Commercial Air Filtration

Interceptor 2000 Commercial Air Cleaning System
The industrial workhorse of our Commercial Air Cleaning Systems 2000 CFM ceiling mount HEPA air cleaning system. 1 unit recommended for every 2000 square feet (I-2000) Think you''ve got a tough indoor pollution problem? Meet the solution! This is the Interceptor 2000, the industrial workhorse of our Air Cleaner Systems. Capable of removing dust, smoke, oil mist, chemicals; you name it. This unit is a money-saver by allowing you to recycle your interior air, rather than exhaust your valuable conditioned air to the outside. Saves you money year-round! 1 unit recommended for every 1500 - 2000 sq. ft. (approximately) - 2000 C.F.M. - Blower - Direct drive centrifugal - 48" L x 24" W x 24" H - 16 gauge steel cabinet - Torsion Flex Motor with Auto Shut-off. - Shipping Weight - 125 lbs. - 115v, 10 Amp - Three Filter System: - 4" pleated pre-filter - Multi-pocket Bag Filter - HEPA Final Stage Filter - All systems carry a lifetime motor/blower warranty - All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.

1895.00

View

Mark 10 Ceiling Mount
It is recommended that the Mark 10 Air Cleaner be installed in areas that have 9-10 foot ceiling heights. The Mark 10 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 1000 square feet. • 1000 C.F.M. • Ceiling or Wall Mount • 35-1/2" L x 25-1/2" W x 13" H • Woodgrain or White Finish • Shipping Weight - 100 lbs. • 4.2 amps, 120V, Two speed • 10 ft. power cord, 3 prong grounded plug • Three Filter System: HEPA, Charcoal, Pre-Filter • All systems carry a lifetime motor/blower warranty • All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.

1495.00

View

Mark 15 Ceiling Mount
Our extremely attractive, self-contained systems require very low maintenance (approximately 30 seconds per month). It is recommended that the Mark 15 Air Cleaner be installed in areas that have 10-12 foot ceiling heights. The Mark 15 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 1500 sq. ft. • 1500 C.F.M. • Ceiling or Wall Mount • 35-1/2" L x 25-1/2" W x 17-1/2" H • Woodgrain or White Finish • Shipping Weight - 125 lbs. • 6.2 amps, 120V, Two speed • 10 ft. power cord, 3 prong grounded plug • Three Filter System: HEPA, Charcoal, Pre-Filter • All systems carry a lifetime motor/blower warranty • All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.

1595.00

View

Mark 20 Ceiling Mount
Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. It is recommended that the Mark 20 Air Cleaner be installed in areas that have 12 foot ceiling heights or more. The Mark 20 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 2000 sq. ft. • 2000 C.F.M. • Ceiling or Wall Mount • 36" L x 25" W x 25" H • Woodgrain or White Finish • Shipping Weight - 167 lbs. • 9.0 amps, 120V, Two speed • 10 ft. power cord, 3 prong grounded plug • Three Filter System: HEPA, Charcoal, Pre-Filter • All systems carry a lifetime motor/blower warranty • All electrical components and fan motor are UL Listed and CSA Certified. Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that's been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.

1895.00

View

IQAir Inflow W125
Free Shipping on this Item!**USA 48 States only Enjoy controlled clean air ventilation An IQAir® filter system combined with an InFlow W125 can be installed to draw outdoor air into an indoor environment. In this setup, an IQAir serves as a ventilation system, bringing in oxygen-rich outdoor air and a filtration system, which removes undesirable outdoor pollutants such as pollen, mold spores, dust and exhaust soot. As a result, fresh and filtered outside air comes into the room. Create clean positive pressure areas An IQAir® filter system combined with an InFlow W125, which draws air into a room will in most cases allow the creation of a positive pressure. This positive pressure helps to clean the air in a room by constantly flushing out air pollutants and by preventing outside pollutants from entering the room. Application Examples: Protection of allergy sufferers from pollen exposure in their home Protection of patients from microbiological exposure (e.g. aspergillus) in a hospital Creation of clean research or manufacturing areas (controlled environments) Protection of plant control rooms from corrosive contaminants Creation of a clean zone within a home or office which helps to prevent outdoor pollution from nature, factories, traffic, agriculture to enter. Using an InFlow W125 with an IQAir system can improve indoor air quality by: diluting polluted air with clean air flushing out air pollutants reducing influx of new outside pollutants due to a build-up of positive pressure by increasing oxygen content in indoor air (when outdoor air is being drawn in) Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.

545.00

View

IQAir OutFlow W125
Free Shipping on this Item!**USA 48 States only Application The OutFlow W125 kit allows filtered air from any IQAir® filtration device to be directed through a wall or window vent. The OutFlow W125 kit can be used to: create clean areas deliver filtered air into cleanrooms or to the outside create negative pressure areas create positive pressure areas Clean Area and Cleanroom Use The supply of filtered air into an environment helps reduce air pollution in that environment by dilution and the creation of positive pressure, which reduces the infiltration of polluted air from outside the environment. With the OutFlow W125 kit, the filtration device is positioned outside the clean area or cleanroom, saving valuable space and reducing noise exposure. It also eliminates the danger of housing leakage, making it suitable even for certified cleanrooms. Emission Control Legislation limits the emission of polluted air to the outdoors. The OutFlow W125 filters air before it is exhausted outdoors to help meet environmental emission standards. Isolation Areas Infection control (e.g. tuberculosis) in hospitals and similar facilities demands the creation of negative pressure environments to reduce the spread of airborne microorganisms. The OutFlow W125 permits operation of the filter unit from within the isolation area, eliminating the danger of housing leakage into the surrounding area. The OutFlow W125 kit easily modifies any IQAir filtration unit. Simply replace the top module of any standard IQAir filtration unit with the TopFlow adapter. All that is needed to install the ducting, wall tube and vent is a 5.2" opening in a wall or window. The OutFlow W125 kit also includes a damper and a protective mesh grille which prevents backdrafts and entry of coarse particles when the system is not in use. The large 5" diameter of the ducting ensures low air resistance. The aluminum duct may be freely flexed to allow control over the desired vent location. It is expandable in length from 10" in its original compressed state to 39" when fully extended. Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.

495.00

View

IQAir HG FlexVac
Free Shipping on this Item!**USA 48 States only Control of VOCs and microbiological contaminants and odors specific to dental offices and facilities. Applications - Drill aerosol control - Microorganism control - Mercury vapor - Disinfectant control IQAir Dental HG FlexVac Post-Filter Sleeves Set of 4 - replace every 1-3 yrs Media Cartridges Set of 4 - replace every 1-3 yrs Pre-Filter replace every 6-18 months All systems come complete with filters, owners manual, set of 4 casters (except GCX series and Cleanroom H13), 6 foot power cord, and certificate of guaranteed performance. Specifications Other Information 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Particle Post-Filter Sleeves 5. Gas and Odor Filter Cartridges 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. Pre-Max Pre-Filter (Class H11) 10. Dual Floor Air Intake General Number of Selectable Fan Speeds 6 Air Delivery (with new filters installed) per Speed 1 - 35 cfm 2 - 60 cfm 3 - 95 cfm 4 - 125 cfm 5 - 150 cfm 6 - 250 cfm Maximum Coverage Area 900 sq ft System Efficiency for Particles 99% or more for .3 microns 95% for smaller particles Power Requirements 115 VAC 50-60 Hz. The entire electrical system is UL certified. Energy Consumption (Max) 215 W Dimensions H 28" W 15" D 16" Net Weight (including filters) 51 lbs Warranty Period 1 yr on unit including fan motor, excluding filters Filters Filter Configuration 1 Pre-Filter 4 Hg Cartridges 4 Post Filter Sleeves Pre-Filter DOP 97% high accumulation media 25 sq ft area Gas Phase Filter Approx. 11 lbs of impregnated activated carbon Post Filter Sleeves 98% DOP (.3 microns) electrostatic media Average Filter Life Pre-Filter 6-18 months, Gas phase filter: 1-3 yrs, Post filter 1-3 yrs Housing Number of Housing Modules 6 Housing Material PC-ABS (fire resistant) and ABS(UV-stabilized) non-offgasing, high impact resistant Color of Main Housing/Arms Light Gray/White Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree opening on top of unit Fan Fan Type Centrifugal fan, backward curved, single inlet, UL/CSA registered Bearings Maintenance-free steal ball bearings Speed Regulation Voltage reductions via capacitor switching Electronic Control Panel Control Panel Finish Polyester overlay panel Main Display Liquid crystal display, 16 character x 2 line Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs Display Languages English, French, German, Italian, Spanish Customized Pollution Control for Dental Offices The IQAir® Dental Hg FlexVac is a mobile air cleaning system with a flexible suction arm. It is designed to capture drill aerosols, abrasion powder and mercury vapors during dental procedures. The pollutants are captured by a flexible suction duct before they can spread to other areas in the room. The IQAir Dental Series units are based on the IQAir GC design and contain filter cartridges, which optimize them for the pollutants found in dental offices. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses). The neutral white and light grey design integrate perfectly in all dental offices. Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.

1274.95

View

IQAir GCX VOC
Free Shipping on this Item!**USA 48 States only Volatile Organic Compounds Advanced air cleaning device for volatile organic compounds, odors, and particulates. Applications - Chemical control - Control of the following: Benzene, Butane, Carbon tetrachloride, Chlorine, Chloroform, Chloropicrin, Cyclohexane, 1.1 Dichloroethane, Ethylene oxide, Freon 11, Indole, Methyl chloride, Methyl chloroform, Methylene chloride, Nitrobenzene, Phosgene, Pyridine, Sulfuric acid, Toluene, Xylene Particle Post-Filter Sleeves Set of 4 - replace every 2-3 yrs Media Cartridges Set of 4 - replace every 2-3 yrs Pre-Filter replace every 6-18 months All systems come complete with filters, owners manual, set of 4 casters (except GCX series and Cleanroom H13), 6 foot power cord, and certificate of guaranteed performance. Specifications Other Information 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Particle Post-Filter Sleeves 5. Gas an Odor Filter Cartridges 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. Pre-Max Pre-Filter (Class H11L) 10. Dual Floor Air Intake General Number of Selectable Fan Speeds 5 Air Delivery (with new filters installed) per Speed 1 - 40 cfm 2 - 60 cfm 3 - 90 cfm 4 - 140 cfm 5 - 270 cfm Maximum Coverage Area 1200 sq ft (based on maximum fan speed and an 8.5 ft ceiling) System Efficiency for Particles 99% or more at 0.3 microns 95 for smaller particles Power Requirements 115 VAC 50-60 Hz The entire electrical system is UL certified. Energy Consumption (Max) 195 W Standby Energy Consumption 2.5 W Power Cable Grounded Detachable 6 foot Dimensions H 40" W 15" D 16" Net Weight (including filters) 80 lbs Warranty Period 1 yr on unit including fan motor, excluding filters Casters Optional casters (Mobility 56) sold separately. Filters Number of Filter Stages 3 (particle pre-filtration, gas absorption and particle post-filtration) Total Number of Replacement Filters 9 (1 HEPA-type pre-filter, 4 gas cartridges and 4 post-filter sleeves) Particulate Pre-Filter Mini-pleat HEPA filter with efficiency of 98% at .3 microns Amount of Gas Phase Filter Media Between 18 and 25 lbs. depending on media Cartridge Design Galvanized, reusable metal cylinders Particulate Post-Filter Four electrostatically charged fiber media sleeves Filter Life Pre-Filter 6-18 months Sleeves 2-3 years Cartridges up to 3 years (filter life is dependant on the operating environment) Housing Number of Housing Modules 10 Housing Material PS-ABS and ABS(UV-stabilized) Color of Main Housing/Arms Light Gray/Blue Air Intake Two side openings at base of unit Air Outlet Via diffuser with horizontal 320 degree opening on top of unit Fan Fan Type Centrifugal fan, backward curved, single inlet Bearings Maintenance-free steal ball bearings Speed Regulation Voltage reductions via capacitor switching Electronic Control Panel Control Panel Finish Polyester overlay panel Main Display Liquid crystal display, 16 character x 2 line Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs Display Languages English, French, German, Italian, Spanish Customized Gas and Odor Control The GCX Series is IQAir’s highest capacity air cleaner range with customized filters for specific gaseous contaminants and odors. Just like a professional gas mask, IQAir maximizes filter efficiency for different gases and odors by offering the right filter cartridge. And while gas and odor control are a particular strength of these systems, the GCX Series also offers excellent filtration efficiency for particles. The main difference between the GCX and its smaller sibling the GC is, that the GCX contains 25 lbs. of gas phase media while the GC Series contains 12 lbs. In addition the GCX Series features larger pre- and post-particle filters. As a result the maximum air delivery of the GCX is about 20% higher than that of the GC. Gas Cartridge Technology Each IQAir® GCX model contains four reusable filter cartridges with up to 25 lbs. of gas phase media. A wide range of differently formulated cartridges are available to maximize the filtration efficiency for different types of gaseous contaminants. Since IQAir® gas filter cartridges are reusable, replacing them is not only economical, but also environmentally friendly. High-Efficiency Particulate Filtration The particulate filtration GCX units complements the gaseous filtration process by removing over 97% of particles before they can reach the gas phase media. This increases the efficiency and life of the media by preventing its pores from clogging. The GXC units' overall filtration efficiency for particles is 97% at .3 microns. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses) Free Shipping on this Item!**USA 48 States only Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product.

1495.00

View

SmokeMaster X-11Q
The SMOKEMASTER® X-11Q. Designed to fit unnoticeably into a drop ceiling. It features optimum noise control, which is ideal for quiet environments . It comes woth a three-speed airflow to 1100 cfm for any commercial environment, for example: offices, retail showrooms, restaurants, bars, etc. It can filter tobacco smoke, odors, VOCs, allergens, pet dander and any other small particles with up to 97% efficiency. The Quiet Solution 3-speed fan allows for quiet operation and great efficiancy and effectiveness, ideal for private offices, conference rooms, and quiet environments/areas. The Hidden Solution The SmokeMaster range mounts flush with the ceiling, and are perfect for any office area, including: Lobby/Reception Areas Sales Offices Conference Rooms Computer Room Executive Offices Clerical Areas Cafeterias Phone or Reservation Areas Employee Lounges The Smokemaster X-11 can easily mount in the 2'x 4' space of a drop ceiling panel, and it will give you maximum air cleaning performance in any office area. The Smokemaster units feature modular construction for ease of maintenance and cleaning. Special mounting hardware will be included for quick installation, as there will be no need for ductwork. The Economical Solution The qualityof your indoor air can affect you in more ways than one, because the comfortability of your clients/customers will determine how long they'll stay. The conflicts between smokers and non-smokers will thus be solved, without interrupting the work flow, smoker seperation and/or costly remodeling. How a Smokemaster Works Contaminant particles receive an electrical charge as they pass into the electronic cell, and they are then attracted and held to the oppositely charged collector plates, almost the same way metal filings are collected by a magnet. The air vent provides dilution control of gaseous contaminants. An activated carbon filter is optional, and can be used to adsorb odors and gases which will further freshen the air. Key Benefits The Smokemaster's Coanda Air Pattern draws the dirty air into the unit and then it recirculates the clean air four directions, for immediate and thorough results. The Smokemaster X-11 mounts flush in a 2' x 4' space of a drop ceiling panel, and it cleans up to 1100 cubic feet of air per minute. Four air outlet grilles can be rotated to customize the air pattern. Up to 96% of airborne pollen, dust, smoke and dirt in the air can be cleaned. It's Quiet and Energy Efficient Specifications The X-Series electronic air cleaners are self-contained units and are designed to install flush with a drop ceiling. Efficiency: Up to 96% efficiency on airborne particles such as cigarette smoke and dust. Diagnostics: Power supply is indicated by a status light, and a test button indicates collector operation. Motor: Quiet, energy efficient, permanent split capacitor fan motor is vibration isolation mounted. Air Vent: Provides dilution control of gaseous contaminants. Detailed Specs: Model: X-11Q Capacity/Electrical Ratings: 120V/60Hz Low Speed: 500 cfm/2.4 Amp., 200 Watts Medium speed: 700 cfm/2.7 Amp., 230 Watts High Speed: 1100 cfm/3.4 Amp., 270 Watts Dimensions: 46 3/4" x 22 3/4" x 13 9/16" (fits 2' x 4' tile opening) Installed Weight: 83 lbs. Shipping Weight: 101 lbs.

1641.00

View

SmokeMaster C12
The C12 air cleaner is ideal for mounting to solid ceilings. It can capture of both particulate and gaseous contaminants, especially cigarette smoke. Electrostatic cells and impregnated carbon filter is highly effecient. Odors, tobacco smoke, pollen, dust, vapors and many other irritants are removed, eliminating the need to purchase additional filters. It has a 3 speed fan, which quietly and efficiently cleans an area using the Coanda Air Flow Pattern - air cleaning with airflow from 800 cfm to 1250 cfm for any commercial environment--offices, retail showroom, restaurants, bars and more. How It Works By means of a process called "Electrostatic Precipitation" airborne contaminates are trapped. Particles are first given a strong electrical charge in the charging section of each cell. The charged particles will then be attracted and held by the collection section of the cell until it is cleansed at regular intervals. The Smokemaster has its own fan which circulates the air through the unit. Year After Year Your Smokemaster is equipped with lightweight (9 1/2 lbs.) two stage cells, other than the less efficient and costly fiber filters which need to be replaced periodically, and/or electronic air cleaners with plate-type cells. These components provide Smokemaster with air cleaning efficiency and can trap particles so small that about 7000 would stretch across a dot. No periodic mechanical services are required, or tools are needed to be purchased, as the cells have no moving parts, which can wear down after a time. Smokemasters key feature is the multidirectional air pattern Smokemaster's success is hugely due to the "Coanda Aerodynamic Principle." Most of the other air cleaners can recirculate the air in only one direction and this limits the amount of contaminated air that can reach the air cleaner. Smokemaster's unique four-way method of air recirculation is multi-directional, causing this air cleaner to get the maximum amount of contaminated air to the machine very efficiently. More air will reach your Smokemaster while it eliminates other annoying drafts. This creates comfort for people and much cleaner air. Key Benefits Coanda Air Flow Pattern Discharge Louvers - 4 sides Color Options - Ivory, Woodgrain, Black Removable Prefilters and Grille Metal mesh prefilters catch the larger particles before it enters the electronic cells. A System Indicator Lamp Monitors the electrical output, which can automatically indicate any system malfunction. Three-Speed Control: Low 800cfm Medium l 050cfm High l 250cfm Energy efficient motor Two electronic cells remove easily with attached grip handles. A Voltage doubler circuit provides more efficient air cleaning with a compact cell. A hinged Access Door allows for easy access to components for periodic cell and prefilter cleaning. Safety interlock discharges all power when door is opened. Built-in test button assures collector performance. Optional Accessories Wash kit Wall Mounting Kit Remote 3-Speed Switch Plate Assembly Serviceable components simply unplug for replacement in the event of a service being necessary. The air cleaner can be easily mounted on a ceiling or wall. Specifications: Model C-12 Capacity (cfm) Low Speed (800) Med. Speed (1050) High Speed (1250) Electrical Ratings Voltage and Frequency - 120V ac 60 Hz Current and Power Consumption - Low Speed 2.4A, Med. Speed 2.7A, High Speed, 3.3A Dimensions (inches) Length: 25 Width, 25 Depth, 11 1/2 Weight Shipping 75 lbs. Effectively removes airborne particles down to 0.01 micron with up to 97% efficiency. (1 micron = 1/25,400th inch) Power 3 prong 10 foot power cord plugs into standard grounded outlet. Installation The Smokemaster is easily mounted on the ceiling or wall and plugs into a regular 120 volt outlet. The best location for this unit is the closest point to the concentration of smoke and dirt producing activities. A qualified representative can best advise you as to the capacity and sizing requirements for your specific needs. Maintenance Lightweight all aluminum prefilters and cells are quickly and easily cleansed by being soaked in any conventional wash container. Cleaning intervals must be determined by pollution density in the area being cleaned.

1689.00

View

SmokeMaster X-400
The SMOKEMASTER® X400. Designed to fit unobtrusively into a drop ceiling, and features optimum noise control--ideal for quiet environments. The three-speed airflow from 175 cfm to 400 cfm is designed for any commercial environment, whether it be offices, retail showroom, restaurants, bars and more. Tobacco smoke, odors, VOCs, allergens, pet dander and any other small particles are all filtered by the X400 It's essential in today's life that your office is comfortable, healthy and smoke-free, as clean air improves productivity, health and morale of employees - clean air simply creates a better business. The Economical Solution Indoor Air Quality affects your bottom line in more ways than one. And you can put an end to the conflicts between smokers and non-smokers, without interrupted work flow, smoker segregation or costly remodeling. The Hidden Solution Since these models mount flush in the ceiling, they're perfect for any office area, including: Lobby/Reception Areas Sales Offices Conference Rooms Computer Room Executive Offices Clerical Areas Cafeterias Phone or Reservation Areas Employee Lounges The Smokemaster X-400 replaces a 2'x 2' ceiling panel whihc thus makes it an ideal purchase for all smaller office areas, scattered in larger spaces - directly above smokers' workstations, for example. All Smokemaster units feature modular construction for easy cleaning and maintenance. Special mounting hardware is included for quick installation, and no ductwork is required. The Quiet Solution Smokemaster's 3-speed fan allows for quiet operation without sacrificing effectiveness. It's ideal for private offices, conference rooms, or other areas where noise levels may be a factor. How a Smokemaster Works Contaminant particles, such as those in cigarette smoke, receive an electrical charge as they pass into the electronic cell, and are then attracted to oppositely charged collector plates, where they are held. The air vent provides dilution control of gaseous contaminants. Optional activated carbon filter adsorbs odors and gases to further freshen the air. Key Benefits Coanda Air Pattern draws dirty air into the Smokemaster and clean air is recirculated in four directions, for thorough and immediate results. Model X-400 is 2' x 2', mounts flush in ceiling, and cleans up to 400 cubic feet of air per minute. Clean the air in your office of up to 96% of airborne smoke, pollen, dust and dirt. Quiet Energy Efficient Specifications The X-Series electronic air cleaners are self-contained units designed to install flush with a drop ceiling. Efficiency: Up to 96% efficient on airborne particles such as cigarette smoke and dust. Diagnostics: Status light indicates power supply operation. Test button indicates collector operation. Motor: Quiet, energy efficient, permanent split capacitor fan motor is vibration isolation mounted. Air Vent: Provides dilution control of gaseous contaminants. Detailed Specs: Model: X-400 Capacity/Electrical Ratings 120V/60Hz Low Speed 175 cfm/0.4 Amp., 50 Watts Medium speed 275 cfm/0.55 Amp., 65 Watts High Speed 400 cfm/0.8 Amp., 80 Watts Dimensions 22 3/4" x 22 3/4" x 13 1/2" (fits 2' x2' tile opening) Installed Weight 44 lbs. Shipping Weight 54 lbs.

1060.80

View

NQ Clarifier Medical
The NQ Clarifier is an outstanding portable air purification system. The unit has 4 levels of filtration as well as an ultraviolet purification zone that destroys bacteria, viruses, fungi, allergens and molds. Its compacity in terms of weight, size and mobility make this equipment ideal for all general applications. Within a very short period of time the system filters and purifies, thus improving the indoor air quality in various locations such as residential, commercial, medical, industrial or military applications. Efficacy proven in real conditions for over 10 years (references available on request). The ultraviolet disinfection allows our units to offer a high protection without utilising any chemicals or added materials. General features: - High efficiency 99.97% HEPA - Mobile, quickly deployed - Autonomous - System utilising recognised processes - Low Maintenance - Economical The NQ Clarifier purifies air with 2 recognized processes: FILTRATION - Four stages of mechanical filtration: - 10 µm particulate pre-filter - Formulated activated carbon filter - HEPA filter ASHRAE - H13 (99.97% at 0.3 µm) - Carbon impregnated post filter UV DISINFECTION - Two or four germicidal UV lamps providing a total UV dosage of 13,000 to 26,000 µWsec/cm² to inactivate micro-organisms Working Principle: - The air is recirculated to 4 inlet grills (7’’ x 10’’ - 178 x 254 mm) - Particles > 10 µm are trapped by the pre-filter - The air then passes trough an activated carbon filter, optimised to treat odors problems, VOC’s and chemical pollutants - After 99.97% of particles and micro-organisms > 0.3 µm are filtered by an HEPA filter H13 - Viruses, bacteria, fungi, allergens and molds are finally destroyed by UVC germicidal irradiation in the UV zone - Purified air is discharged via a post filter and a patented air discharge system “Topflow” that maximises the room effective air change rate Technical features Height 28’’ - 710 mm Width 15’’ - 380 mm Depth 14’’ - 360 mm Weight 48 lbs - 22 kg Power supply 115 V - 60 Hz / 230 V - 50 Hz Power 136 Watts (high Speed) Air volume 350 cfm - 165 l/s - 595 m³/h Noise level 55 dBA - (high speed) Pre-filter > 10 microns Activated carbon filter 15 lbs - 6.8 kg HEPA filter ASHRAE - H13* - DOP - 99,97% > 0.3 µm UV zone Clarifier Standard - 2 x 9 Watt UVGI lamps Clarifier Medical - 4 x 9 Watt UVGI lamps UV dosage Clarifier Standard - 13,000 µWsec/cm² Clarifier Medical - 26,000 µWsec/cm² Post filter Carbon impregnated *According to EN 1822 Maintenance required Pre-filter Pre-filter 2 months (clean), 6 months (change) Activated carbon and post filters 24 months max. (18 months recommended) HEPA filter 24 months max. (18 months recommended) UVGI lamps 1 year NQ Clarifier Medical brochure US download NQ Clarifier Medical brochure EU download NQ Clarifier Standard&Medical technical data sheet download

999.00

View