Byproducts Amaircare®™ Air Filtration Systems does not produce toxins. Three-Stage Filtration: Stage 1: Activated Carbon Pre-filter Removes large particulates and odors. Stage 2: HEPA filter 99.97% efficient @ 0.3 microns. Removes dust, pollen, bacteria, animal dander, attached viruses, cigarette smoke, radon daughters and more. Stage 3: V.O.C. filter Removes hazardous chemicals that may off-gas from cleaners, paints, solvents, carpets, furniture and other items containing synthetic materials. The Amaircare® ChemBio Airwash system is designed to be used in any situation where biochemically suspicious material is handled. How to use the ChemBio Airwash: Turn unit on High. Allow motor to reach maximum speed, maximum air intake will result at the DOWNDRAFT HEPA SORTING SURFACE. Place the MATERIAL to be opened or inspected on the DOWNDRAFT HEPA SORTING SURFACE. Proceed with opening or inspecting MATERIAL. When completed - Turn the unit to low and it will continue to clean the surrounding air. If any unknown, foreign, or suspicious substance has been detected, follow your COMPANY PROCEDURES, secure the sorting area, and CALL AUTHORITIES IMMEDIATELY Specifications: CLASSIFICATION Central HEPA (High Efficiency Particulate Air) 100% Sealed Air Cleaning Device U.L. and C.S.A. approved DIMENSIONS: 17" W 28”L 41”H WEIGHT: 96 lbs. AIR FLOW (C.F.M.): 200-1200 HEPA SURFACE AREA: 200 sq. ft. POWER CONSUMPTION: 320 Watts INTAKE: 28"x17" screen fitted to a 12" duct opening OUTFLOW: Two - 8" duct collars COLOUR: Safety Yellow MATERIALS: 18 gauge cold rolled steel FINISH: Powder coated baked enamel CONTROL: Variable speed MOTOR/FAN Thermally protected Class “B” insulated motor Designed for continuous operation. Run tested for 50,000 hours Service: 120 Volt, 60 Hz or 230 Volt, 50/60 Hz FILTER LIFE Stage 1: Foam Filter: Reusable Stage 2: HEPA. Filter: 2-5 years Stage 3: Carbon Filter  1329.95  View       SpringAir Classics CS-1 Air Purifier  The CS-1 is for areas up to 2500 sq. ft, while and CS-2 is for areas up to 3500 sq. ft and both are for normal indoor spaces such as home and offices. The CS-4 is for up to 5000 sq. ft and is for bars, restaurants and heavily used areas. The SpringAir Purifier The SpringAir is not a filter. Instead it re-creates the same process that Mother Nature uses to keep the air fresh and clean. It generates the negative ions that nature uses to clear the air of dust and other particles. It also produces activated oxygen to remove odors without the use of fragrances. It helps to break down mold, mildew and other pollutants at their source. Refresh the Air Like the water we drink and the food we eat, the air we breathe has a great impact on our quality of life. The SpringAir can reduce sources of discomfort which contribute to allergies, hay fever and other types of airborne irritation. Utilizing both activated oxygen and negative ions, your SpringAir can significantly reduce: • Odors from Pets, Cooking, Tobacco, Etc. • Mold, Mildew and Pollen • Chemical Gases and Paint Fumes • Bacteria, Viruses and Fungi • Dust and Smoke Particles Control the Cleaning The control for negative ion generation is separate from the activated oxygen control. Negative ions can be created around the clock to keep down dust andparticulate. Activated oxygen is normally kept at modest levels in occupied spaces. To remove major odors, the unit may be adjusted to a higher level for a period of time. Some use a timer to completely deodorize the home or office while away. Unused O3 reverts back to O2 in about an hour. SpringAir units are totally portable. Just plug in and start to enjoy clean, mountain-fresh air for only pennies a day! Comes in 3 colors to go with any Decor.  345.00  View       SpringAir Classics CS-2 Air Purifier  The CS-1 is for areas up to 2500 sq. ft, while and CS-2 is for areas up to 3500 sq. ft and both are for normal indoor spaces such as home and offices. The CS-4 is for up to 5000 sq. ft and is for bars, restaurants and heavily used areas. The SpringAir Purifier The SpringAir is not a filter. Instead it re-creates the same process that Mother Nature uses to keep the air fresh and clean. It generates the negative ions that nature uses to clear the air of dust and other particles. It also produces activated oxygen to remove odors without the use of fragrances. It helps to break down mold, mildew and other pollutants at their source. Refresh the Air Like the water we drink and the food we eat, the air we breathe has a great impact on our quality of life. The SpringAir can reduce sources of discomfort which contribute to allergies, hay fever and other types of airborne irritation. Utilizing both activated oxygen and negative ions, your SpringAir can significantly reduce: • Odors from Pets, Cooking, Tobacco, Etc. • Mold, Mildew and Pollen • Chemical Gases and Paint Fumes • Bacteria, Viruses and Fungi • Dust and Smoke Particles Control the Cleaning The control for negative ion generation is separate from the activated oxygen control. Negative ions can be created around the clock to keep down dust andparticulate. Activated oxygen is normally kept at modest levels in occupied spaces. To remove major odors, the unit may be adjusted to a higher level for a period of time. Some use a timer to completely deodorize the home or office while away. Unused O3 reverts back to O2 in about an hour. SpringAir units are totally portable. Just plug in and start to enjoy clean, mountain-fresh air for only pennies a day! Comes in 3 colors to go with any Decor.  435.00  View       SpringAir Classics CS-4 Air Purifier  The CS-1 is for areas up to 2500 sq. ft, while and CS-2 is for areas up to 3500 sq. ft and both are for normal indoor spaces such as home and offices. The CS-4 is for up to 5000 sq. ft and is for bars, restaurants and heavily used areas. The SpringAir Purifier The SpringAir is not a filter. Instead it re-creates the same process that Mother Nature uses to keep the air fresh and clean. It generates the negative ions that nature uses to clear the air of dust and other particles. It also produces activated oxygen to remove odors without the use of fragrances. It helps to break down mold, mildew and other pollutants at their source. Refresh the Air Like the water we drink and the food we eat, the air we breathe has a great impact on our quality of life. The SpringAir can reduce sources of discomfort which contribute to allergies, hay fever and other types of airborne irritation. Utilizing both activated oxygen and negative ions, your SpringAir can significantly reduce: Odors from Pets, Cooking, Tobacco, Etc. Mold, Mildew and Pollen Chemical Gases and Paint Fumes Bacteria, Viruses and Fungi Dust and Smoke Particles Control the Cleaning The control for negative ion generation is separate from the activated oxygen control. Negative ions can be created around the clock to keep down dust andparticulate. Activated oxygen is normally kept at modest levels in occupied spaces. To remove major odors, the unit may be adjusted to a higher level for a period of time. Some use a timer to completely deodorize the home or office while away. Unused O3 reverts back to O2 in about an hour. SpringAir units are totally portable. Just plug in and start to enjoy clean, mountain-fresh air for only pennies a day! Comes in 3 colors to go with any Decor.  537.95  View       Amaircare Model 4000V Whole House System  ideal for someone who... Has a home or office up to 800 sq. ft. and needs clean air circulated throughout entire the home, apartment, condo, summer home, office or commercial building. Wants to prevent chemical, dust-mite, and pollen allergies with the help of powerful HEPA central air filtration that doesn’t produce ozone gas Wants to remove VOCs (Volatile Organic Compounds) including radon daughters, chemical gases that comes from household chemicals and synthetic materials Needs a filtration system that is flexible enough for ducted or non-ducted installation Wants a HEPA air filtration system that can run independently of furnace operation Wants to help prevent the condition known as Sick Building Syndrome, HEPA air purification can reduce the effect of the build up of indoor air pollutants Wants a way to clean outdoor air brought in by the H.R.V. (Heat Recovery Ventilator) or E.R.V. (Emergency Recovery Ventilator) Specifications: CLASSIFICATION Central HEPA (High Efficiency Particulate Air) 100% Sealed Air Cleaning Device U.L. and C.S.A. approved DIMENSIONS: 17" W 28”L 21”H WEIGHT: 56 lbs. AIR FLOW (C.F.M.): 75-300 HEPA SURFACE AREA: 100 sq. ft. POWER CONSUMPTION: 120 Watts INTAKE: 6” duct fitting OUTFLOW: 6” duct fitting COLOUR: Gray MATERIALS: 18 gauge cold rolled steel FINISH: Powder coated baked enamel MOTOR/FAN Thermally protected Class “B” insulated motor Designed for continuous operation. Run tested for 50,000 hours} Service: 120 Volt, 60 Hz or 230 Volt, 50/60 Hz U.L. and C.S.A. approved CONTROL: Variable speed FILTER LIFE Stage 1: Carbon Filter: 3-6 months Stage 2: HEPA Filter: 2-5 years Stage 3: Carbon Filter: 6-12 months  629.00  View       IQAir GCX VOC  Free Shipping on this Item!**USA 48 States only Volatile Organic Compounds Advanced air cleaning device for volatile organic compounds, odors, and particulates. Applications - Chemical control - Control of the following: Benzene, Butane, Carbon tetrachloride, Chlorine, Chloroform, Chloropicrin, Cyclohexane, 1.1 Dichloroethane, Ethylene oxide, Freon 11, Indole, Methyl chloride, Methyl chloroform, Methylene chloride, Nitrobenzene, Phosgene, Pyridine, Sulfuric acid, Toluene, Xylene Particle Post-Filter Sleeves Set of 4 - replace every 2-3 yrs Media Cartridges Set of 4 - replace every 2-3 yrs Pre-Filter replace every 6-18 months All systems come complete with filters, owners manual, set of 4 casters (except GCX series and Cleanroom H13), 6 foot power cord, and certificate of guaranteed performance. Specifications Other Information 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Particle Post-Filter Sleeves 5. Gas an Odor Filter Cartridges 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. Pre-Max Pre-Filter (Class H11L) 10. Dual Floor Air Intake General Number of Selectable Fan Speeds 5 Air Delivery (with new filters installed) per Speed 1 - 40 cfm 2 - 60 cfm 3 - 90 cfm 4 - 140 cfm 5 - 270 cfm Maximum Coverage Area 1200 sq ft (based on maximum fan speed and an 8.5 ft ceiling) System Efficiency for Particles 99% or more at 0.3 microns 95 for smaller particles Power Requirements 115 VAC 50-60 Hz The entire electrical system is UL certified. Energy Consumption (Max) 195 W Standby Energy Consumption 2.5 W Power Cable Grounded Detachable 6 foot Dimensions H 40" W 15" D 16" Net Weight (including filters) 80 lbs Warranty Period 1 yr on unit including fan motor, excluding filters Casters Optional casters (Mobility 56) sold separately. Filters Number of Filter Stages 3 (particle pre-filtration, gas absorption and particle post-filtration) Total Number of Replacement Filters 9 (1 HEPA-type pre-filter, 4 gas cartridges and 4 post-filter sleeves) Particulate Pre-Filter Mini-pleat HEPA filter with efficiency of 98% at .3 microns Amount of Gas Phase Filter Media Between 18 and 25 lbs. depending on media Cartridge Design Galvanized, reusable metal cylinders Particulate Post-Filter Four electrostatically charged fiber media sleeves Filter Life Pre-Filter 6-18 months Sleeves 2-3 years Cartridges up to 3 years (filter life is dependant on the operating environment) Housing Number of Housing Modules 10 Housing Material PS-ABS and ABS(UV-stabilized) Color of Main Housing/Arms Light Gray/Blue Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree opening on top of unit Fan Fan Type Centrifugal fan, backward curved, single inlet Bearings Maintenance-free steal ball bearings Speed Regulation Voltage reductions via capacitor switching Electronic Control Panel Control Panel Finish Polyester overlay panel Main Display Liquid crystal display, 16 character x 2 line Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs Display Languages English, French, German, Italian, Spanish Customized Gas and Odor Control The GCX Series is IQAir’s highest capacity air cleaner range with customized filters for specific gaseous contaminants and odors. Just like a professional gas mask, IQAir maximizes filter efficiency for different gases and odors by offering the right filter cartridge. And while gas and odor control are a particular strength of these systems, the GCX Series also offers excellent filtration efficiency for particles. The main difference between the GCX and its smaller sibling the GC is, that the GCX contains 25 lbs. of gas phase media while the GC Series contains 12 lbs. In addition the GCX Series features larger pre- and post-particle filters. As a result the maximum air delivery of the GCX is about 20% higher than that of the GC. Gas Cartridge Technology Each IQAir® GCX model contains four reusable filter cartridges with up to 25 lbs. of gas phase media. A wide range of differently formulated cartridges are available to maximize the filtration efficiency for different types of gaseous contaminants. Since IQAir® gas filter cartridges are reusable, replacing them is not only economical, but also environmentally friendly. High-Efficiency Particulate Filtration The particulate filtration GCX units complements the gaseous filtration process by removing over 97% of particles before they can reach the gas phase media. This increases the efficiency and life of the media by preventing its pores from clogging. The GXC units' overall filtration efficiency for particles is 97% at .3 microns. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses) Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  1495.00  View       IQAir GCX AM  Free Shipping on this Item!**USA 48 States only Ammonia Control Advanced air cleaning device for control of ammonia, amines, ammonia-based odors and particulates. Applications Chemical Control of ammonia based compounds. Particle Post-Filter Sleeves Set of 4 - replace every 2-3 yrs Media Cartridges Set of 4 - replace every 2-3 yrs Pre-Filter replace every 6-18 months All systems come complete with filters, owners manual, set of 4 casters (except GCX series and Cleanroom H13), 6 foot power cord, and certificate of guaranteed performance. Specifications Other Information 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Particle Post-Filter Sleeves 5. Gas an Odor Filter Cartridges 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. Pre-Max Pre-Filter (Class H11L) 10. Dual Floor Air Intake General Number of Selectable Fan Speeds 5 Air Delivery (with new filters installed) per Speed 1 - 40 cfm 2 - 60 cfm 3 - 90 cfm 4 - 140 cfm 5 - 270 cfm Maximum Coverage Area 1200 sq ft (based on maximum fan speed and an 8.5 ft ceiling) System Efficiency for Particles 99% or more at 0.3 microns 95 for smaller particles Power Requirements 115 VAC 50-60 Hz The entire electrical system is UL certified. Energy Consumption (Max) 195 W Standby Energy Consumption 2.5 W Power Cable Detachable 6 foot Dimensions H 40" W 15" D 16" Net Weight (including filters) 80 lbs Warranty Period 1 yr on unit including fan motor, excluding filters Casters Optional casters (Mobility 56) sold separately. Filters Number of Filter Stages 3 (particle pre-filtration, gas absorption and particle post-filtration) Total Number of Replacement Filters 9 (1 HEPA-type pre-filter, 4 gas cartridges and 4 post-filter sleeves) Particulate Pre-Filter Mini-pleat HEPA filter with efficiency of 98% at .3 microns Amount of Gas Phase Filter Media Between 18 and 25 lbs. depending on media Cartridge Design Galvanized, reusable metal cylinders Particulate Post-Filter Four electrostatically charged fiber media sleeves Filter Life Pre-Filter 6-18 months Sleeves 2-3 years Cartridges up to 3 years (filter life is dependant on the operating environment) Housing Number of Housing Modules 10 Housing Material PS-ABS and ABS(UV-stabilized) Color of Main Housing/Arms Light Gray/Blue Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree opening on top of unit Fan Fan Type Centrifugal fan, backward curved, single inlet Bearings Maintenance-free steal ball bearings Speed Regulation Voltage reductions via capacitor switching Electronic Control Panel Control Panel Finish Polyester overlay panel Main Display Liquid crystal display, 16 character x 2 line Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs Display Languages English, French, German, Italian, Spanish Customized Gas and Odor Control The GCX Series is IQAir’s highest capacity air cleaner range with customized filters for specific gaseous contaminants and odors. Just like a professional gas mask, IQAir maximizes filter efficiency for different gases and odors by offering the right filter cartridge. And while gas and odor control are a particular strength of these systems, the GCX Series also offers excellent filtration efficiency for particles. The main difference between the GCX and its smaller sibling the GC is, that the GCX contains 25 lbs. of gas phase media while the GC Series contains 12 lbs. In addition the GCX Series features larger pre- and post-particle filters. As a result the maximum air delivery of the GCX is about 20% higher than that of the GC. Gas Cartridge Technology Each IQAir® GCX model contains four reusable filter cartridges with up to 25 lbs. of gas phase media. A wide range of differently formulated cartridges are available to maximize the filtration efficiency for different types of gaseous contaminants. Since IQAir® gas filter cartridges are reusable, replacing them is not only economical, but also environmentally friendly. High-Efficiency Particulate Filtration The particulate filtration GCX units complements the gaseous filtration process by removing over 97% of particles before they can reach the gas phase media. This increases the efficiency and life of the media by preventing its pores from clogging. The GXC units' overall filtration efficiency for particles is 97% at .3 microns. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses) Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  1695.00  View       IQAir GCX Chemisorber  Free Shipping on this Item!**USA 48 States only Chemical Control Advanced air cleaning device for control of formaldehyde, hydrogen sulfide, sulfur dioxide and particulates. Applications Chemical Control of the following: Acetaldehyde, Acetylene, Arsine, Carbon dioxide, Ethylene, Formaldehyde, Hydrazine, Hydrogen cyanide, Hydrogen sulfide, Nitric Oxide, Nitrogen dioxide, Phosphine, Silane, Sulfur dioxide Particle Post-Filter Sleeves Set of 4 - replace every 2-3 yrs Media Cartridges Set of 4 - replace every 2-3 yrs Pre-Filter replace every 6-18 months The IQAir GCX Chemisorber comes complete with sleeves, cartridges, pre-filter, remote control, batteries (for remote control) owners manual, 6 foot power cord, and certificate of guaranteed performance. Optional casters (Mobility 56) sold separately. All systems come complete with filters, owners manual, set of 4 casters (except GCX series and Cleanroom H13), 6 foot power cord, and certificate of guaranteed performance. Specifications Other Information 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Particle Post-Filter Sleeves 5. Gas an Odor Filter Cartridges 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. Pre-Max Pre-Filter (Class H11L) 10. Dual Floor Air Intake General Number of Selectable Fan Speeds 5 Air Delivery (with new filters installed) per Speed 1 - 40 cfm 2 - 60 cfm 3 - 90 cfm 4 - 140 cfm 5 - 270 cfm Maximum Coverage Area 1200 sq ft (based on maximum fan speed and an 8.5 ft ceiling) System Efficiency for Particles 99% or more at 0.3 microns 95% for smaller particles Power Requirements 115 VAC 50-60 Hz The entire electrical system is UL certified. Energy Consumption (Max) 195 W Standby Energy Consumption 2.5 W Power Cable Detachable 6 foot Dimensions H 40" W 15" D 16" Net Weight (including filters) 80 lbs Warranty Period 1 yr on unit including fan motor, excluding filters Filters Number of Filter Stages 3 (particle pre-filtration, gas absorption and particle post-filtration) Total Number of Replacement Filters 9 (1 HEPA-type pre-filter, 4 gas cartridges and 4 post-filter sleeves) Particulate Pre-Filter Mini-pleat HEPA filter with efficiency of 98% at .3 microns Amount of Gas Phase Filter Media Between 18 and 25 lbs. depending on media Cartridge Design Galvanized, reusable metal cylinders Particulate Post-Filter Four electrostatically charged fiber media sleeves Filter Life Pre-Filter 6-18 months Sleeves 2-3 years Cartridges up to 3 years (filter life is dependant on the operating environment) Housing Number of Housing Modules 10 Housing Material PS-ABS and ABS(UV-stabilized) Color of Main Housing/Arms Light Gray/Blue Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree opening on top of unit Fan Fan Type Centrifugal fan, backward curved, single inlet Bearings Maintenance-free steal ball bearings Speed Regulation Voltage reductions via capacitor switching Electronic Control Panel Control Panel Finish Polyester overlay panel Main Display Liquid crystal display, 16 character x 2 line Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs Display Languages English, French, German, Italian, Spanish Customized Gas and Odor Control The GCX Series is IQAir’s highest capacity air cleaner range with customized filters for specific gaseous contaminants and odors. Just like a professional gas mask, IQAir maximizes filter efficiency for different gases and odors by offering the right filter cartridge. And while gas and odor control are a particular strength of these systems, the GCX Series also offers excellent filtration efficiency for particles. The main difference between the GCX and its smaller sibling the GC is, that the GCX contains 25 lbs. of gas phase media while the GC Series contains 12 lbs. In addition the GCX Series features larger pre- and post-particle filters. As a result the maximum air delivery of the GCX is about 20% higher than that of the GC. Gas Cartridge Technology Each IQAir® GCX model contains four reusable filter cartridges with up to 25 lbs. of gas phase media. A wide range of differently formulated cartridges are available to maximize the filtration efficiency for different types of gaseous contaminants. Since IQAir® gas filter cartridges are reusable, replacing them is not only economical, but also environmentally friendly. High-Efficiency Particulate Filtration The particulate filtration GCX units complements the gaseous filtration process by removing over 97% of particles before they can reach the gas phase media. This increases the efficiency and life of the media by preventing its pores from clogging. The GXC units' overall filtration efficiency for particles is 97% at .3 microns. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses) Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.  1695.00  View       SpringAir Ionizer  Covers 2500 square feet This unit does not generate Ozone Here’s How It Works... Most indoor particles that are airborne tend to be positively charged. Negative ions will give some of the particles a negative charge. The positive and negative particles then combine with each other, become heavy and fall to the ground. These irritants can cause various symptoms of discomfort and allergic response. Many of these are invisible and are present in small quantities. But, consider that the average person takes 20,000 breaths per day and spends 90% of his or her time indoors. Placing a SpringAir within the environment could mean breathing easier for the entire family. Overall, the American Lung Association recommends that proven source control strategies be employed as a primary means of reducing exposure to pollutants. However, physical studies which do not measure health effects do show that certain air cleaners are effective in removing certain indoor air pollutants. Thus, as an adjunct to effective source control and adequate ventilation, highly efficient air cleaners can be useful in further reducing levels of certain indoor air pollutants. More research on the health benefits of air cleaners is needed to provide complete evidence that would better address the circumstances of intended use. Based on the limited available data, we conclude that if allergen sources are present in a residence, air cleaning alone has not been proven effective at reducing airborne allergen-containing particles to levels at which no adverse effects are anticipated. Cats, for example, generally shed allergen at a much greater rate than air cleaners can effect removal. Dust mites excrete allergens in fecal particles in sequestered environments (i.e., within the carpet or the bedding). For individuals sensitive to dust mite allergen, the use of impermeable mattress coverings appears to be as effective as the use of a laminar flow air cleaning unit above the bed. Source control should always be the first choice for allergen control in residences. However, using the coverings in conjunction with an air cleaner may increase the effectiveness of the products as well as the comfort of the individual. The reality in most residences is that total elimination of a pollutant source is not always possible or practical. Individuals with severe allergy and asthma symptoms, whose symptoms are not alleviated by other source control and ventilation strategies, may want to try an effective air cleaner in an attempt to aid in further exposure reduction. Although there is no proven health benefit from such a measure, some individuals report that they perceive air cleaners as useful in improving their health status. Styling for Home or Office Compact and portable, the Ionizer can easily be moved to different locations. It can be used in homes, offices, apartments, motel rooms, dorm rooms and recreational vehicles. This unit does not generate Ozone  294.95  View       SpringAir IC-3 Industrial Cleaner  The SpringAir Industrial Cleaner is designed with the professional in mind. It will remove strong odors from unoccupied spaces in a short period of time. Deodorizers simply mask odors and filters only capture some of the airborne particles. The Power of Nature Nature has many ways to produce activated oxygen, a natural air cleaner. For example, we’ve all taken a walk after a thunderstorm and experienced the clean, fresh smell in the air. That’s ozone, or activated oxygen, at work. Activated Oxygen breaks down odors and other pollutants at their source. Normal oxygen O2 is converted to O3, which is commonly called ozone or activated oxygen. O3 will break down odors and other contaminates. The SpringAir employs a special O3 generator to achieve this natural process. Lightning is one way that nature creates activated oxygen Control Odors With the use of Activated oxygen, the SpringAir IC-3 will oxidize odors and eliminate them The IC-3 generates ozone internally and disburses it into the desired area thereby ridding the area of odors at their source. It will control odors from sources such as: Cigarette Smoke Mold & Mildew Smoke Damage Paint Fumes Cooking Odors Decaying Matter Pet Odors Carpet Odors Water Damage Cleaning Fumes New Construction Pesticides The SpringAir IC-3 is designed for industrial applications such as: Automobiles Boats Basements Limousines Food Markets Food Services Airplanes Office Buildings Carpet Cleaning Property Management Motel/Hotel/Resorts Recreational Vehicles Restrooms Walk-In Coolers Warehouses Rental Cars Janitorial Services Fitness Facilities Vans/Buses Remodeling Professional Cleaning Has Never Been So Easy The SpringAir IC-3 is a portable unit that can easily be moved from one problem area to another. The Unit can be used for up to one hour of timed cleaning. It also has a HOLD position for longer term use. The SpringAir Industrial Cleaner can be easily cleaned and maintained. Durable ceramic plates are removed through slots in the back of the unit and can be washed with soap and water. With the SpringAir IC-3 you can now quickly and effectively win the war against odors and their causes. This can help make your job easier and more profitable.  379.00  View       SmokeMaster X-11Q  The SMOKEMASTER® X-11Q. Designed to fit unnoticeably into a drop ceiling. It features optimum noise control, which is ideal for quiet environments . It comes woth a three-speed airflow to 1100 cfm for any commercial environment, for example: offices, retail showrooms, restaurants, bars, etc. It can filter tobacco smoke, odors, VOCs, allergens, pet dander and any other small particles with up to 97% efficiency. The Quiet Solution 3-speed fan allows for quiet operation and great efficiancy and effectiveness, ideal for private offices, conference rooms, and quiet environments/areas. The Hidden Solution The SmokeMaster range mounts flush with the ceiling, and are perfect for any office area, including: Lobby/Reception Areas Sales Offices Conference Rooms Computer Room Executive Offices Clerical Areas Cafeterias Phone or Reservation Areas Employee Lounges The Smokemaster X-11 can easily mount in the 2'x 4' space of a drop ceiling panel, and it will give you maximum air cleaning performance in any office area. The Smokemaster units feature modular construction for ease of maintenance and cleaning. Special mounting hardware will be included for quick installation, as there will be no need for ductwork. The Economical Solution The qualityof your indoor air can affect you in more ways than one, because the comfortability of your clients/customers will determine how long they'll stay. The conflicts between smokers and non-smokers will thus be solved, without interrupting the work flow, smoker seperation and/or costly remodeling. How a Smokemaster Works Contaminant particles receive an electrical charge as they pass into the electronic cell, and they are then attracted and held to the oppositely charged collector plates, almost the same way metal filings are collected by a magnet. The air vent provides dilution control of gaseous contaminants. An activated carbon filter is optional, and can be used to adsorb odors and gases which will further freshen the air. Key Benefits The Smokemaster's Coanda Air Pattern draws the dirty air into the unit and then it recirculates the clean air four directions, for immediate and thorough results. The Smokemaster X-11 mounts flush in a 2' x 4' space of a drop ceiling panel, and it cleans up to 1100 cubic feet of air per minute. Four air outlet grilles can be rotated to customize the air pattern. Up to 96% of airborne pollen, dust, smoke and dirt in the air can be cleaned. It's Quiet and Energy Efficient Specifications The X-Series electronic air cleaners are self-contained units and are designed to install flush with a drop ceiling. Efficiency: Up to 96% efficiency on airborne particles such as cigarette smoke and dust. Diagnostics: Power supply is indicated by a status light, and a test button indicates collector operation. Motor: Quiet, energy efficient, permanent split capacitor fan motor is vibration isolation mounted. Air Vent: Provides dilution control of gaseous contaminants. Detailed Specs: Model: X-11Q Capacity/Electrical Ratings: 120V/60Hz Low Speed: 500 cfm/2.4 Amp., 200 Watts Medium speed: 700 cfm/2.7 Amp., 230 Watts High Speed: 1100 cfm/3.4 Amp., 270 Watts Dimensions: 46 3/4" x 22 3/4" x 13 9/16" (fits 2' x 4' tile opening) Installed Weight: 83 lbs. Shipping Weight: 101 lbs.  1641.00  View       SmokeMaster C12  The C12 air cleaner is ideal for mounting to solid ceilings. It can capture of both particulate and gaseous contaminants, especially cigarette smoke. Electrostatic cells and impregnated carbon filter is highly effecient. Odors, tobacco smoke, pollen, dust, vapors and many other irritants are removed, eliminating the need to purchase additional filters. It has a 3 speed fan, which quietly and efficiently cleans an area using the Coanda Air Flow Pattern - air cleaning with airflow from 800 cfm to 1250 cfm for any commercial environment--offices, retail showroom, restaurants, bars and more. How It Works By means of a process called "Electrostatic Precipitation" airborne contaminates are trapped. Particles are first given a strong electrical charge in the charging section of each cell. The charged particles will then be attracted and held by the collection section of the cell until it is cleansed at regular intervals. The Smokemaster has its own fan which circulates the air through the unit. Year After Year Your Smokemaster is equipped with lightweight (9 1/2 lbs.) two stage cells, other than the less efficient and costly fiber filters which need to be replaced periodically, and/or electronic air cleaners with plate-type cells. These components provide Smokemaster with air cleaning efficiency and can trap particles so small that about 7000 would stretch across a dot. No periodic mechanical services are required, or tools are needed to be purchased, as the cells have no moving parts, which can wear down after a time. Smokemasters key feature is the multidirectional air pattern Smokemaster's success is hugely due to the "Coanda Aerodynamic Principle." Most of the other air cleaners can recirculate the air in only one direction and this limits the amount of contaminated air that can reach the air cleaner. Smokemaster's unique four-way method of air recirculation is multi-directional, causing this air cleaner to get the maximum amount of contaminated air to the machine very efficiently. More air will reach your Smokemaster while it eliminates other annoying drafts. This creates comfort for people and much cleaner air. Key Benefits Coanda Air Flow Pattern Discharge Louvers - 4 sides Color Options - Ivory, Woodgrain, Black Removable Prefilters and Grille Metal mesh prefilters catch the larger particles before it enters the electronic cells. A System Indicator Lamp Monitors the electrical output, which can automatically indicate any system malfunction. Three-Speed Control: Low 800cfm Medium l 050cfm High l 250cfm Energy efficient motor Two electronic cells remove easily with attached grip handles. A Voltage doubler circuit provides more efficient air cleaning with a compact cell. A hinged Access Door allows for easy access to components for periodic cell and prefilter cleaning. Safety interlock discharges all power when door is opened. Built-in test button assures collector performance. Optional Accessories Wash kit Wall Mounting Kit Remote 3-Speed Switch Plate Assembly Serviceable components simply unplug for replacement in the event of a service being necessary. The air cleaner can be easily mounted on a ceiling or wall. Specifications: Model C-12 Capacity (cfm) Low Speed (800) Med. Speed (1050) High Speed (1250) Electrical Ratings Voltage and Frequency - 120V ac 60 Hz Current and Power Consumption - Low Speed 2.4A, Med. Speed 2.7A, High Speed, 3.3A Dimensions (inches) Length: 25 Width, 25 Depth, 11 1/2 Weight Shipping 75 lbs. Effectively removes airborne particles down to 0.01 micron with up to 97% efficiency. (1 micron = 1/25,400th inch) Power 3 prong 10 foot power cord plugs into standard grounded outlet. Installation The Smokemaster is easily mounted on the ceiling or wall and plugs into a regular 120 volt outlet. The best location for this unit is the closest point to the concentration of smoke and dirt producing activities. A qualified representative can best advise you as to the capacity and sizing requirements for your specific needs. Maintenance Lightweight all aluminum prefilters and cells are quickly and easily cleansed by being soaked in any conventional wash container. Cleaning intervals must be determined by pollution density in the area being cleaned.  1689.00  View       SmokeMaster X-400  The SMOKEMASTER® X400. Designed to fit unobtrusively into a drop ceiling, and features optimum noise control--ideal for quiet environments. The three-speed airflow from 175 cfm to 400 cfm is designed for any commercial environment, whether it be offices, retail showroom, restaurants, bars and more. Tobacco smoke, odors, VOCs, allergens, pet dander and any other small particles are all filtered by the X400 It's essential in today's life that your office is comfortable, healthy and smoke-free, as clean air improves productivity, health and morale of employees - clean air simply creates a better business. The Economical Solution Indoor Air Quality affects your bottom line in more ways than one. And you can put an end to the conflicts between smokers and non-smokers, without interrupted work flow, smoker segregation or costly remodeling. The Hidden Solution Since these models mount flush in the ceiling, they're perfect for any office area, including: Lobby/Reception Areas Sales Offices Conference Rooms Computer Room Executive Offices Clerical Areas Cafeterias Phone or Reservation Areas Employee Lounges The Smokemaster X-400 replaces a 2'x 2' ceiling panel whihc thus makes it an ideal purchase for all smaller office areas, scattered in larger spaces - directly above smokers' workstations, for example. All Smokemaster units feature modular construction for easy cleaning and maintenance. Special mounting hardware is included for quick installation, and no ductwork is required. The Quiet Solution Smokemaster's 3-speed fan allows for quiet operation without sacrificing effectiveness. It's ideal for private offices, conference rooms, or other areas where noise levels may be a factor. How a Smokemaster Works Contaminant particles, such as those in cigarette smoke, receive an electrical charge as they pass into the electronic cell, and are then attracted to oppositely charged collector plates, where they are held. The air vent provides dilution control of gaseous contaminants. Optional activated carbon filter adsorbs odors and gases to further freshen the air. Key Benefits Coanda Air Pattern draws dirty air into the Smokemaster and clean air is recirculated in four directions, for thorough and immediate results. Model X-400 is 2' x 2', mounts flush in ceiling, and cleans up to 400 cubic feet of air per minute. Clean the air in your office of up to 96% of airborne smoke, pollen, dust and dirt. Quiet Energy Efficient Specifications The X-Series electronic air cleaners are self-contained units designed to install flush with a drop ceiling. Efficiency: Up to 96% efficient on airborne particles such as cigarette smoke and dust. Diagnostics: Status light indicates power supply operation. Test button indicates collector operation. Motor: Quiet, energy efficient, permanent split capacitor fan motor is vibration isolation mounted. Air Vent: Provides dilution control of gaseous contaminants. Detailed Specs: Model: X-400 Capacity/Electrical Ratings 120V/60Hz Low Speed 175 cfm/0.4 Amp., 50 Watts Medium speed 275 cfm/0.55 Amp., 65 Watts High Speed 400 cfm/0.8 Amp., 80 Watts Dimensions 22 3/4" x 22 3/4" x 13 1/2" (fits 2' x2' tile opening) Installed Weight 44 lbs. Shipping Weight 54 lbs.  1060.80  View       NQ Clarifier Standard  The NQ Clarifier is an outstanding portable air purification system. The unit has 4 levels of filtration as well as an ultraviolet purification zone that destroys bacteria, viruses, fungi, allergens and molds. Its compacity in terms of weight, size and mobility make this equipment ideal for all general applications. Within a very short period of time the system filters and purifies, thus improving the indoor air quality in various locations such as residential, commercial, medical, industrial or military applications. Efficacy proven in real conditions for over 10 years (references available on request). The ultraviolet disinfection allows our units to offer a high protection without utilising any chemicals or added materials. General features: - High efficiency 99.97% HEPA - Mobile, quickly deployed - Autonomous - System utilising recognised processes - Low Maintenance - Economical The NQ Clarifier purifies air with 2 recognized processes: FILTRATION - Four stages of mechanical filtration: - 10 µm particulate pre-filter - Formulated activated carbon filter - HEPA filter ASHRAE - H13 (99.97% at 0.3 µm) - Carbon impregnated post filter UV DISINFECTION - Two or four germicidal UV lamps providing a total UV dosage of 13,000 to 26,000 µWsec/cm² to inactivate micro-organisms Working Principle: - The air is recirculated to 4 inlet grills (7’’ x 10’’ - 178 x 254 mm) - Particles > 10 µm are trapped by the pre-filter - The air then passes trough an activated carbon filter, optimised to treat odors problems, VOC’s and chemical pollutants - After 99.97% of particles and micro-organisms > 0.3 µm are filtered by an HEPA filter H13 - Viruses, bacteria, fungi, allergens and molds are finally destroyed by UVC germicidal irradiation in the UV zone - Purified air is discharged via a post filter and a patented air discharge system “Topflow” that maximises the room effective air change rate Additional Information Product Dimensions: 28" H. x 15" W. x 14" D./Weight- 48lbs. 71 cm x 38 cm x 36 cm - 22 kg. UV Lamps: 2 UV Dosage: Dosage in Kill Zone - 13,000 µw-sec/cm2 Warranty: 2 Years Notes: NQ Environmental Inc. reserves the right to upgrade engineering specifications without notice. Decibel Levels: 55 dBA at highest speed Number of Fan Speeds: Variable (114 -350 cfm) Air Delivery (with new filters installed) per Speed: CFM - 350 Maximum Coverage Area: 900 sq ft (based on maximum fan speed and an 8 ft ceiling) System Efficiency for Particles: 99.97% at 0.3 microns Power Requirements: 120 volt Energy Consumption (Max): 100 watts Power Cable: Grounded - 10 ft. - 'Hospital Grade' / 'Green Dot' (UL498) / (NEMA5-15P) Number of Filter Stages: 4 Filter Efficiency: 99.97% DOP at .3 microns  699.00  View       MistBuster Quad  The MistBuster® Quad is designed to capture and eliminate mist and smoke from metalworking applications in industry. Patented mist eliminator technology insures high efficiency with no disposable filters in a compact machine mounted package. A Variety of mounting options allow for maximum versatility. MistBuster® Quad features standard double pass configuration to insure maximum efficiency and longevity. Variable speed control allows for precise control over airflow and efficiency. -Abbreviated Specifications- For the MISTBUSTER ® Quad Mist Collector & Eliminator (download PDF at bottom for full brochure) Air Flow: Infinitely adjustable from 50-1250 cfm @ 0.6" wg top discharge Efficiency: Up to 99.9% (per ASHRAE 52.2) Dimensions: 26" W x 26.4" D x 33" H, 256 lbs. Filtration: 1st: 4" thick aluminum mist impingers 2nd: ESP Cells - 105.8 sq. ft of electronic collector area 3rd: 2nd pass of electrostatic cells, additional 105.8 sq. ft 4th: 2" thick aluminum mesh Power Input: 115 Vac, 60 Hz, 4 amps 230 Vac, 60 Hz, 2 amp Selector Switch: Patented selector switch for synthetic, water or oil based coolant *This mist collector unit comes completely prewired and includes a 10' power cord with molded plug. Click to download brochure  3404.00  View       MistBuster Infinity  The MistBuster ® Infinity is the most recent addition to the MistBuster ® series of air cleaners offered from Air Quality Engineering, Inc. The MistBuster ® Infinity is designed to capture and clean mist and smoke from metalworking applications in industry. A long life filter with with 288 sq. ft. proprietary media, offers extensive times between filter replacements. A Variety of mounting options allow for maximum versatility. Variable speed control allows for precise control over airflow and efficiency. -Abbreviated Specifications- For the MISTBUSTER ® Infinity Mist Eliminator (download PDF at bottom for full brochure) Air Flow: Infinitely adjustable from 50-1000 cfm top discharge Efficiency: Minimum 95% DoP on 0.3 micron particles Dimensions: 27" L x 26.25" W x 31.64" H, 185 lbs. Filtration: Four inches of aluminum mist impingers then Long Life 95% DoP filter with 288 sq. ft. of media Power Input: 115 Vac, 60 Hz, 9.5 amps 230 Vac, 60 Hz, 4.75 amps *This mist collection unit comes completely prewired and includes a 10' power cord with molded plug. Click to view brochure  3300.00  View       Everclear CM-11E  The 220 volt product is intended for use in countries other than the USA where 220 voltage is used The EverClear is the ultimate air cleaner for a restaurant, bingo hall, bar or other commercial application where indoor air pollution is a concern. The EverClear captures both particulate and gaseous contaminants while remaining hidden installed in a false ceiling. The EverClear removes odors, tobacco smoke, pollen, dust, vapors and many other irritants. -Abbreviated Specifications- for the EverClear, from our line of HEPA air cleaners - Perfect for a Restaurant (download PDF at bottom for full specifications) Dimensions: 46.675"L x 22.675"W x 19.675"D x 200lbs. Air Flow: Up to 1100 CFM Power Input: 115 Vac, 60 hz, 1.1 amps Motor: ½ hp PSC with sealed ball bearings Filters: Pre-filter:1" aluminum mesh. V.O.C. filter modules, with 10 disposable filters each. 44 lbs of Adsorbent Media is a combination of Activated Carbon and Permanganate Efficiency: 95% D.O.P. @ .3 microns BROCHURES: EverClear.PDF  2114.00  View       FumeFighter 500  The FumeFighter® fume extraction air cleaner, is designed to capture and clean fumes and gases generated from soldering, adhesives, stained glass work and many more. Exceptionally high quality air cleaner package couples the largest filters available in the industry with a compact, vibration free blower package. Filters include a true 99.97% HEPA filter with over 82 sq. ft of media and a 15 lb. sorbent media filter to insure high efficiency and longevity. The HEPA filter alone in this unit is as large as many of the competitors whole air cleaner! The gas filter cartridge is also 5 times larger than the average competitor's gas cartridge. It has been shown that a doubling of media area results in filter life approximately 4 times longer for a comparable airflow. The blower package is a German built motorized impeller using a very high efficiency external rotor motor that delivers more airflow with less energy. The FumeFighter comes standard with an infinitely variable speed control that provides maximum versatilty to the user while consuming less than 2 amps at 115V. All of this in a compact unit designed to fit under a standard bench with a very cost competitive price tag and lower operating costs in the long run. -Abbreviated Specifications- For the FumeFighter fume extraction air cleaner Air Flow: 0-230 cfm Efficiency: 99.97% DOP efficiency (based on 0.3 micron particles) Dimensions: 18" L x 18" W x 25" H, 71 lbs. Filtration: 1st: 15" x 60" carbon impregnated prefilter 2nd: True 99.97% HEPA filter with 82 sq. ft of media 3rd: Gas filtration cartridge containing 15 lbs. of sorbent media Power Input: 115 Vac, 60 Hz, 2 amps 230 Vac, 60 Hz, 1 amp Arm Option 3" Stainless steel arm, self-supporting with capture hood. 48" long *This fume extractor air cleaner comes completely prewired and includes a 10' power cord with molded plug. Click to view Fume Fighter brochure  1703.00  View       M33 Air Filtration System  The M33 is a self-contained media air filtration system designed for general background or ducted for source capture applications and can be ordered with three-stage filtration which will effectively remove a broad range of airborne contaminants including fine dusts, smoke, soot, vapors mist, VOC's and more at a rate of up to 1300 cfm. -Abbreviated Specifications- For the M33 Air Filtration System (download PDF at bottom for full brochure) Cabinet: 16-gauge steel cabinet with a chemical resistant baked enamel, ivory texture coated finish Power Input: 110-120 Vac, 60 Hz, 1 Phase, 12 amps 208-240 Vac, 60 Hz, 1 Phase, 6 amps Motor: 1 HP maintenance-free sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments. Blower: Forward curved, ball bearing, belt driven centrifugal blower Airflow: Up to 1300 cfm Filtration: Pre-filter - 12" x 24" x 4" 35% pleated media Primary - Bag filters range in efficiency from 45 % to 98 % Optional - 22 lb. Bulk refillable activated carbon module Optional - Additional prefilter and primary filter upgrades available *Unit comes completely prewired and includes a 10' power cord with molded plug.Click to view M33 brochures  2249.00  View       M32V Industrial Air Filter  The M32V media industrial air filter features a compact design utilizing an innovative polypropylene minipleat air filter designed to improve filter life and reduce maintenance. This compact, antimicrobial, washable filter media extends filter life 3 and a half times over standard multi-pocket bag filters reducing annual operating costs. -Abbreviated Specifications- For the M32V Industrial Air Filters (download PDF at bottom for full specifications) Cabinet: 16 Gauge welded steel cabinet with a baked enamel, textured coated finish Power Input: 115V, 60 Hz, 1 phase: 12 amps 208-240V, 60 Hz, 1 phase: 6.0 - 6.6 amps Motor : 1 Hp sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments Blower Forward curved, ball bearing, belt driven centrifugal blower. This blower is capable of moving 2250 cfm free air. Airflow: Up to 1300 cfm Prefilter: 30-35% efficiency, pleated 12" x 24" x 4" cotton and synthetic blend *Unit comes completely prewired and includes a 10' power cord with molded plug. Click to view the M32V.PDF brochure  3647.00  View       M33V Air Filtration System  The M33V is a portable version of the M33 that maximizes flexibility in use. Can be ordered with three-stage filtration which will effectively remove a broad range of airborne contaminants including fine dusts, smoke, soot, vapors mist, VOC's and more at a rate of up to 1300 cfm. -Abbreviated Specifications- For the M33V Air Filtration System (download PDF at bottom for full brochure) Cabinet: 16-gauge steel cabinet with a chemical resistant baked enamel, ivory texture coated finish Power Input: 110-120 Vac, 60 Hz, 1 Phase, 12 amps 208-240 Vac, 60 Hz, 1 Phase, 6 amps Motor: 1 HP maintenance-free sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments. Blower: Forward curved, ball bearing, belt driven centrifugal blower Airflow: Up to 1300 cfm Filtration: Pre-filter - 12" x 24" x 4" 35% pleated media Primary - Bag filters range in efficiency from 45 % to 98 % Optional - 22 lb. Bulk refillable activated carbon module Optional - Additional prefilter and primary filter upgrades available *Unit comes completely prewired and includes a 10' power cord with molded plug. Click to view brochure  2622.00  View       M330 Mist Collector  The new M330 is a self-contained media air cleaning system (often referred to as mist collectors) designed for source capturing coolant mist applications in industry. The M330 can be ordered in three stage filtration which will effectively remove a broad range of contaminants including mist, smoke, soot, vapors, VOC's and more at a rate of up to 1300 CFM. -Abbreviated Specifications- For the M330 Mist Collectors (download PDF at bottom for full brochure) Power Input: 115 Vac, 60 Hz, 1 Phase, 12 amps 230 Vac, 60 Hz, 1 Phase, 6 amps Motor: 1 HP maintenance-free sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments. Blower: Forward curved, ball bearing, belt driven centrifugal blower Airflow: Up to 1300 cfm Filtration: Pre-filter - Two aluminum mesh, mist impingers Primary - Bag filters range in efficiency from 65 % to 95 % Optional - Up to 135 lb. Bulk refillable activated carbon modules Optional - Additional prefilter and primary filter upgrades are available for these mist collectors *Unit comes completely prewired and includes a 10' power cord. Click to view brochure  2729.00  View       M66 Air Purification System  The M66 is a self-contained media air purification system designed for general background or ducted for source capture applications. The M66V is a portable version that maximizes flexibility in use. Both air purification systems can be ordered in a variety of filter configurations including electrostatic, HEPA, activated carbon and more which will effectively remove a broad range of airborne contaminants including fine dusts, smoke, soot, vapors mist, VOC's and more at a rate of up to 3200 cfm. Optional accessories include backward inclined blower packages up to 5 hp for additional static pressure capacity, silencer, overhead mechanical arms with halogen lighted hoods, HEPA filter options and more. -Abbreviated Specifications- For the M66 Air Purification System (download PDF at bottom for full specifications) Power Input: 110-120 Vac, 1 Phase, 12 amps 208-240 Vac, 1 Phase, 6.6 amps 208-240 Vac, 3 Phase, 3.8 amps 440-480 Vac, 3 Phase, 1.9 amps Motor: 1 HP maintenance-free sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments. Blower: Forward curved, ball bearing, belt driven centrifugal blower Optional Blower: Upgrade to backward inclined direct drive for higher static pressure capability Airflow: Up to 3200 cfm Filtration: Pre-filter - 24" x 24" x 4" 35% pleated media Primary filter - Pocket filters range in area from 66 sq. ft. to 200 sq. ft. and efficiencies from 35% to 95% Optional - 90 lb. Bulk refillable activated carbon module(s) Optional - Additional prefilter and primary filter upgrades available BROCHURES: M66.PDF  2914.00  View       M66V Air Purification System  The M66V is a portable version that maximizes flexibility in use. Both air purification systems can be ordered in a variety of filter configurations including electrostatic, HEPA, activated carbon and more which will effectively remove a broad range of airborne contaminants including fine dusts, smoke, soot, vapors mist, VOC's and more at a rate of up to 3200 cfm. Optional accessories include backward inclined blower packages up to 5 hp for additional static pressure capacity, silencer, overhead mechanical arms with halogen lighted hoods, HEPA filter options and more. -Abbreviated Specifications- For the M66/M66V Air Purification System (download PDF at bottom for full specifications) Power Input: 110-120 Vac, 1 Phase, 12 amps 208-240 Vac, 1 Phase, 6.6 amps 208-240 Vac, 3 Phase, 3.8 amps 440-480 Vac, 3 Phase, 1.9 amps Motor: 1 HP maintenance-free sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments. Blower: Forward curved, ball bearing, belt driven centrifugal blower Optional Blower: Upgrade to backward inclined direct drive for higher static pressure capability Airflow: Up to 3200 cfm Filtration: Pre-filter - 24" x 24" x 4" 35% pleated media Primary filter - Pocket filters range in area from 66 sq. ft. to 200 sq. ft. and efficiencies from 35% to 95% Optional - 90 lb. Bulk refillable activated carbon module(s) Optional - Additional prefilter and primary filter upgrades available BROCHURES: M66V.PDF  4595.00  View       M67 SmokeMaster  The Smokemaster™ M67 is a self-contained multi-stage media air cleaning system / industrial air filter designed for general background cleaning of dust, smoke, soot or other airborne particulate. The M67 industrial air filter is a good choice for light duty applications such as sanding, buffing, welding or autmotive refinishing at a rate of up to 1980 cfm. -Abbreviated Specifications- For the M67 Industrial Air Filter (download PDF at bottom for full specifications) Cabinet: 18-gauge steel cabinet with a black epoxy paint finish. Power Input: 110-120 Vac, 1 Phase, 8.0 amps 208-240 Vac, 1 Phase, 4.0 amps Motor: Heavy-duty ¾ HP, 3 speed motor with sealed ball bearings. Blower: Direct drive, forward curved Airflow: Up to 2000 cfm Filtration: Pre-filter - 24" x 24" x 2" 35% pleated media Primary filter - Cube or bag filters range efficiencies from 35% to 95% Warranty: 36 Month Parts *Unit comes completely prewired and includes a 10' power cord with molded plug. Click to view brochure  1905.00  View       M68 Air Cleaner  The M68 is a self-contained HEPA air cleaner rated at 99.97% efficient @ 0.3 microns. The M68 is a portable version that maximizes flexibility in use. Both units are ideal where higher efficiency filtration is required. The M68 may also be installed as a post filter module in conjunction with the M66 or F66 air cleaners. Optional accessories include backward inclined blower packages up to 5 hp for additional static pressure capacity, silencer, overhead mechanical arms with halogen lighted hoods and more. -Abbreviated Specifications- For the M68/M68V Air Cleaner (download PDF at bottom for full specifications) Cabinet: 16-gauge steel cabinet with a chemical resistant baked enamel, ivory texture coated finish. Power Input: 110-120 Vac, 1 Phase, 17.2 amps 208-240 Vac, 1 Phase, 8.8 amps 208-240 Vac, 3 Phase, 7.0 amps 440-480 Vac, 3 Phase, 3.5 amps Motor: 1.5 HP maintenance-free sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments. Blower: Forward curved, ball bearing, belt driven centrifugal blower Optional Blower: Upgrade to backward inclined direct drive for higher static pressure capability Airflow: Up to 2000 cfm Filtration: Pre-filter - 24" x 24" x 4" 35% pleated media Primary filter - 24" x 24" x 12" HEPA 99.97% certified efficiency at 0.3 microns  3858.00  View       M68V Air Cleaner  The M68V is a self-contained HEPA air cleaner rated at 99.97% efficient @ 0.3 microns. The M68V is a portable version that maximizes flexibility in use. Both units are ideal where higher efficiency filtration is required. The M68V may also be installed as a post filter module in conjunction with the M66 or F66 air cleaners. Optional accessories include backward inclined blower packages up to 5 hp for additional static pressure capacity, silencer, overhead mechanical arms with halogen lighted hoods and more. -Abbreviated Specifications- For the M68/M68V Air Cleaner (download PDF at bottom for full specifications) Cabinet: 16-gauge steel cabinet with a chemical resistant baked enamel, ivory texture coated finish. Power Input: 110-120 Vac, 1 Phase, 17.2 amps 208-240 Vac, 1 Phase, 8.8 amps 208-240 Vac, 3 Phase, 7.0 amps 440-480 Vac, 3 Phase, 3.5 amps Motor: 1.5 HP maintenance-free sealed ball bearings and thermally protected. Adjustable motor sheave allows for field airflow adjustments. Blower: Forward curved, ball bearing, belt driven centrifugal blower Optional Blower: Upgrade to backward inclined direct drive for higher static pressure capability Airflow: Up to 2000 cfm Filtration: Pre-filter - 24" x 24" x 4" 35% pleated media Primary filter - 24" x 24" x 12" HEPA 99.97% certified efficiency at 0.3 microns  6069.00  View       M73 Industrial Air Filter  The M73 Industrial Air Filter is a self-contained media air cleaning system designed for general background or ducted for source capture applications. The M73 includes the new E.S.F. MicroGlass Filters for long filter life and high efficiencies to effectively remove smoke, mist, dust and other airborne contaminants at a rate of up to 6000 CFM.The M73 Model has 208-240v or 440-480v options. Both of these are 5 HP Backward Inclined, 3 phase NOT field upgradeable from 3 hp. -Abbreviated Specifications- For the M73 Industrial Air Filter (download PDF at bottom for full specifications) Dimensions: 49.5" x 46.5" x 31.6" 405 lbs. Power Input: 208-240 VAC, 60 Hz, 3 Phase, 9 Amps 440-480 VAC, 60 Hz, 3 Phase, 5 Amps Motor: 3 Hp sealed ball bearings and thermally protected. Optional upgrade 5 Hp motor/blower package available. Blower: Belt driven, dual centrifugal blower wheels with ball bearings Airflow Capacity: Up to 6000 cfm Filtration: Pre-filters - Two 30-35% pleated prefilters, 24" x 24" x 4" Primary filters - Two 90-95% minipleat polypropylene, 24" x 24" x 12 " Filter Area: Upto 400 square feet of filter media area  4436.00  View       F62B - Electronic Air Cleaners  Featuring the unique Coanada airflow pattern, the F62B electronic air cleaner takes advantage of hot process dynamics - the natural tendency of particles to rise along with the heat created by industrial processes. Polluted indoor air naturally enters the bottom of the air cleaner, and clean air recalculates in all four directions back to the work area. Each F62B creates its own airflow, minimizing sizing and placement problems. This electronic Coanada air filtration unit can be positioned directly above the source of the contaminant to capture pollutants before they have a chance to disperse. -Abbreviated Specifications- For the F62B Electronic Air Cleaners (download PDF at bottom for full specifications) Power Input: 120 Vac, 60 Hz, Single Phase 8.7 Amps 208-240 Vac, 60 Hz, Single Phase, 3.9 Amps 208-240 Vac, 60 Hz, Three Phase, 3.4 Amps 440-480 Vac, 60 Hz, Three Phase, 1.7 Amps Electronic Cells: 2 included providing 218 square feet of surface area Efficiency: Up to 95% based on ASHRAE 52-76 test method Power Supply: Self-regulating, dual voltage, industrial rated power supply Motor: 3/4 hp maintenance free motor. Accessories: Optional Canopy Hood, Drain Pan, Remote Control Kit and Carbon Filter  4513.00  View       AQE 8000 Dust Collector  The AQE 8000 is an external unit that offers up to 5700 cfm of air flow. These dust collectors utilize a pulse jet cleaning system that increases filter life and service interval making it ideal for industrial, heavy dust loading applications. Standard photohelic controller minimizes compressed air requirement while monitoring filter life. Constructed of 7, 11, and 12 gauge mild steel, then painted with a durable powder coat finish, however it does not include a silencer. Options include customized blower packages, filter cartridges, outlet dampers which control flow of air and more. See the AQE 8000 Dust Collector Brochure for more information. Principles of Operation: The AQE 8000 is self cleaning. Four solenoid valves utilized for reverse pulse cleaning are maintained by a photohelic controller. By simple adjustable presets, the reverse pulse cleaner is scheduled to clean at a desired pressure drop across the filters. The controller offers the option of both on-line and off-line cleaning. Cartridge cleaning is accomplished by the use of 3/4" Goyen Valves and sonic nozzles positioned behind the cartridge filters. The specially designed sonic nozzles precisely direct and increase the air velocity into the cartridge filter to reverse pulse the contaminants from the filters. Features: Automatic cleaning system Solid state control timer 1100 square feet of media 99.8% efficient at .5 micron Disconnect and overload protection Manufacturer's warranty Technical Specifications for AQE 8000 Jet Dust Collector DIMENSIONS: 113" H x 45" W x 83" D 143" H x 45" W x 88" D (with motor) WEIGHT: Motor Option Installed Shipping no motor 1400 lbs. 1625 lbs. 7.5 HP motor 1650 lbs. 1875 lbs. 15 HP motor 1750 lbs. 1975 lbs. CONSTRUCTION: The AQE Model 8000 is constructed of 7, 11, and 12 gauge mild steel, then painted with a polyurethane coating. The AQE 8000 is manufactured with a standard 18" diameter inlet and two 14" diameter hopper outlets. Twelve inch optional inlet diameter. Smaller inlet diameters available. CARTRIDGE: Standard cartridges are manufactured of a non-woven filter media rated at 99.8% efficiency for 0.5 micron size particulate. Each cartridge is constructed with a galvanized filter cage which is 98% open. The filter is designed to withstand temperatures up to 200°F. Efficiency: Up to 99.8% on 0.5 microns CONTROLLER: Four solenoid valves utilized for reverse pulse cleaning of the AQE 8000 are maintained by a photohelic controller. By simple adjustable presets, the reverse pulse cleaning is scheduled to clean at a desired pressure drop across the filters. This solid state controller is pre-wired and housed within a NEMA 4 enclosure. The reverse pulse controller offers the option of both on-line and off-line cleaning. REVERSE PULSE SYSTEM: Cartridge cleaning is accomplished by the use of 1" Goyen Valves and sonic nozzles positioned behind the cartridge filters. The specially designed sonic nozzles precisely direct and increase the air velocity into the cartridge filter to reverse pulse the contaminants from the filters. Filtration: Standard with eight cartridges totaling 2200 square feet of media AIRFLOW RANGE: 5700 cfm max. with 15 HP motor 3800 cfm max. with 7.5 HP motor Power Input: 7.5 HP motor: 208 Vac, 60 Hz, 3 phase, 19 Amps 230 Vac, 60 Hz, 3 phase, 17 Amps 460 Vac, 60 Hz, 3 phase, 8.8 Amps 15 HP motor: 208 Vac, 60 Hz, 3 phase, 37.5 Amps 230 Vac, 60 Hz, 3 phase, 34 Amps 460 Vac, 60 Hz, 3 phase, 17 Amps NUMBER OF CARTRIDGES: 8 MEDIA AREA PER CARTRIDGE: 275 square feet MEDIA AREA PER UNIT: 2200 square feet CARTRIDGE DIMENSIONS: 30" x 12.75" x 8.375" AQE8000 Industrial Dust Collector Dimensions and Air Flow How many Cartridges do I need? Sizing is simple with the AQE Model 8000 Dust Collector. Once the airflow (cfm) requirement for your system has been determined, all you need to do is place that number within the sizing formula, locate the air to media ratio which applies to your application, and you will then know the number of cartridges necessary for your application. (CFM ÷ Air-to-Media Ratio) ÷ 275 sq ft of Media per Cartridge = Required Cartridges Contaminant Ratio Contaminant Ratio Activated Carbon 2.3 Perchlorates 1.6 Alumina 2.2 Petrochemicals Dry 1.75 Carbon Black 2.0 Pigments: Metal / Sym 1.5 Cement 1.7 Pigments: Paint 1.8 Ceramic Pigment 2.2 Plasma Arc / Laser Cut 1.1 Clay / Brick Dust 1.8 Plaster 2.2 Coal 2.2 Powder Coating / Black 1.5 Cocoa 1.6 Powder Coating / White 1.9 Coffee 1.6 Powder Coating / Teflon 1.5 Coke 2.0 Rock Dust 2.5 Diatomaceous Earth 2.0 Rubber Chemical Additives 2.0 Dyes 1.6 Salicylic Acid 1.5 Fertilizers 1.8 Salt / Mineral 2.2 Flour 1.9 Sand (Not Foundry) 2.5 Flourspar 2.0 Sandblast Dust 2.5 Fly Ash 2.2 Selenium 1.5 Fumes / Metalurgical 1.4 Silicates 1.9 Graphite 2.0 Starch 1.9 Gypsum 2.0 Stereates 1.9 Lime / Hydrated 2.0 Sugar (40% RH or Less) 1.75 Lime Stone 2.0 Talc 1.7 Metal Powder 2.0 Titanium / Torch Cuting 0.8 Welding Fume (Source Capture) 2.0 Toner 1.25 Welding Fume (Ambient) 2.2 BROCHURES: AQE_8000.PDF  10621.00  View       F33 Air Purification System  The F33 is a self-contained air purification system designed for general background cleaning or ducted for source capture applications. It efficiently captures a broad range of airborne contaminants including smoke, fumes, soot, light dusts and coolant mists at a rate of up to 1250 CFM, with no costly filter replacement. -Abbreviated Specifications- For the F33 Air Purification System (download PDF at bottom for full specifications) Power Input: 120 Vac, 60 Hz, Single Phase 12 Amps 208-240 Vac, 60 Hz, Single Phase, 6 Amps Electronic Cell: 1 included providing 109 square feet of surface area Efficiency: Up to 95% based on ASHRAE 52-76 test method Power Supply: Self-regulating, dual voltage, industrial rated power supply Motor: 1 hp maintenance free motor. Adjustable motor sheave allows for field airflow adjustment Blower: Forward curved, ball bearing, belt driven centrifugal blower. Unit comes completely prewired and includes a 10' power cord with molded plug. Click to view brochure  3272.00  View       AQE 4000 Overhead Jet Dust Collector & Fume Extractor  This jet dust collector is a self-contained overhead cartridge system for use in source capture or ambient applications . Pulse jet cleaning system increases filter life and service interval making it ideal for heavy dust loading applications. Available options for this jet dust collector include 11' and 14' arms, hood mounted halogen light, source capture plenums, dust hopper, drum mounting kit, silencer and many more. -Abbreviated Specifications- For the AQE4000 Jet Dust Collector (download PDF at bottom for full specifications) Dimensions: 21" H x 58" W x 98" D (Armed or Ducted model) 656 lbs. Power Input: 208-240 Vac, 3 phase, 13.4 amps 440-480 Vac, 3 phase, 6.6 amps Motor: 5 HP Airflow: 2500 cfm total, 1250 cfm per arm Filtration: Four high efficiency cartridge filters, 1100 square feet total (Other filter media and configurations available) Efficiency: Up to 99.8% on 0.5 microns Cleaning System: Automatic pulse cleaning system BROCHURES: AQE_4000.PDF  6070.00  View       F33V Air Purification System  The F33V is a self-contained air purification system designed for general background cleaning or ducted for source capture applications, and is the mobile version of the F33. It efficiently captures a broad range of airborne contaminants including smoke, fumes, soot, light dusts and coolant mists at a rate of up to 1250 CFM, with no costly filter replacement. -Abbreviated Specifications- For the F33V Air Purification System (download PDF at bottom for full specifications) Power Input: 120 Vac, 60 Hz, Single Phase 12 Amps 208-240 Vac, 60 Hz, Single Phase, 6 Amps Electronic Cell: 1 included providing 109 square feet of surface area Efficiency: Up to 95% based on ASHRAE 52-76 test method Power Supply: Self-regulating, dual voltage, industrial rated power supply Motor: 1 hp maintenance free motor. Adjustable motor sheave allows for field airflow adjustment Blower: Forward curved, ball bearing, belt driven centrifugal blower. Unit comes completely prewired and includes a 10' power cord with molded plug.  5003.00  View       Porta-Air Portable Air Cleaner  This portable cartridge system is a manually cleaned media air cleaner for use in intermittent duty source capture applications in industry. The Porta Air captures airborne contaminants such as welding smoke, grinding dust, plastic dust and other fine particles. -Abbreviated Specifications- For the Porta-Air Air Cleaner (download PDF at bottom for full specifications) Dimensions: 46" H x 28.5" W x 37" D 375 lbs. Power Input: 120 Vac, 60 hz, 14 amps 208-240 Vac, 60 hz, 8 amps Airflow: 1000 cfm Filtration: Two high efficiency cartridge filters, 382 square feet total (Other filter media and configurations available) Efficiency: Up to 99.8% on 0.5 microns Arm Assembly: 11' long x 8" diameter, Externally supported arm with 360° rotation. BROCHURES: Porta-Air.PDF  5232.00  View       F66 Oil mist Eliminator  The F66 is a self-contained oil mist eliminator, electronic air cleaning system designed for general background cleaning or ducted for source capture applications and efficiently captures a broad range of airborne contaminants including smoke, fumes, soot, light dusts and coolant mists at a rate of up to 2600 CFM with no costly filter replacement. -Abbreviated Specifications- For The F66 Oil Mist Eliminator (download PDF at bottom for full specifications) Dimensions: 41" x 27.5" x 26.5" x 278 lbs Power Input: 110-120 Vac, 60 Hz, Single Phase 12 Amps 208-240 Vac, 60 Hz, Single Phase, 6.6 Amps 208-240 Vac, 60 Hz, Three Phase, 3.8 Amps 440-480 Vac, 60 Hz, Three Phase, 1.9 Amps Electronic Cells: 2 included providing 218 square feet of surface area Efficiency: Up to 95% based on ASHRAE 52-76 test method Power Supply: Self-regulating, dual voltage, industrial rated power supply Motor: 1 hp to 3 hp maintenance free motors available. Accessories: High static fans, source capture plenum or arms, drain kit, impinger assembly *Unit comes completely prewired and includes a 10' power cord with molded plug. Click here to view brochure  4487.00  View       AQE 2000 for Welding Fume Extraction  This portable cartridge system is a self-contained media air cleaner, perfect for welding fume extraction and other source capture applications in industry. The AQE 2000 captures airborne contaminants such as welding smoke, grinding dust, plastic dust and other fine particles. Standard reverse pulse cleaning system extends life of cartridges. -Abbreviated Specifications- (download PDF at bottom for full specifications) Dimensions: 46" H x 28.5" W x 37" D 400 lbs. Power Input: 120 Vac, 60 hz, 14 amps 208-240 Vac, 60 hz, 8 amps Airflow: 1100 cfm Filtration: Two high efficiency cartridge filters, 382 square feet total (Other filter media and configurations available) Efficiency: Up to 99.8% on 0.5 microns Cleaning System: Automatic pulse cleaning system Arm Assembly: 11' long x 8" diameter, Externally supported arm with 360° rotation. BROCHURES: AQE_2000.PDF  6228.00  View       F66V Oil Mist Eliminator  The F66V is a self-contained oil mist eliminator, electronic air cleaning system designed for general background cleaning or ducted for source capture applications and efficiently captures a broad range of airborne contaminants including smoke, fumes, soot, light dusts and coolant mists at a rate of up to 2600 CFM with no costly filter replacement. -Abbreviated Specifications- For The F66V Oil Mist Eliminator (download PDF at bottom for full specifications) Dimensions: 41" x 27.5" x 26.5" x 278 lbs Power Input: 110-120 Vac, 60 Hz, Single Phase 12 Amps 208-240 Vac, 60 Hz, Single Phase, 6.6 Amps 208-240 Vac, 60 Hz, Three Phase, 3.8 Amps 440-480 Vac, 60 Hz, Three Phase, 1.9 Amps Electronic Cells: 2 included providing 218 square feet of surface area Efficiency: Up to 95% based on ASHRAE 52-76 test method Power Supply: Self-regulating, dual voltage, industrial rated power supply Motor: 1 hp to 3 hp maintenance free motors available. Accessories: High static fans, source capture plenum or arms, drain kit, impinger assembly *Unit comes completely prewired and includes a 10' power cord with molded plug. Click here to view brochure  6792.00  View       F73A / F73B Fume Extraction Systems  The F73A and F73B fume extraction systems provide industrial electronic control of welding and metalworking fumes in work areas. The F73A and F73B clean the air of industrial smoke and oil mists. Either source capture techniques or ambient air cleaning can be used to provide healthier working conditions. -Abbreviated Specifications- For the F73A & F73B Fume Extraction Systems (download PDF at bottom for full specifications) Dimensions: 53.75" x 46.5" x 31.6" x 490lbs (A) 495lbs (B) Power Input: F73A1011 - 208-240 Vac, 60 Hz, single phase, 9.2 A F73A1080 - 208-240 Vac, 60 Hz, triple phase, 6 A F73A1081 - 440-480 Vac, 60 Hz, triple phase, 3 A F73A1080 - 208-240 Vac, 60 Hz, triple phase, 9 A F73A1011 - 440-480 Vac, 60 Hz, triple phase, 5 A Electronic Cells: Two cells with 240 sq. ft of collection area each. Efficiency: F73A 5000 CFM up to 99% F73B 6000 CFM up to 99% Power Supply: Self-regulating, dual voltage, industrial rated power supply Motor: F73A 2 hp with sealed ball bearings and thermally protected. F73B 3 hp with sealed ball bearings and thermally protected.  6813.00  View       P-600XL Electrostatic Air Cleaner / Air Purifier  Repeatedly ranked first by independent consumer magazines, the P-600XL is the ultimate in home electrostatic air cleaners. The industrial grade electrostatic cell insures long life while removing airborne particles with up to 99.8% efficiency. Permanent collector cell is dishwasher safe and eliminates the need to purchase expensive, disposable HEPA filters. -Abbreviated Specifications- For the P600-XL Electrostatic Air Cleaner (download PDF at bottom for full specifications) Dimensions: P-600XL - 23.5" x 13.75" x 17" x 46.5lbs Air Flow: 430 CFM Efficiency: 99.8% efficiency per ASHRAE 52.2 Power Input: 120 Vac, 60 hz, 1.4 amps - 1/40 hp shaded pole with sleeved bearings. Filters: Electrostatic and carbon media  774.00  View       F72A/B Electronic Air Cleaner  The F72 in-line electronic air cleaner removes airborne particles such as tobacco smoke, dust, cooking smoke, soot, pollen, bacteria, and cigarette smoke from the circulating air in large residential or light commercial buildings. The F72 is mounted in the return air duct of a forced air system. One or two electronic cells remove airborne contaminants with up to 99 percent efficiency. Rooftop or interior mounted, the F72 is modular and can be configured for an infinite capacity. Outdoor, insulated enclosures available. -Abbrievated Specifications- For this Electronic Air Cleaner (download PDF at bottom for full specifications) Dimensions: A - 25.5" x 29.2" x 21" x 150 lbs B - 49.5" x 29.2" x 21" x 250 lbs Power Input: A - 100-120 Vac, 50/60 Hz 200-240 Vac, 50/60 Hz B - 100-120 Vac, 50/60 Hz 200-240 Vac, 50/60 Hz Electronic Cells: A - One cell with 240 sq. ft of collection area. B - Two cells with 480 sq. ft. of collection area. Efficiency: Up to 99% Power Supply: Solid State, dual voltage and self-regulating BROCHURES: F72.PDF  3260.00  View       XJ - 2 Air Purifier for Air Purification in Healthcare Settings  For air purification, the XJ-2 is the quietest medical-grade room air purifier available that is suitable for hospitals, extended-care facilities, retirement settings and institutional use. Optional digital room pressure monitor gives the CDC specified position certification that negative pressure in the isolation room is maintained. The XJ-2 air purification system is independently lab tested and certified as as a whole air cleaner to a minimum of 99.97% efficiency. This is especially important as simply installing a HEPA air filter into an air cleaner cabinet can not guarantee HEPA performance as penetrations into the air cleaner cabinet, leaks around doors and the integrity of the HEPA seal itself must all be taken into consideration and tested to guarantee performance. Make sure to ask whether the air cleaner was HEPA tested as a whole before purchasing! -Abbreviated Specifications - (download PDF at bottom for full specifications) Air Flow: Up to 1000 cfm Efficiency: Guaranteed Minimum Efficiency: 99.97% on 0.3 microns Dimensions 26.5" L x 14" W x 52.25" H Weight: 140 lbs. Filtration: Pre-filter - 3M filtrate™ (80-85% ASHRAE efficient) HEPA (99.97%) DOP efficient at 0.3 microns) Mini-helic pressure gauge monitors filter status Power Input: 115 Vac, 60 Hz, 4 amps, 400 Watts BROCHURES: XJ-2.PDF  3244.00  View     F61 AutoClean Self-Washing Electrostatic Air Cleaner  F61 AutoClean is an in-line electrostatic air cleaner with an integral, dynamic wash system and programmable control providing the ultimate solution to your air filtration needs. These air cleaners are ideal for heavy tobacco smoke applications, commercial kitchen exhaust or even industrial applications like welding fume and smoke. The F61 AutoClean is available in multiple sizes and is customizable to meet your air filtration needs. Premier wash system both rotates and traverses the electronic collector cells to insure complete cleaning of the collector fins. Optional master clock allows for weekly programming for the ultimate in maintenance free operation. -Abbreviated Specifications- for the F61 AutoClean Electrostatic Air Cleaner (download PDF at bottom for full specifications) Sizing: F61A - 5 ton A/C (2000 cfm) F61B - 10 ton A/C (4,000 cfm) F61C - 20 ton A/C (8,000 cfm) Other Sizes & Configurations Available Dimensions: See Brochure or Consult Air Quality for Detailed Drawings Power Input: 120 Vac, 60 Hz, 3.3 Amps Filters: Aluminum Mesh Impingers & Electronic Collector Cells, Quantity Dependent on Configuration Efficiency: Up to 99% efficiency Accessories: Master Programmable Clock Outdoor Insulated Weather Enclosure Rooftop Installation Package BROCHURE: AutoClean Air Cleaner BROCHURE: Kitchen Exhaust Air Cleaning Systems  7561.00  View       F62B - Electronic Air Cleaners  Featuring the unique Coanada airflow pattern, the F62B electronic air cleaner takes advantage of hot process dynamics - the natural tendency of particles to rise along with the heat created by industrial processes. Polluted indoor air naturally enters the bottom of the air cleaner, and clean air recalculates in all four directions back to the work area. Each F62B creates its own airflow, minimizing sizing and placement problems. This electronic Coanada air filtration unit can be positioned directly above the source of the contaminant to capture pollutants before they have a chance to disperse. -Abbreviated Specifications- For the F62B Electronic Air Cleaners (download PDF at bottom for full specifications) Power Input: 120 Vac, 60 Hz, Single Phase 8.7 Amps 208-240 Vac, 60 Hz, Single Phase, 3.9 Amps 208-240 Vac, 60 Hz, Three Phase, 3.4 Amps 440-480 Vac, 60 Hz, Three Phase, 1.7 Amps Electronic Cells: 2 included providing 218 square feet of surface area Efficiency: Up to 95% based on ASHRAE 52-76 test method Power Supply: Self-regulating, dual voltage, industrial rated power supply Motor: 3/4 hp maintenance free motor. Accessories: Optional Canopy Hood, Drain Pan, Remote Control Kit and Carbon Filter  4513.00  View       Amaircare Roomaid HEPA Filtration System - Black unit  Now available in black Roomaid is ideal for bedrooms, small offices and other areas where space may be limited. Three-Stage Filtration Stage 1: Prefilter Removes large dust particles. Stage 2: HEPA filter 99.97% efficient @ 0.3 microns. Removes dust, pollen, bacteria, animal dander, attached viruses, cigarette smoke, radon daughters and more. Stage 3: V.O.C. filter (Volatile Organic Compounds) Removes hazardous V.O.C.s that may off-gas from things made with chemicals such as cleaners, paints, carpets, and furniture. Up to 5 Year Filter Life HEPA filter lasts up to 5 years and needs no maintenance. Low Electrical Costs It would take 13 1/3 Roomaids to use the same amount of electricity as one regular 60 Watt light bulb. Reusable Prefilter Washable foam prefilter can be used over and over. Specifications Dimensions: 8.5" D 7.5”H Weight: 5 lbs. Air Flow: 20 and 40 CFM Power Consumption: 4.5 Watts HEPA Surface Area: 19 sq.ft. Classification • Portable HEPA 100% Sealed Air Cleaning Device • U.L. and C.S.A. approved Materials: 24 gauge cold rolled steel Finish: Powder coated baked enamel Color: Sandtext White Intake (Upper Section): Three-stage filter assembly Outflow (Lower Section): 330 degree outflow Motor/Fan • Designed for continuous operation • Run tested for 35,000 hours • Service: 12 Volts D.C. Control: 3-position, 2-speed switch Filter Life: V.O.C. filter: 6-12 months HEPA filter: 2-5 years Included Aaccessories • 120 Volt A.C. to 12 Volt D.C. adaptor with 7 foot cord • Spare washable prefilter 100 sqft 250 sqft 500 sqft 750 sqft 1000 sqft 1250 sqft 1500 sqft 1750 sqft 2000 sqft Roomaid 3 ACH 1.2 ACH .6 ACH .4 ACH .3 ACH .24 ACH .2 ACH .17 ACH .15 ACH Based on 8' ceilings Generally speaking, the more air changes per hour (ACH) you can provide, the more effective a HEPA filter can be. 1 ACH provides excellent air cleaning results (higher is recommended for people with sensitivities). Remember: More HEPA is better than less, but some HEPA is better than nothing at all.  147.50  View       AllerAir 5000 MCS Supreme  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes 18 lbs MAC-B carbon filter for noxious gases and odor Micro HEPA filter for particles Unbleached pesticide free cotton muslin pre-filter for larger particles 2 anti-microbial filters to suppress bacteria American made motor with minimal varnish on the windings to prevent off-gassing No glue or bonding agents used in the carbon filter 100%cotton felt gaskets on filters 3 speed 400 cfm Effective for 1500 Sq. ft. Changes air every 30 minutes Replacement Parts: AllerAir 5000 MCS Pre-filter - 6Pk. AllerAir 5000 MCS HEPA Filter AllerAir 5000 MCS Carbon Filter (Screw Cap) AllerAir Special Screwdriver for motor/fan AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir Control Switch & Knob  999.98  View       Allerair 5000 DX air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Intended for heavy-duty, all-purpose air purification purposes, the Allerair 5000 DX air purifier features an extra-deep 26 lbs. carbon bed, which increases dwell time, allowing more chemicals, gases and odors to be absorbed. The DX is also manufactured with a quiet fan, cylindrical shape to maximize airflow and is mounted on casters for easy manoeuvrability. A variety of colors to choose from, smart design, quiet fan system, low price and maintenance cost are factors to consider when choosing an Allerair 5000 air purifier. printable specifications [PDF, 51Kb] heavy-duty all purpose indoor air purifiers Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 54 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 22 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Replacement Parts: AllerAir 5000 DX-Exec Carbon Filter (Refillable) AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir Carbon Refilling Tool AllerAir Control Switch & Knob AllerAir Special Screwdriver for motor/fan  799.98  View       Allerair 5000 air handlers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes The Allerair 5000 air handler features a powerful, four-stage filtration system based on 18 lbs or more of activated MAC-B carbon and a HEPA filter to eliminate airborne particles, chemicals, gases and odors. Deliver clean air all over your home through your ventilation system with a convenient, cost-effective instalation. Protect your air duct against the apparition of mold. Save on your energy bill and protect the environment by recirculating and cleaning the heated indoor air instead of bringing in and heating cold air from exterior. printable specifications [PDF, 171Kb] Clean air all over the house Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 50 lbs. Filtration system Carbon,Ttrue HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 18+ lbs Carbon blend executive, vocarb or custom blend mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. 5 year warranty(extendible to 10) for commercial use. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Replacement Parts: AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir Control Switch & Knob AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir Special Screwdriver for motor/fan  799.98  View       Allerair 5000 D-MCS  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes The Allerair 5000 D-MCS air purifiers feature a main 22 lbs. high efficiency carbon filter, and use no glue or bonding agents, totally inert gaskets, unbleached pesticide free cotton muslin pre-filters and motors with minimal varnish on the windings to prevent off-gassing so the air breathe is really clean of any pollutants. Meticulously designed to help those who suffer from multiple chemical sensitivities , live healthier, happier, more productive lives.. printable specifications [PDF, 90Kb] Air purifiers for multiple chemical sensitivities relief Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 54 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 22 lbs Carbon blend odorless, high efficiency carbon mix. HEPA filter True HEPA captures 99.97% of particles as small as 0.3m Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Replacement Parts: Allerair 5000 D-MCS Carbon Filter (Refillable) AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir Carbon Refilling Tool AllerAir Control Switch & Knob AllerAir Special Screwdriver for motor/fan  1299.98  View       Allerair 5000 DS air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes The Allerair 5000 DS air purifiers feature a unique tar-trapping pre-filter that grabs larger particles and tar, which also extends the life of the HEPA filter. The unit also features a micro-wrap filter to deal with small particles as small as the fine cigarette ash and a 3" extra-deep, 18 lb carbon bed which increases dwell time, allowing more chemicals, gases and odors to be absorbed. The only proven to work method of adsorbing lingering substances that result from tobacco smoke in a closed environment even when active smoking has ceased. printable specifications [PDF,142Kb] Tobacco smoke effects abatement air purifiers Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 52 lbs. Filtration system Carbon, HEPA, Tar-trap filter, Micro-wrap filter. Carbon filter weight 18 lbs Carbon blend special blended for tobacco smoke abatement. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon canisters are refillable. Carbon mix can be customized to fit your specific application. Replacement Parts: AllerAir 5000 Tar Trapping Pre-filter - 10Pk. AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir 5000 D-Exec Carbon Filter (Refillable) AllerAir Carbon Refilling Tool AllerAir Control Switch & Knob AllerAir Special Screwdriver for motor/fan  699.98  View       Allerair 5000 Exec air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes This all-purpose indoor air purifier features a powerful, four-stage filtration system which uses 18 lbs of activated MAC-BT carbon and a HEPA filter to eliminate airborne particles, chemicals, gases and odors. It's cylindrical shape maximizes air flow, while casters provide for easy maneuverability. A variety of colors to choose from, smart design, quiet fan system, low price and maintenance cost are factors to consider when choosing an Allerair 5000 Exec air purifier. printable specifications [PDF, 217Kb] Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 50 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 18 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Replacement Parts: AllerAir Special Screwdriver for motor/fan AllerAir 5000 Exec Carbon Filter AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir Control Switch & Knob  499.98  View       Allerair 5000 Exec UV  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes The Allerair 5000 Exec UV features a 10 Watt Ultraviolet lamp to sterilize airborne antigens and pathogens as well as the same air filtration system as the Exec model. Succesfully used in hospitals, waiting rooms, daycares, and food preparation areas, effective for up to 1500 sq. ft, this unit is our recommendation for or anywhere bacteria or mould may be a problem. printable specifications [PDF, 349Kb] Enhanced UV air purification for homes and offices Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 50 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, 10 W UV lamp Carbon filter weight 18 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. UV system 10 W; 30000microWsec/sqcm; no ozone output; CSA, UL Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. UV lamp yearly (rated for 10000 hours). *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Replacement Parts: AllerAir Control Switch & Knob AllerAir UV Lamp (10 Watt) AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir 5000 Exec Carbon Filter  699.98  View       Allerair 5000 H - HEPA only air purifier  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes This indoor air purifier features a true HEPA filter to eliminate microscopic airborne particles. Prefilters deal with larger particles and help prolonging the life of the HEPA filter. Our recommendation for applications where fine dust, mold spores, dust mites may be a problem. It's cylindrical shape maximizes air flow, while casters provide for easy maneuverability. A variety of colors to choose from, smart design, quiet fan system, low price and maintenance cost are factors to consider when choosing an Allerair 5000 H air purifier. True HEPA air filtration: 99.97% of particles as small as 0.3µ Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 32 lbs. Filtration system HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight - Carbon blend - Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years *Based on use in a normal home environment. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Replacement Parts AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir Special Screwdriver for motor/fan AllerAir Control Switch & Knob  429.98  View       Allerair 5000 Vocarb air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Our recommendation for the removal of volatile organic compounds (VOC's) such as formaldehyde and ammonia. The 18 lbs. MAC-B™ carbon filter is impregnated with special compounds designed for specific VOC problems. Over 40 different blends are available to treat over 4000 airborne chemicals. Available as air handler too. A variety of colors to choose from, smart design, quiet fan system, low price and maintenance cost are factors to consider when choosing an Allerair 5000 Vocarb air purifier. printable specifications [PDF, 217Kb] Volatile organic compounds abatement Technical characteristics Dimensions [H/D] 20.5"/ 15" Shipping weight 50 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 18 lbs Carbon blend vocarb mix, specially impregnated to trap VOCs. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1500 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Replacement Parts: AllerAir 5000 Vocarb Carbon Filter AllerAir Special Screwdriver for motor/fan AllerAir 5000 Series HEPA Filter AllerAir 5000 Pre-filter - 4Pk. AllerAir 5000 Pre-filter - 8Pk. AllerAir 5000 Antimicrobial Wrap - 2Pk. AllerAir 5000 Series Fan AllerAir 5000 Series Motor AllerAir 5000 Series Wall Bracket AllerAir Control Switch & Knob  599.98  View        Allerair AirTube (previously 3000 model)  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Allerair 3000 air purifiers have been replaced by the powerful, compact AllerAir AirTube models. It's total weight is only 14 lbs., and the AirTube offers significant power and filtration in a fully portable format. With it's 7 lbs. of double impregnated activated MAC-B™ carbon, it can adsorb the widest range of airborne chemicals, gasses, odors and VOC's, while the separate medical grade HEPA filter traps up to 99.97% of airborne particles as small as 0.3 microns. The variable speed motor offers a whisper quiet option which makes it ideal for bedroom use or in spaces of up to 400 sq. feet. This all-purpose unit filters particles, airborne, chemicals, gases and odors. It features a cylindrical shape for maximizing the air flow.and a four-stage powerful filtration system which uses 5 lbs of activated MAC-B™ carbon. Offer clean air and enhance the comfort of your guests by using an effective and perfectly safe air purification device in each of your hotel rooms. The Allerair AirTube filters particles, airborne, chemicals, gases and odors. It features a cylindrical shape for maximizing the air flow and a four-stage powerful filtration system based on 7 lbs of activated MAC-B™ carbon and a true HEPA filter, as well as a variable speed blower to easily control the air-flow. Our desktop and fully portable model, units in the 3000 series weighs only 15 lbs. and are specially designed for small spaces up to 100 sq. ft. They feature 5 lbs. of activated Mac-B™ carbon for efficient, long term gas and odor adsorption as well as a HEPA filter which can trap particles as small as 0.3 microns. Recommended for: residential all purpose ; hotel rooms Printable specifications [PDF, 685Kb] Technical characteristics Dimensions [H/D] 16"/ 11" Shipping weight 14 lbs. Filtration system Carbon,True HEPA, Pre-filter, Anti-microbials Carbon filter weight 7 lbs Carbon blend Vocarb mix. Volume of air cleaned 100 CFM , cubic feet per minute. Max room size 400 sq.ft. Meets competitor's specifications for 700 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 1 year Carbon filter each 1 year. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White Replacement Parts: Allerair 3000 Exec Carbon Filter AllerAir 3000 Pre-filter - 4Pk. AllerAir 3000 Pre-filter - 8Pk. AllerAir 3000 Series HEPA Filter AllerAir Control Switch & Knob  299.98  View        Allerair AirTube Jr.  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes The Air Tube Jr. is the ultimate solution for clean and portable air. With a total weight of only 10 lbs., the unit features an amazing 4 lb. bed of impregnated activated MAC-B™ carbon specially designed to remove the widest range of airborne chemicals, gasses, odors and VOC's. It also comes with a HEPA wrap to trap airborne particles like dust. The variable speed motor offers a whisper quiet option, while the cylindrical shape ensures for better air flow. Ideal in small spaces of up to 100sq. feet. Portable, lightweight all purpose indoor air purifiers Technical characteristics: Dimensions [H/D] 16"/ 7" Shipping weight 10 lbs. Filtration system MAC-B granular carbon, HEPA, pre-filter Carbon filter weight 4 lbs Carbon blend executive mix. Rated CFM, free flow 100 CFM , cubic feet per minute. Max covered area 100 sq.ft. Recommended filter replacement schedule* : Prefilters each 1 year HEPA filter each 1 year Carbon filter each 1 year. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4. Prefilters can be vacuumed and reused.  259.98  View       Allerair 4000 DS  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes These air purifiers are specially designed smokers units, which feature a unique tar-trapping pre-filter that grabs larger particles and tar and also extends the life of the HEPA filter. The unit also features a micro-wrap filter to deal with small particles as small as the ash and a 3" extra-deep, 15 pound, carbon bed which increases dwell time, allowing more chemicals, gases and odors to be absorbed. Carbon filters are the only effective way of filtration for removing stalgering odors resulted from tobacco smoke. Tobacco smoke and odors are most effectivelly trapped when your air purifiers works on low speed The Allerair 4000 DS air purifiers feature a unique tar-trapping pre-filter that grabs larger particles and tar, which also extends the life of the HEPA filter. The unit features a micro-wrap filter to deal with small particles as small as the fine cigarette ash and a 3" extra-deep 11 lb carbon bed which increases dwell time, allowing more chemicals, gases and odors to be absorbed. The only proven to work method of adsorbing lingering substances that result from smoking tobacco in a closed environment long after active tobacco has ceased. Compact, smooth, efficient. This compact class of Allerair units was designed to meet various indoor air purification needs in areas of up to 1200 ft². Cost efficient and easy to maintain, these air purifiers feature between 10 and 15 lbs of MAC-B activated carbon. They can be customized with different carbon blends to address your specific environment. Recommended for: tobacco smoke removal Printable specifications [PDF, 142Kb] Technical characteristics Dimensions [H/D] 17.5"/ 15" Shipping weight 40 lbs. Filtration system Carbon, HEPA, Tar-trap filter, Micro-wrap filter. Carbon filter weight 11 lbs Carbon blend special blended for tobacco smoke abatement. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1200 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon canisters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Pewter, Black, Sandstone *Why use an Allerair tobacco smoke control air purifier ? Activated carbon which is the main filtration component of an Allerair air purifier is the only known media proven to effectivelly remove the effects of tobacco smoke long after the active smoking ceased. Dangerous substances, compounds of tobacco smoke (benzene,toluene, arsenic, nicotine,cynide, trichlorethylene...) are lingering to the walls, draps or furniture coatings beeing released as the air circulates through the room. Recirculating a continuous flow of air, at low speed (400 CFM) through an activated carbon filter allows it to be properly cleaned of these nocive pollutants. We added diferent levels of filtration to the carbon filter in order to create a really powerfull air purifier dedicated to control the tobacco smoke in all times. Replacement Parts: AllerAir 4000 D-Exec Carbon Filter (Refillable) AllerAir Carbon Refilling Tool AllerAir 4000 Series HEPA Filter AllerAir 4000 Tar Trapping Pre-filter - 10Pk. AllerAir 4000 Antimicrobial Wrap - 2Pk. AllerAir 4000 Pre-filter - 4Pk. AllerAir 4000 Pre-filter - 8Pk. AllerAir Control Switch & Knob  599.98  View       Allerair 4000 Exec  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes This all-purpose unit filters 99.97% of airborne particles using a true HEPA filter. It features a cylindrical shape for maximizing the air flow, casters for easy maneuverability and a four-stage powerful filtration system which uses 10 lbs of activated MAC-B™ executive mix of carbon to adsorb chemicals, gases and odors from the air you breathe. The Allerair 4000 Exec air purifier features a cylindrical shape for maximizing the air flow, casters for easy maneuverability and a four-stage powerful filtration system which uses 10 lbs of activated MAC-B™ carbon to adsorb chemicals, gases and odors and HEPA filter for particles. A variety of colors to choose from, smart design, quiet fan system, low price and maintenance cost are factors to consider when choosing an Allerair 4000 Exec air purifier. Compact, smooth, efficient. This compact class of Allerair units was designed to meet various indoor air purification needs in areas of up to 1200 ft². Cost efficient and easy to maintain, these air purifiers feature between 10 and 15 lbs of MAC-B activated carbon. They can be customized with different carbon blends to address your specific environment. Recommended for: residential all purpose Printable specifications [PDF, 142Kb] Technical characteristics Dimensions [H/D] 17.5"/ 15" Shipping weight 38 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 10 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1200 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Pewter, Black, Sandstone Replacement Parts: AllerAir 4000 Antimicrobial Wrap - 2Pk. AllerAir 4000 Pre-filter - 4Pk. AllerAir 4000 Pre-filter - 8Pk. Allerair 4000 Exec Carbon Filter AllerAir 4000 Series HEPA Filter AllerAir Control Switch & Knob  439.98  View       Allerair 4000 Exec UV  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes This air purifier features an ultraviolet lamp to sterilize airborne antigens and pathogens as well as the same filtering system as the EXEC model. The Allerair UV units are your perfect air purification choice for waiting rooms, daycares, food preparation areas or anywhere bacteria or mold may be a problem. Particularly, the 4000 Exec UV model covers rooms of up to 1200 ft². The Allerair 4000 Exec UV indoor air purifier, adds a 10 Watt ultraviolet lamp to sterilize airborne antigens and pathogens to its main filtration system based on 10 lbs of activated carbon and a true HEPA filter. Effective for up to 1200 sq. ft, this unit is our recommendation for smaller applications where air filtration and sterilization is needed. Compact, smooth, efficient. This compact class of Allerair units was designed to meet various indoor air purification needs in areas of up to 1200 ft². Cost efficient and easy to maintain, these air purifiers feature between 10 and 15 lbs of MAC-B activated carbon. They can be customized with different carbon blends to address your specific environment. Recommended for: mold abatement ; residential all purpose Printable specifications [PDF, 91Kb] Technical characteristics Dimensions [H/D] 17.5"/ 15" Shipping weight 38 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, 10 W UV lamp Carbon filter weight 10 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1200 sq.ft. UV system 10 W; 30000microWsec/sqcm; no ozone output; CSA, UL Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. UV lamp yearly (rated for 10000 hours). *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Pewter, Black, Sandstone Why use an Allerair UV air purifier ? The use of an UV unit can improve the air quality and ameliorate the hygiene of the ambient air in most environments. These air purifiers can be used to sterilize the air in clinics, laboratories, computer clean rooms, isolation wards, etc. They can be also used to improve the air quality in most homes, and therefore reduce human exposure to a multitude of airborne matter, which would normally increase ones chances of becoming infected. An UV air purifier will kill this matter therefore saving an immune system response, protecting you from the risk of developping allergies. Allerair's UV air purifiers will lower spores count more than if it were done through ventilating a room at a rate of 100 air exchanges per hour. The general normal rate of air exchanges for most homes, over the same period of time is no more than a half dozen times. Replacement Parts: AllerAir 4000 Antimicrobial Wrap - 2Pk. AllerAir 4000 Pre-filter - 4Pk. AllerAir 4000 Pre-filter - 8Pk. Allerair 4000 Exec Carbon Filter AllerAir UV Lamp (10 Watt) AllerAir 4000 Series HEPA Filter AllerAir Control Switch & Knob  639.98  View       Allerair 4000 Vocarb  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Perfect for the removal of volatile organic compounds (VOC's) such as formaldehyde and ammonia. The 10 lbs. MAC-B™ carbon filter is impregnated with special compounds designed for specific VOC problems. Over 40 different blends are available to adsorb and react with VOC's to convert them to harmless substances. Particles as small as 0.3µ are trapped by a true HEPA filter. 10 lbs MAC-B carbon filter for specially blended impregnated activated carbon filter for VOCs (volatile organic compounds) over 40 different blends available for over 4000 airborne chemicals true HEPA filter for particles cleanable pre-filter for larger particles 2 anti-microbial filters to suppress bacteria 3 speed 400 CFM; effective for 1200 Sq. ft. changes air every 30 minutes Compact, smooth, efficient. This compact class of Allerair units was designed to meet various indoor air purification needs in areas of up to 1200 ft². Cost efficient and easy to maintain, these air purifiers feature between 10 and 15 lbs of MAC-B activated carbon. They can be customized with different carbon blends to address your specific environment. Recommended for: chemicals control Printable specifications [PDF, 196Kb] Replacement Parts: Allerair 4000 Vocarb Carbon Filter AllerAir 4000 Antimicrobial Wrap - 2Pk. AllerAir 4000 Pre-filter - 4Pk. AllerAir 4000 Pre-filter - 8Pk. AllerAir 4000 Series HEPA Filter AllerAir Control Switch & Knob  499.98  View       Allerair 6000 DX  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes The 6000 DX air purifiers are designed for heavy duty applications. They feature feature a micro HEPA filter to trap particles and an extra-deep, 36 lbs. carbon bed which increases dwell time, allowing more chemicals, gases and odors to be absorbed. The DX is also manufactured with a quiet fan, cylindrical shape to maximize airflow and is mounted on casters for easy maneuverability. Intended for heavy-duty, all-purpose air purification purposes in areas as wide as 1800 sq. ft., the Allerair 6000 DX air purifier features an extra-deep 36 lbs. carbon bed, which increases dwell time, allowing more chemicals, gases and odors to be absorbed. The DX is also manufactured with a quiet fan, cylindrical shape to maximize airflow and is mounted on casters for easy manoeuvrability. A variety of colors to choose from, smart design, quiet fan system, low price and maintenance cost are factors to consider when choosing an Allerair 6000 air purifier. Powerful, at an affordable price Allerair 6000 air purifiers offer heavy-duty air purification especially for larger homes and businesses. Packed with between 22 and 36 lbs of custom blends of activated carbon, these units are designed to work in spaces of up to 1800 sq. ft. where serious chemical and odor control is a concern. An ideal way to remove fumes from an artist's work space, chemicals from a dry-cleaning establishment or hair-salon and numerous other applications. Recommended for: central air ; all purpose extra heavy-duty Printable specifications [PDF, 601Kb] Technical characteristics Dimensions [H/D] 23.5"/ 15" Shipping weight 65 lbs. Filtration system Carbon, microHEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 36 lbs Carbon blend executive, vocarb, custom carbon mix available. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1800 sq.ft. Air handler option yes Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Black, Sandstone Replacement Parts: AllerAir Carbon Refilling Tool AllerAir Control Switch & Knob AllerAir 6000 Pre-filter - 4Pk. AllerAir 6000 Pre-filter - 8Pk. AllerAir 6000 Antimicrobial Wrap - 2Pk. AllerAir 6000 HEPA Micro Particulate Filter AllerAir 6000 DX-Exec Carbon Filter (Refillable)  899.98  View       Allerair 6000 Exec  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes These all-purpose air purifiers feature a powerful, four-stage filtration system which uses 22 lbs of activated MAC-B™ carbon and a HEPA filter to eliminate airborne particles, chemicals, gases and odors. It's cylindrical shape maximizes airflow, while casters provide for easy maneuverability. This all-purpose indoor air purifier features a powerful, four-stage filtration system which uses 22 lbs of activated MAC-B carbon and a HEPA filter to eliminate airborne particles, chemicals, gases and odors. It's cylindrical shape maximizes air flow, while casters provide for easy maneuverability. A variety of colors to choose from, smart design, quiet fan system, low price and maintenance cost are factors to consider when choosing an Allerair 5000 Exec air purifier. Powerful, at an affordable price Allerair 6000 air purifiers offer heavy-duty air purification especially for larger homes and businesses. Packed with between 22 and 36 lbs of custom blends of activated carbon, these units are designed to work in spaces of up to 1800 sq. ft. where serious chemical and odor control is a concern. An ideal way to remove fumes from an artist's work space, chemicals from a dry-cleaning establishment or hair-salon and numerous other applications. Recommended for: residential all purpose Printable specifications [PDF, 90Kb] Technical characteristics Dimensions [H/D] 23.5"/ 15" Shipping weight 54 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 22 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1800 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal home environment. 5 year warranty(extendible to 10) for commercial use. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Black, Sandstone Replacement Parts: AllerAir 6000 Exec Carbon Filter AllerAir 6000 Series HEPA Filter AllerAir 6000 Pre-filter - 4Pk. AllerAir 6000 Pre-filter - 8Pk. AllerAir 6000 Antimicrobial Wrap - 2Pk. AllerAir Control Switch & Knob  599.98  View       Allerair 6000 Exec UV  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes These air purifiers feature a 10 or 20 Watt ultraviolet lamp to neutralize airborne antigens and pathogens as well as the same powerful filtering system as the 6000 Exec models. They are your perfect choice for large areas that need all-purpose air purification with the added benefit of UV sterilization. The Allerair 6000 Exec UV features a 10 Watt Ultraviolet lamp to sterilize airborne antigens and pathogens besides the main carbon and true HEPA air filtration system. Succesfully used in lasik surgery and other medical facilities, effective for up to 1800 sq. ft, this unit can be your choice for larger homes or offices where bacteria or mold is an issue. Powerful, at an affordable price Allerair 6000 air purifiers offer heavy-duty air purification especially for larger homes and businesses. Packed with between 22 and 36 lbs of custom blends of activated carbon, these units are designed to work in spaces of up to 1800 sq. ft. where serious chemical and odor control is a concern. An ideal way to remove fumes from an artist's work space, chemicals from a dry-cleaning establishment or hair-salon and numerous other applications. Recommended for: mold abatement ; lasik surgery Technical characteristics Dimensions [H/D] 23.5"/ 15" Shipping weight 54 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, 10 W UV lamp Carbon filter weight 22 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 1800 sq.ft. UV system 10 W; 30000microWsec/sqcm; no ozone output; CSA, UL Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. UV lamp yearly (rated for 10000 hours). *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Black, Sandstone Replacement Parts: AllerAir Control Switch & Knob AllerAir UV Lamp (10 Watt) AllerAir 6000 Series HEPA Filter AllerAir 6000 Pre-filter - 4Pk. AllerAir 6000 Pre-filter - 8Pk. AllerAir 6000 Antimicrobial Wrap - 2Pk. AllerAir 6000 Exec Carbon Filter  799.98  View       Allerair 6000 Vocarb  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Designed and built for the removal of volatile organic compounds (VOC's) such as formaldehyde and ammonia these air purifiers feature 26 lbs. MAC-B™ carbon filter, impregnated with special compounds designed for specific VOC problems. Over 40 different blends of carbon are available to capture over 4000 airborne chemicals found in day-by-day use products such as furniture, paint or glue. 22 lbs MAC-B carbon filter for specially blended impregnated activated carbon filter for VOCs (volatile organic compounds) over 40 different blends available for over 4000 airborne chemicals true HEPA filter for particles cleanable pre-filter for larger particles 2 anti-microbial filters to suppress bacteria 3 speed 400 CFM; effective for 1800 Sq. ft. changes air every 30 minutes Powerful, at an affordable price Allerair 6000 air purifiers offer heavy-duty air purification especially for larger homes and businesses. Packed with between 22 and 36 lbs of custom blends of activated carbon, these units are designed to work in spaces of up to 1800 sq. ft. where serious chemical and odor control is a concern. An ideal way to remove fumes from an artist's work space, chemicals from a dry-cleaning establishment or hair-salon and numerous other applications. Recommended for: chemicals control Printable specifications [PDF, 246Kb] Replacement Parts Allerair 6000 Vocarb Carbon Filter AllerAir 6000 Series HEPA Filter AllerAir 6000 Pre-filter - 4Pk. AllerAir 6000 Pre-filter - 8Pk. AllerAir 6000 Antimicrobial Wrap - 2Pk. AllerAir Control Switch & Knob  699.98  View       Allerair 8000 Exec  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes All purpose air purifiers for air cleaning areas as wide as 2000 sq ft. quiet fan, cylindrical shape for maximizing the air flow, on casters for easy maneuverability and a 4 stages powerfull filtration system based on 18 lbs of activated carbon, will eliminate the odors and particles from the indoor air of your home or office. All purpose air purifiers for air cleaning areas as wide as 2000 sq ft. quiet fan, cylindrical shape for maximizing the air flow, on casters for easy maneuverability and a 4 stages powerfull filtration system based on 28 lbs of activated carbon, will eliminate the odors and particles from the indoor air. Your perfect, safest and most cost effective choice for cleaning the air in heavy duty traffic areas such as hotel or motel lobbies, large waiting rooms or other public spaces. Clean air, wider protection Allerair 8000 air purifiers, for commercial applications, are available in diferent configurations to fit specific applications The most effective, low cost indoor air purification sollution available on the market. Common characteristics of the 8000's are, manoeuverability, power and effectiveness, easy maintenance procedures and low exploitation cost. custom carbon blends, diferent filtration options, based on the specific application they are intended to, personalize each model. Recommended for: commercial applications Technical characteristics Dimensions [H/D] 29.5"/ 15" Shipping weight 75 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 28 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 2000 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Black Replacement Parts: AllerAir 8000 Exec Carbon Filter AllerAir 8000 Pre-filter - 4Pk. AllerAir 8000 Pre-filter - 8Pk. AllerAir 8000 Series HEPA Filter AllerAir Control Switch & Knob  999.98  View       Allerair 8000 Exec UV  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Carbon and uv air purifiers for air cleaning areas as wide as 2000 sq ft. quiet fan, cylindrical shape for maximizing the air flow, on casters for easy maneuverability and a 5 stages powerfull filtration system based on 18 lbs of activated carbon and UV germicidal light tp sterilize the cleaned air, will eliminate the odors, particles and micro-organisms such as mold spores from the indoor air of your home or office. The Allerair 8000 Exec UV features a 10 Watt UV lamp to sterilize airborne antigens and pathogens besides the main 28 lb carbon filter that neutralize chemicals and the true HEPA filter intended to trap particles as small as 0.3 microns. A 20 W germicidal lamp is available as an option. Powerfull air purification systems the 8000 Exec UV air purifiers are specially designed to eliminate chemicals, particles as small as 0.3 microns and to sterilize the air in up to 2000 sq ft lasik or dental surgery facilities. Clean air, wider protection Allerair 8000 air purifiers, for commercial applications, are available in diferent configurations to fit specific applications The most effective, low cost indoor air purification sollution available on the market. Common characteristics of the 8000's are, manoeuverability, power and effectiveness, easy maintenance procedures and low exploitation cost. custom carbon blends, diferent filtration options, based on the specific application they are intended to, personalize each model. Recommended for: lasik surgery Technical characteristics Dimensions [H/D] 29.5"/ 15" Shipping weight 75 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, 10 W UV lamp Carbon filter weight 28 lbs Carbon blend executive mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 2000 sq.ft. UV system 10 W; 30000microWsec/sqcm; no ozone output; CSA, UL Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. UV lamp yearly (rated for 10000 hours). *Based on use in a normal home environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Black Replacement Parts AllerAir Control Switch & Knob AllerAir UV Lamp (10 Watt) AllerAir 8000 Exec Carbon Filter AllerAir 8000 Pre-filter - 4Pk. AllerAir 8000 Pre-filter - 8Pk. AllerAir 8000 Series HEPA Filter  1199.98  View       Allerair 8000 Vocarb  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Specially impregnated carbon filters for cleaning VOC's [volatile organic compounds] from areas as wide as 2000 sq ft. quiet fan, cylindrical shape for maximizing the air flow, on casters for easy maneuverability and a 4stages powerful filtration system based on 28 lbs of activated carbon, will eliminate the odors, particles and micro-organisms such as mold spores from the indoor air of your home or office Over 40 different blends available for over 4000 airborne chemicals. Allerair 8000 Vocarb air purifiers are based on a 28 lb specially impregnated carbon filter for cleaning VOC's [Volatile Organic Compounds] from areas as wide as 2000 sq ft. Prefilters and HEPA filter to trap particles, quiet fan, cylindrical shape for maximizing the air flow, on casters for easy maneuverability make them your best tool in dealing with odor or chemicals situations in wide rooms. Allerair offers over 40 different blends of custom carbon. Clean air, wider protection Allerair 8000 air purifiers, for commercial applications, are available in diferent configurations to fit specific applications The most effective, low cost indoor air purification sollution available on the market. Common characteristics of the 8000's are, manoeuverability, power and effectiveness, easy maintenance procedures and low exploitation cost. custom carbon blends, diferent filtration options, based on the specific application they are intended to, personalize each model. Recommended for: chemicals control Technical characteristics Dimensions [H/D] 29.5"/ 15" Shipping weight 75 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 28 lbs Carbon blend vocarb mix. Volume of air cleaned 400 CFM , cubic feet per minute. Max covered area 2000 sq.ft. Recommended filter replacement schedule* Prefilters each 3 months HEPA filter each 5-7 years Carbon filter each 2-5 years. *Based on use in a normal environment. Carbon and HEPA filters can be replaced individually. Prefilters are sold in packages of 4, covering 1 year of functioning. Prefilters can be vacuumed and reused. Carbon filters are refillable. Carbon mix can be customized to fit your specific application. Available colors: White, Black Replacement Parts AllerAir 8000 Pre-filter - 4Pk. AllerAir 8000 Pre-filter - 8Pk. AllerAir 8000 Series HEPA Filter Allerair 8000 Vocarb Carbon Filter AllerAir Control Switch & Knob  1199.98  View       Allerair 9150 fume extractors for welding/sudoring  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Air cleaners specifically built to trap chemicals and gases from welding fumes. Air draw is calculated so the quality of the welding process is not influenced. One or two hoses may equip the unit in order to serve one or two workstations. The Allerair 9150 Welding fumes extractor offers 4 stages of filtration, starting with the spark arrestor which is in place to retain sparks that can damage the filters, a pre-filter to trap larger particles, a large carbon filter and a HEPA filter Custom built to fit exactly your air purification needs. The Allerair 9000 air purifiers are designed to be easily adapted to your specific needs of air purification. Common characteristics of the 9000 series are manoeuverability, power and effectiveness, easy maintenance procedures and low exploitation cost. Different body size, custom carbon blends, diferent filtration options, based on the specific application they are intended to, personalize each model. Recommended for: welding shops Printable specifications [PDF, 306Kb] Technical characteristics Dimensions [H/L/l] 16"/ 20"/24" Shipping weight 160 lbs. Filtration system Spark Arrestor, Prefilter, Carbon Filter, HEPA Filter Carbon filter weight 40 lbs HEPA filter 90%, 2" deep HEPA Filter Carbon blend custom blend mix. Volume of air cleaned 560 or 735 CFM, cubic feet per minute Features and available options 6" flange to attach one or two specialized hoses. Can serve one or two workstations. 40 specialty blends of carbon available. Carbon mix can be customized to fit your specific application. Carbon filters are refillable. Motor can be 560 or 735 CFM (model 9175 Welding). Standard housing on galvanized steel, paint is optional. Replacement Parts AllerAir 9000 Exec Carbon Filter - 40 lbs. AllerAir 9000 Pre-filter 1" - 10Pk. AllerAir 9000 Series HEPA Filter 2" - 95% AllerAir Control Switch & Knob  1699.98  View       Allerair 9400 CM ceiling mounted air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Heavy duty air cleaning in restaurants, bars, public areas Saves energy by cleaning and recirculating the heated indoor air instead of exhausting it Application specific carbon blends for over 4000 specific chemicals 1" particle trap pre-filter to capture large particles Pleated post filter. Available filtration system configurations 99.7%, 2” True HEPA Filter, to capture respirable size particles, as small as 0.3 microns and 15 lbs of special carbon for adsorbing chemicals gases and odors or 2 x 15 lbs of special carbon for adsorbing gases and odors or 15 lbs of MAC-B special carbon and bag filter Printable specifications [PDF, 466Kb] Technical characteristics Dimensions [H/W/D] 16"/19.75"/16" Shipping weight 65 lbs Filtration system see available configurations above Carbon blend application specific carbon blends available for volatile organic compounds and specific chemicals as found in tobacco smoke. Volume of air cleaned 360, 560 and 735 CFM, cubic feet per minute, your choice of motor Available colors: black, sandstone Replacement Parts: AllerAir Bag Filter - 60% AllerAir 9000 Series HEPA Filter 2" - 99.97% AllerAir 9000 Exec Carbon Filter - 15 lbs. AllerAir 9000 Pre-filter 1" - 10Pk.  999.98  View       Allerair 9650 Smoke control air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Medical grade, small, mobile, powerful air purifiers with convenient 12" flange for negative air as an option. Featuring a 4” mini pleat medical grade HEPA to increase area of filtration. HEPA filter is warm rolled to prevent cracking at folds, is laser tested for integrity and DOP tested. Captures 99.97% of particles as small as 0.3 microns Unique adjustable pressure seal maximizes filtration efficiency Custom built to fit exactly your air purification needs. The Allerair 9000 air purifiers are designed to be easily adapted to your specific needs of air purification. Common characteristics of the 9000 series are manoeuverability, power and effectiveness, easy maintenance procedures and low exploitation cost. Different body size, custom carbon blends, diferent filtration options, based on the specific application they are intended to, personalize each model. Recommended for: smoke control Replacement Parts: AllerAir 9000 Series HEPA Filter 4" AllerAir 9000 Exec Carbon Filter - 30 lbs. AllerAir 9000 1" Tar Trapping Pre-filter - 10Pk.  1499.98  View     Allerair Air Rhino 2000 dual speed  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Previously known as Allerair air wash 2000 dual speed. Conceived for restorators the allerair aw 2000 Air Rhino systems bring value to your business by letting you do the job properly and in less time. HEPA air cleaners which can be easily transformed in activated carbon filters to effectively remove odors and chemicals, allerair's Air Rhino systems are recognized as an industry's standard. On casters for easy maneuverability and built in steel easy to carry and easy to operate we guarantee that our Air Rhino systems are the best air purifiers to use after a sinister situation, at the market lowest price the distinctive characteristic of the "special edition " model is its carbon filter added as a bonus to the main HEPA filter. Used in fire or water restoration, chemicals, gas and odor abatement, renovation, indoor construction, mold or asbestos abatement, the Allerair Air Rhino system is the versatile, cost effective air cleaning tool any contractor should use. Offering interchangeable, carbon or HEPA filtration this industrial air cleaner gives you flexibility in solving a wide range of indoor air issues from dust remediation to odor control. This unit comes with a 2 speed control offering up to 1000 CFM, cubic feet per minute of circulated and cleaned air. Optionally the Air Rhino may be equiped with germicidal UV lamps to sterilize the air once cleaned. The Air Rhino system is easy to manoeuver grace of its 4 handles and 4 industrial, ball-bearing wheels. Maintenance is practically not necessary . Filter change procedures are quick and easy. Air Rhino systems - interchangeable filters Allerair offers a full range of powerful Air Rhino Systems designed to address the advanced and varied air cleaning needs required in industrial use at the lowest market price. Air purification specialists are available to recommend a combination of features and carbon blends to target even the most specific particulate, chemical and odor control needs. These powerful units can be built with either a true HEPA filter or up to 100 lbs of MAC-B™ activated carbon, or a customized combination of both. They also feature easy-change filters, removable hoses, convenient handling and are all DOP tested . Options include a UV germicidal lamp, pressure seal, gel seal and numerous other features to offer the most complete and effective purifier available. Printable specifications [PDF, 650Kb] Recommended for : restoration industry ; mold abatement Technical characteristics Dimensions [H/L/l] 26.5"/ 37"/26.5" Shipping weight 165 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 7.5 lbs, option of 100 lbs carbon for odor control HEPA filter Medical grade, 24'/24"/11.5" HEPA filter Carbon blend custom blend mix. Volume of air cleaned 1000 CFM Available configurations and options HEPA filter, 7.5 lbs carbon 1299.48 USD 100 lbs of carbon, no HEPA 1899.48 USD 18 guage polished, galvanized steel body for durability on all Air Rhino systems. 40 specialty blends of carbon available. Carbon mix can be customized to fit your specific application. Carbon filters are refillable. Prefilters and dust filters are sold in packages of 8. 10W, 20 or 40W UV germicidal lamps available. Horizontal or vertical configurations. Detailed schematic of an Allerair Air Rhino system: Replacement Parts: AllerAir AR-2000 Carbon Filter AllerAir AR-2000 HEPA Filter AllerAir AR-2000 Pre-filter (Bakery) - 1Pk. AllerAir Control Switch & Knob AllerAir UV Lamp (20 Watt) AllerAir UV Lamp (10 Watt)  1299.98  View     Allerair Air Rhino 2000 variable speed  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Previously known as the Allerair air wash 2000 variable speed. Conceived for restorators the allerair aw 2000 Air Rhino systems bring value to your business by letting you do the job properly and in less time. HEPA air cleaners which can be easily transformed in activated carbon filters to effectively remove odors and chemicals, allerair's Air Rhino systems are recognized as an industry's standard. On casters for easy maneuverability and built in steel easy to carry and easy to operate we guarantee that our Air Rhino systems are the best air purifiers to use after a sinister situation, at the market lowest price the distinctive characteristic of the "special edition " model is its carbon filter added as a bonus to the main HEPA filter. Used in disaster restoration, chemicals, gas and odor abatement, renovation, indoor construction, mold or asbestos abatement, the Allerair Air Rhino system is the versatile, cost effective air cleaning tool any contractor should use. Offering interchangeable, carbon or HEPA filtration this industrial air cleaner gives you flexibility in solving a wide range of indoor air issues from dust remediation to odor control. The variable speed control allows rates between 0 and 1300 CFM. Optionally the Air Rhino may be equiped with germicidal UV lamps to sterilize the air once cleaned. The Air Rhino system is easy to manoeuver grace of its 4 handles and 4 industrial, ball-bearing wheels. Maintenance is practically not necessary . Filter change procedures are easy and well documented. Air Rhino systems - interchangeable filters Allerair offers a full range of powerful Air Rhino Systems designed to address the advanced and varied air cleaning needs required in industrial use at the lowest market price. Air purification specialists are available to recommend a combination of features and carbon blends to target even the most specific particulate, chemical and odor control needs. These powerful units can be built with either a true HEPA filter or up to 100 lbs of MAC-B™ activated carbon, or a customized combination of both. They also feature easy-change filters, removable hoses, convenient handling and are all DOP tested . Options include a UV germicidal lamp, pressure seal, gel seal and numerous other features to offer the most complete and effective purifier available. Printable specifications [PDF, 641Kb] Recommended for : restoration industry ; mold abatement Technical characteristics Dimensions [H/L/l] 26.5"/ 37"/ 26.5" Shipping weight 165 lbs. Filtration system Carbon, HEPA, Pre-filter, Anti-microbials, UV option Carbon filter weight 7.5 lbs, option of 100 lbs carbon for odor control HEPA filter Medical grade, 24'/24"/11.5" HEPA filter Carbon blend custom blend mix. Volume of air cleaned 1300 CFM, option of 2000 CFM Available configurations and options HEPA filter, 7.5 lbs carbon 1499.48 USD 100 lbs of carbon, no HEPA 2099.48 USD 18 guage polished, galvanized steel body for durability on all Air Rhino systems. 40 specialty blends of carbon available. Carbon mix can be customized to fit your specific application. Carbon filters are refillable. Prefilters and dust filters are sold in packages of 8. 10W, 20 or 40W UV germicidal lamps available. Horizontal or vertical configurations. 2000 CFM and high capacity filters. Available housing options Vertical Air Rhino System Hooded Air Rhino System Hood may be used to clean particular exposed objects such as clothes. Hood is lightweight and easy detacheable. Height of the air cleaner including hood: 61" Replacement Parts: AllerAir AR-2000 Carbon Filter AllerAir AR-2000 HEPA Filter AllerAir AR-2000 Pre-filter (Bakery) - 1Pk. AllerAir UV Lamp (10 Watt) AllerAir UV Lamp (20 Watt) AllerAir Control Switch & Knob  1499.98  View       Allerair I-6500 A air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes The I-6500 A air purifiers come standard with an 80 lb. carbon gas phase filter, a large HEPA filter and a 1500 CFM motor. The unit can also be upgraded to include a 160 lb. carbon gas phase filter. The I-6500 line of air purifiers offers the ultimate air quality solution for industrial, commercial or medical environments.Models can be customized with a combination of various MAC-B™ activated carbon blends and 12” deep true HEPA filter which together can trap 99.97% of air borne contaminants and neutralize up to 4000 different noxious chemicals. Models in this series also come with a unique pre-filter that actually prolongs the life of the HEPA filter. Ideal for large retail stores, museums gymnasiums or anywhere where dust or odor problems are a concern. DOP certification is available for the I-6500 air purifiers. Printable specifications [PDF, 466Kb] Recommended for : retail outlets ; industrial applications ; medical applications Technical characteristics Dimensions [H/W/D] 70"/21"/24.5 Shipping weight 250-340 lbs. (depending on filter configuration) Filtration system see available configurations below Carbon blend application specific carbon blends available for volatile organic compounds and specific chemicals. Volume of air cleaned 1500 CFM , cubic feet per minute. Miscellaneous system pressure gauge, internally fused for maximum current protection,highly recommended for heavy dust and odor removal Available colors: Sandstone Replacement Parts: AllerAir I-6500 HEPA Filter 12" AllerAir I-6500 Carbon Filter - 80 lbs. AllerAir I-6500 Carbon Filter - 100 lbs. AllerAir I-6500 HEPA Filter 2" AllerAir I-6500 Pre-filter 2" - 10Pk. AllerAir I-6500 Pre-filter 2" - 5Pk. AllerAir Control Switch & Knob  3999.98  View       Allerair I-6500 A-HO air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes Versatile air purifiers that come in various configurations; with activated carbon filter sizes varying from 80 to 160 lbs, HEPA filters width as deep as 12.5 " and 1000 CFM blowers our i-6500 A air purifiers are the imbatable choice for commerces or light industry applications. Solid body made on coated painted steel on caster for maneuverability make our i-6500 A the desired choice for industrial environments. Letting you chose between different filtration sytems such as recirculating the air or clean room quality or to specify the size of the carbon filter personalize these air purifiers to fit exactly with what you intend to use them for. Allerair highly reccomends these air purifiers for use in heavy traffic retail stores and industrial facilities although they can be the air purification sollution wherever high dust or odor problems may appear. The I-6500 line of air purifiers offers the ultimate air quality solution for industrial, commercial or medical environments. Models can be customized with a combination of various MAC-B™ activated carbon blends and 12” deep true HEPA filter which together can trap 99.97% of air borne contaminants and neutralize up to 4000 different noxious chemicals. Models in this series also come with a unique pre-filter that actually prolongs the life of the HEPA filter. Ideal for large retail stores, museums gymnasiums or anywhere where dust or odor problems are a concern. DOP certification is available for the I-6500 air purifiers. Printable specifications [PDF, 466Kb] Technical characteristics Dimensions [H/W/D] 69"/21"/24.5 Shipping weight 175 lbs. Filtration system 12" deep, gel sealed on a knife edge medical gradeHEPA filter Volume of air cleaned 1000 CFM , cubic feet per minute. Miscellaneous system pressure gauge, recessed, easy to read control panel internally fused for maximum current protection, highly recommended for fine particles removal Air-flow ducted system, negative air or positive air options Available colors: Sandstone Replacement Parts: AllerAir I-6500 Pre-filter 2" - 10Pk. AllerAir I-6500 Pre-filter 2" - 5Pk. AllerAir I-6500 Gel Sealed HEPA Filter  3999.98  View       Allerair I-6500 B air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes This model features a large HEPA filter, a 1000 CFM motor and anti-microbial pre-filters or an 80 lb. carbon gas phase filter. Optional features include a 2 “ mini-pleat HEPA pre-filter. The I-6500 line of air purifiers offers the ultimate air quality solution for industrial, commercial or medical environments.Models can be customized with a combination of various MAC-B™ activated carbon blends and 12” deep true HEPA filter which together can trap 99.97% of air borne contaminants and neutralize up to 4000 different noxious chemicals. Models in this series also come with a unique pre-filter that actually prolongs the life of the HEPA filter. Ideal for large retail stores, museums gymnasiums or anywhere where dust or odor problems are a concern. DOP certification is available for the I-6500 air purifiers. Printable specifications [PDF, 466Kb] Recommended for : odor and chemicals abatement applications Technical characteristics Dimensions [H/W/D] 48"/21"/24.5 Shipping weight 175-250 lbs. (depending on filter configuration) Filtration system see available configurations below Carbon blend application specific carbon blends available for volatile organic compounds and specific chemicals. Volume of air cleaned 1500 CFM , cubic feet per minute. Miscellaneous system pressure gauge, internally fused for maximum current protection,highly recommended for heavy dust and odor removal Available colors: Sandstone Replacement Parts: AllerAir I-6500 Pre-filter 2" - 10Pk. AllerAir I-6500 Pre-filter 2" - 5Pk. AllerAir I-6500 HEPA Filter 12" AllerAir I-6500 Carbon Filter - 80 lbs.  2799.00  View       Allerair I-6500 C air purifiers  We can ship this unit from USA or Canada. Customers in Canada do not pay custom broker fees or import taxes This model features a large HEPA filter, a 750 CFM motor and anti-microbial pre-filters or an 80 lb. carbon gas phase filter. Optional features include a 2 “ carbon pleat or 2” carbon granular filter as well as a 2” mini pleat HEPA filter The I-6500 line of air purifiers offers the ultimate air quality solution for industrial, commercial or medical environments.Models can be customized with a combination of various MAC-B™ activated carbon blends and 12” deep true HEPA filter which together can trap 99.97% of air borne contaminants and neutralize up to 4000 different noxious chemicals. Models in this series also come with a unique pre-filter that actually prolongs the life of the HEPA filter. Ideal for large retail stores, museums gymnasiums or anywhere where dust or odor problems are a concern. DOP certification is available for the I-6500 air purifiers. Printable specifications [PDF, 466Kb] Recommended for : odor and chemicals abatement applications Technical characteristics Dimensions [H/W/D] 48"/21"/24.5 Shipping weight 175-250 lbs. (depending on filter configuration) Filtration system see available configurations below Carbon blend application specific carbon blends available for volatile organic compounds and specific chemicals. Volume of air cleaned 730 CFM , cubic feet per minute. Miscellaneous system pressure gauge, internally fused for maximum current protection,highly recommended for heavy dust and odor removal Available colors: Sandstone Replacement Parts: AllerAir I-6500 HEPA Filter 12" AllerAir I-6500 Carbon Filter - 80 lbs. AllerAir I-6500 Pre-filter 2" - 10Pk. AllerAir I-6500 Pre-filter 2" - 5Pk.  2499.98  View  << Previous Next >>

Call Us: (800) 578-5939 or (760) 632-7286 // M-F 6 a.m - 6 p.m. and Sat-Sun 7 a.m - 3 p.m. Pacific Standard Time